Installing ... 2nd time ...
Hi all! My Powerbook is repaired! :) but ... on the new harddisk there is only MacOS installed ... ... and so the story begins ;) I´ve installed Debian and MacOS ... then I configured yaboot to can boot MacOS too. Worked ... fine :) but after rebooting, MacOS booted not yaboot ... :( If I do the mkofboot etc. command from the install shell this works but Yaboot is not booted. Only MacOS. How can I say OF to boot from bootstrap ? and: why has MacOS overwritten the settings of the Open Firmware ? Thanks for your help!!! Michael PS. Hardware: Pismo 400 / 128 MB / 10 GB /dev/hda9 -> Bootstrap /dev/hda10 -> MacOS /dev/hda11 -> Exchange 500 MB HFS /dev/hda12 -> Debian /dev/hda13 -> Swap -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
upgrade stable -> unstable doesn´t work
Hello! I want to upgrade from stable to unstable but this doesn´t work. When Debconf will be configured many Perl 5.6 errors with modules are printed on the screen. :( Is the Perl oder Debconf package broken at the moment ? Greets, mfl -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Re: upgrade stable -> unstable doesn´t work
On Fri, Jan 26, 2001 at 12:01:04PM +0100, Sven LUTHER wrote: > On Fri, Jan 26, 2001 at 11:59:14AM +0100, Bastien Nocera wrote: > > Quoting Michael Flaig <[EMAIL PROTECTED]>: > > > > > Hello! > > > > > > I want to upgrade from stable to unstable but this doesn´t work. > > > When Debconf will be configured many Perl 5.6 errors with modules > > > are printed on the screen. :( > > > > > > Is the Perl oder Debconf package broken at the moment ? > > > > Same problems upgrading to Sid. I think that some modules needed by debconf > > aren't updated yet. And on Sid, ldconfig is broken and segfaults with an > > "Illegal Instruction" just about everytime. > > > > BTW, which version is supposed to be the more unstable ? unstable (woody) > > or > > testing (sid) ? Isn´t good ... I hate to use XF3 ... it´s so slow because of xfbdev :( Are there XF402 packages for potato ? > > You got it the other way around, unstable is sid and testing is woody. > > note that unstable will ever be sid, and that as woody is approaching release, > it will be first frozen and then stable, while a new testing is created. > > And naturally sid is considered more unstable than testing, but then testing > is not yet full of stuff, i think. > > More or less, testing is potato and upgreaded with packages that are in > unstable for sufficient time so that the more obvious errors are already > discovered. > > Friendly, > > Sven Luther -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
PMUD
Hi All...
My PMUD does not work ... I don´t know why ...
I get IDE Timeout ... this shouldn´t happen when i close the display.
In messages I get this:
Feb 15 10:18:49 saratoga kernel: hda: lost interrupt
Feb 15 10:18:59 saratoga kernel: hda: timeout waiting for DMA
Feb 15 10:18:59 saratoga kernel: ide_pmac_dmaproc: chipset supported ide_dma_tim
eout func only: 14
Feb 15 10:18:59 saratoga kernel: hda: irq timeout: status=0x50 { DriveReady Seek
Complete }
Feb 15 10:19:09 saratoga kernel: hda: timeout waiting for DMA
Feb 15 10:19:09 saratoga kernel: ide_pmac_dmaproc: chipset supported ide_dma_tim
eout func only: 14
Feb 15 10:19:09 saratoga kernel: hda: irq timeout: status=0x50 { DriveReady Seek
Complete }
Feb 15 10:19:19 saratoga kernel: hda: lost interrupt
Feb 15 10:19:29 saratoga kernel: hda: timeout waiting for DMA
Feb 15 10:19:29 saratoga kernel: ide_pmac_dmaproc: chipset supported ide_dma_tim
eout func only: 14
Feb 15 10:19:29 saratoga kernel: hda: irq timeout: status=0x50 { DriveReady Seek
Complete }
Feb 15 10:19:39 saratoga kernel: hda: timeout waiting for DMA
Feb 15 10:19:39 saratoga kernel: ide_pmac_dmaproc: chipset supported ide_dma_tim
eout func only: 14
Feb 15 10:19:39 saratoga kernel: hda: irq timeout: status=0x50 { DriveReady Seek
Complete }
Feb 15 10:19:39 saratoga kernel: hda: DMA disabled
Feb 15 10:19:39 saratoga kernel: ide0: reset: success
Feb 15 10:19:53 saratoga kernel: hde: lost interrupt
Feb 15 10:20:03 saratoga kernel: hde: lost interrupt
Has anybody had this Problem ? How can I solve it ?
My Powerbook G3 / 400 is detected as Type 12 : Ibook.
Kernel is Paulus´ 2.4.1
thanks,
mfl
--
Michael Flaig ... PROLinux (www.pro-linux.de)
News, free web support and discussion forum
MobilePhone: +49 179 2200049
Re: PMUD
Hi!
On Thu, Feb 15, 2001 at 01:28:11PM +0200, Tuomas Kuosmanen (sp) wrote:
> On 15 Feb 2001 10:30:35 +0100, Michael Flaig wrote:
> > Hi All...
> >
> > My PMUD does not work ... I don´t know why ...
> > I get IDE Timeout ... this shouldn´t happen when i close the display.
>
> It doesnt work because the G3 firewire pbook ("Pismo") sleep code in the
> kernel is not working correctly yet.
> So dont close the display, or you could script it to shutdown -h when
> you close the lid if you edit /etc/power/powerctl.
> Look for the function pwrctl_Core99().
Although I disable everthing with hdparam the Hard Discs works like wild
only when I close the lid ... strange.
I think this could be an Bug in the used kernel 2.4.1 ... perhaps ...
cu,
Michael
>
> Best wishes,
>
> Tuomas Kuosmanen
>
>
>
>
> Tuomas Kuosmanen - Art Director -
> Ximian - [EMAIL PROTECTED] -
> www.ximian.com
--
Michael Flaig ... PROLinux (www.pro-linux.de)
News, free web support and discussion forum
MobilePhone: +49 179 2200049
Re: PMUD
Hi All! On Thu, Feb 15, 2001 at 05:11:09PM +0100, Michel Dänzer wrote: > Sergio Brandano wrote: > > > I have the same computer, > > No, you don't: > > > > My Powerbook G3 / 400 is detected as Type 12 : Ibook. > ^^^ > > Michael has a Pismo. Sleep isn't supported for those by the kernel yet. When do you think support is in Kernel ? Where is the Problem ? Apple ? Why does Apple change the pmu chip ? Greets, Michael > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Searching for Bootdisks for IBM Thinkpad pSeries 820
Hello! I want to install Debian on an IBM pSeries 820 Thinkpad. Has anybody yet installed Debian on such an Machine ? Where can I get working Bootdisks, because the PReP ones at ftp.debian.org didn´t work. I´ve got the Debian PowerPC CD here but can´t boot. Thanks for you help ... greets, mfl -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Perl 5.6 ...
Hi! I´ve Problems with Perl in Sid ... perl-base can´t be installed perl: Depends: perl-base (= 5.6.1-2) but 5.6.0-21 is installed Depends: perl-modules (= 5.6.1-2) but it is not installed In i386 there are newer packages ... 5.6.1-3) I can´t compile from source because dpkg-dev can´t be installed without solving the perl problems :-( has anybody newer packages ? or can compile them and send me the packages ? thanks, mfl -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
[mfl: Re: Perl 5.6 ...]
Sorry, forgotten to post to list ... - Forwarded message from Michael Flaig - Date: Wed, 30 May 2001 18:59:51 +0200 From: Michael Flaig To: "David J. Roundy" <[EMAIL PROTECTED]> Subject: Re: Perl 5.6 ... User-Agent: Mutt/1.2.5i In-Reply-To: <[EMAIL PROTECTED]>; from [EMAIL PROTECTED] on Wed, May 30, 2001 at 07:32:54AM -0700 On Wed, May 30, 2001 at 07:32:54AM -0700, David J. Roundy wrote: > On Wed, May 30, 2001 at 05:58:33AM -0800, Ethan Benson wrote: > > > > huh? Michael's message is a dpkg dependency error, rm -rfing random > > directories will change nothing in that regard (unless its > > /var/lib/dpkg). > > It was a dependency error, which I believe arises because dpkg fails on > perl-base, because /usr/share/doc/perl is owned by two packages at once, > and dpkg refuses to overwrite it (or something like that), which makes > perl-base fail to install. Yes, you are right it was a dependency error. perl-base doesn´t install and then the dependency is broken. I´ve forgotten to post the other error, too. sorry! will try it with deleting the directory ... thanks for now ... Michael > -- > David Roundy > http://civet.berkeley.edu/droundy/ -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049 - End forwarded message - -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Re: quik + 2.4.4
EMail from Jaume Teixi <[EMAIL PROTECTED]> to debian-powerpc@lists.debian.org with message <[EMAIL PROTECTED]> On Tue, 03 Jul 2001 20:37:58 + Jaume Teixi wrote: > I'm putting debian on an oldworld powerbook g3 > > now just installed kernel 2.4.4 but then quik doesn't found initrd and > it > says > > kernel panic: unable to mount root > > and kernel 2.2.19 boots ok > > so what should I put on quik.conf in order to get ok with initrd ? > > with append="fake_initrd" doesn't works hi! sure you need this ? not only forgotten ramdisk or ext2 support ? check your kernel for this options ... cu, mfl > > thanks from barcelona, > > teixi. > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Using Display and VGA Port !?
Hi! I want to connect an projector to the vga port and show some information on the wall at meetings. Can someone help me with the XF86Config? Under MacOS there are 2 Screens if I connect to the VGA Port. I have XFree4, sid, Kernel2.4 ... Thanks for your help! greets, Michael
Using Display and VGA Port !?
Hi! I want to connect an projector to the vga port and show some information on the wall at meetings. Can someone help me with the XF86Config? Under MacOS there are 2 Screens if I connect to the VGA Port. I have XFree4, sid, Kernel2.4 ... Thanks for your help! greets, Michael PS. First post was with wrong address... sorry!
2.4.6benh dmasound on pismo
Hi ! I rsynced the 2.4-benh from penguinppc the last 3 days and compiled many kernels that had a problem with dmasound. Driver initialize: dmasound_pmac: Awacs/Screamer Codec Mfct: 1 Rev 3 PowerMac Screamer DMA sound driver rev 016 installed Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.06 Write will use4 fragments of 32768 bytes as default Read will use4 fragments of 32768 bytes as default and later I get : dmasound_pmac: error 2 And if I do cat vmlinux > /dev/dsp I get Device or resource busy. Have I done something wrong ? Last rsync sunday night ~ MET 23:00 Thanks, Michael
Re: JAVA on DebianPPC
EMail from "Lorenzo De Vito" <[EMAIL PROTECTED]> to with message <[EMAIL PROTECTED]> On Wed, 18 Jul 2001 17:59:28 +0200 Lorenzo De Vito wrote: > What's the better way to run Java on DebianPPC ? I've looked for Java 2 on > www.sun.com but I've found only versions for x86 or Sparc. > There is good compatibility with LinuxPPC Java Version and that distribuited > from Sun? There are debian packages ? Don´t know if there are debian packages but under http://penguinppc.org/usr/java/ you can get tar.gz of java jdk1.3.0patchlevel1 greets, Michael
xfree86 keymaps ...
Hi... I have upgraded my sid again and now the macintosh de nodeadkeys of xfree86 wont work. Have switched to konsole keymap. But x failes to read the keymap correctly ... How can I get x86 keycodes on my pismo ? have benh 2.4.6 kernel ... thanks for your help ... cya, Michael
Re: es keymaps advise needed
EMail from Jaume Teixi <[EMAIL PROTECTED]> to debian-powerpc@lists.debian.org, debian-x@lists.debian.org with message <[EMAIL PROTECTED]> On Tue, 31 Jul 2001 01:41:35 +0200 Jaume Teixi wrote: Hi, It worked :-) Thanks a lot ... my config now is: Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "AutoRepeat""100 50" # If the keyboard layout is fscked, try this #Option "XkbDisable" Option "XkbKeycodes" "macintosh" Option "XkbSymmbols" "macintosh/de" Option "XkbGeometry" "macintosh" Option "XkbLayout" "de" Option "XkbOptions""ctrl:nocaps" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbVariant""nodeadkeys" #Option "LeftAlt" "Meta" #Option "RightAlt" "Meta" #Option "ScrollLock""Compose" #Option "RightCtl" "Control" EndSection > hello, > > I-m running sid on a 1998 oldworld powerbook g3 with xfree86 4.1.0-1 > > at the end for get the keyboard working ok this was the setup: > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbKeycodes" "macintosh" > Option "XkbSymmbols" "macintosh/us" > Option "XkbGeometry" "macintosh" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > Option "LeftAlt" "Meta" > Option "RightAlt" "Meta" > Option "ScrollLock""Compose" > Option "RightCtl" "Control" > EndSection > > now I want to get my X supporting spanish keyboard maps and also kbd or > console-tools > console-tools powerppc currently only supports us, de, and fr keymaps. what is different to de or us keyboards? > > could you explain-me where could I get the info for make these keyboard maps ? Well, I made a Germen Keymap for my own for console but it worked not as good as i hoped ... Look at this : [EMAIL PROTECTED]:/usr/share/keymaps/mac$ ls mac-de2-ext.kmap.gz mac-fr2-ext.kmap.gzmac-us-ext.kmap.gz mac-de-latin1-nodeadkeys.kmap.gz mac-fr3.kmap.gzmac-us-std.kmap.gz mac-de-mfl.kmap.gzmac-us-dvorak.kmap.gz gunzip the kmap.gz the keycodes for the key are listed in the file you get after extracting you can get console keycodes from showkey command ... to test this make sure you can login via ssh oder telnet if you can´t find the keys ;) hope I helped you a bit ... for x11 i have no idea how to change the keymap. but perhaps someone else!? cya, Michael > > tx! > > > > -- > Jaume Teixi > CTO > 6TEMS - Ducform, SA > http://www.6tems.com > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: Gnuermic compilation
EMail from Paul Talacko <[EMAIL PROTECTED]> to debian-powerpc@lists.debian.org with message <[EMAIL PROTECTED]> On Wed, 1 Aug 2001 10:07:07 +0100 Paul Talacko wrote: > Hi all, > > My laptop is off being repaird *again* by Sony, so I'm trying to get gnumeric > for my potato on this ppc machine. When I download the source (from > gnome.org) and > run configure, I get > the error that libxml is too old and I need to upgrade. Currently, I have > libxml 1.8.2. The latest gnumeric needs l.8.14, and an older version that I > also downloaded wants 1.8.6. > > So, my questions are: is 1.8.14 or greater available in 'unstable', or already > compiled format? If I upgrade libxml, will I break anything else? Finally, > is > there an already compiled version of gnumeric that will run on debianppc > potato, which would make my life easier? Hi! ii gnumeric 0.67-1 GNOME SpreadSheet In sid you can get this one ... Why don´t upgrade to sid or woody ? Had no big problems with my pismo running sid for more than a half year ... only some dependencies of kde and gnome were broken sometimes. Perhaps you can downcompile the sid libxml and sid gnumeric on potato ... look at www.debian.org at dependecies so you have all libs to compile libxml. cu, Michael > > Thanks > > > > Paul > > > -- > > > Paul Talacko > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: xfree-4.1.0-1 vs benh-kernel
> > I am running 2.4.7-pre7 now, which sounds like 2.4.6. Wakeup and tapping > are OK. I have a problem with the modem though, as it is not recognised. > thats´s right. The modem doesn´t work on my pimso, too. it worked a few weeks ago with old 2.4.0testxxx paulus kernel. I´m rsyncing right now and will test if the problem appears with 2.4.8pre3-benh as it does with 2.4.7 ... > > > Michael > > > > _ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: sleep on Prismo
EMail from Marshal Wong <[EMAIL PROTECTED]> to debian-powerpc@lists.debian.org with message <[EMAIL PROTECTED]> On 03 Aug 2001 20:06:12 +0900 Marshal Wong wrote: > Hello, > > From reading the list, it seems that the current benh kernel has sleep > working more or less properly on the PowerBook Prismo. Can someone > confirm this? hi! had starting problems with kernel 2.4.4 (i think) from benh rsync. but since 2.4.6 everything works fine :-) > > And if is is so, what do I have to do to make pmud work with it? > Should I just comment out the hack in /etc/power/pwrctl that forces > the computer to shut down on sleep? Compile in pmud support and then install package pmud. perhaps you habe to comment something out in /etc/power/pwrctl Send my conf with this mail. greets, Michael PS. My Pismo is build around oktober 2000. Works fine. > > Thanks! > > Marshal > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > pwrctl Description: Binary data
xchat cannot be build on power-pc sid ...
Hi! xchat cannot be build ... unmet build dependencies ... dpkg-buildpackage: source package is xchat dpkg-buildpackage: source version is 1.8.2-1 dpkg-buildpackage: source maintainer is Davide Puricelli (evo) <[EMAIL PROTECTED]> dpkg-buildpackage: host architecture is powerpc dpkg-checkbuilddeps: Unmet build dependencies: gdk-imlib-dev, libgdk-pixbuf-gnome-dev, libperl-dev, libgnome-dev, libzvt-dev, python2-dev dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. dpkg-buildpackage: (Use -d flag to override.) Build command 'cd xchat-1.8.2 && dpkg-buildpackage -b -uc' failed. E: Child process failed
Fw: xchat cannot be build on power-pc sid ...
Sorry ! Was my fault!!! Could get the libs after apt-get update ... sorry ... Michael Beginn der weitergeleiteten Nachricht: Date: Tue, 14 Aug 2001 09:37:30 +0200 From: Michael Flaig <[EMAIL PROTECTED]> To: debian-devel@lists.debian.org, DebianPPC Subject: xchat cannot be build on power-pc sid ... Hi! xchat cannot be build ... unmet build dependencies ... dpkg-buildpackage: source package is xchat dpkg-buildpackage: source version is 1.8.2-1 dpkg-buildpackage: source maintainer is Davide Puricelli (evo) <[EMAIL PROTECTED]> dpkg-buildpackage: host architecture is powerpc dpkg-checkbuilddeps: Unmet build dependencies: gdk-imlib-dev, libgdk-pixbuf-gnome-dev, libperl-dev, libgnome-dev, libzvt-dev, python2-dev dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. dpkg-buildpackage: (Use -d flag to override.) Build command 'cd xchat-1.8.2 && dpkg-buildpackage -b -uc' failed. E: Child process failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
airport / pcmcia ?
Hi ! Has anybody Airport ? I want to buy Airport but don´t know if the support is good. Does Linux support all airport features ? Do I need MacOS for Airport, because I´m about to kick it soon (need more space for GNU/Linux :-)) ) Are there special tools for airport ? My hardware is Pismo 400Mhz ... Debian GNU/Linux sid Is there any known problem with airport and GNU/Linux ? And my last question, because I heard and read that i need pcmcia, which modules do i need to get the pcmcia slot to work ( evtl for gsm card !? don´t know, yet) ? Have 2.4.8-pre3-benh ... newer benh doesn´t compile without smp ... don´t know why ... Is Airport a security problem ? how good is encryption and can i configure a password ? Thanks a lot for your answeres, Michael
Re: airport / pcmcia ?
EMail from Steven Hanley <[EMAIL PROTECTED]> to DebianPPC with message <[EMAIL PROTECTED]> On Tue, 21 Aug 2001 00:33:50 +1000 Steven Hanley wrote: > On Mon, Aug 20, 2001 at 04:14:50PM +0200, Michael Flaig wrote: > > Hi ! > > > > Has anybody Airport ? > > card or access point? both ... or is there a better access point and card ? > > I have the card, works fine at home in ibss mode with a d-link card in an x86 what do you mean with ibss ? > box, at work we have an aironet access point and an apple airport base > station, both of which also work fine with the airport card in my laptop. cool :-) > > > I want to buy Airport but don_t know if the support is good. Does Linux > > support all airport features ? > > Do I need MacOS for Airport, because I_m about to kick it soon (need more > > space for GNU/Linux :-)) ) > > Are there special tools for airport ? > > no need for macos, the card is fully supported in linux (well you may need > macos to update the firmware on the card, I have not worked that one out in > linux yet) as for airport base station support, there is a neat java client > for that iin which you can do any airtport base station configuration, > including updating the base station firmware. so no need for macos to interact > with the base stations either :) so I should first update the firmware and then delete macos ... :-) > > > > My hardware is Pismo 400Mhz ... Debian GNU/Linux sid > > > > Is there any known problem with airport and GNU/Linux ? > > from time to time the driver may have issues, but generally they get fixed > fast and it works again. so no problems > > > > And my last question, because I heard and read that i need pcmcia, which > > modules do i need to get the pcmcia slot to work ( evtl for gsm card !? > > don_t know, yet) ? > > you dont need pcmcia installed or anything, the airport card is not a pcmcia > card and is initialised seperately to pcmcia services. just modprobe airport > should work. > > > Have 2.4.8-pre3-benh ... newer benh doesn_t compile without smp ... don_t > > know why ... > > well someone else on this list has had a problem with the most recent benh > kernel and airport, I have 2.4.6 benh working perfectly with it. > > > Is Airport a security problem ? how good is encryption and can i configure a > password ? > > WEP is a joke, do not use WEP for encryption, either just use no encryption at > all or set up proper point to point encrypted tunnels (VPN), I use CIPE for > this purpose which is incredibly easy to set up on linux and works pretty much > flawlessly. Well ... no encryption is bad :-( Everyone with a laptop in front of my door could sniff my network, or isn´t it so easy ? so you build vpn between you and ?! access point or gateway route !? how does this work ... i thought vpn is point to point so you have to build a tunnel to the other point you want to connect !? or is it possible to tunnel only the short path from card to access point or router ? thanks, michael > > See You > Steve > > -- > [EMAIL PROTECTED] http://wibble.net/~sjh > Look Up In The Sky > Is it a bird? No > Is it a planeNo > Is it a small blue banana? > Yes > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: airport / pcmcia ?
EMail from Michel Dänzer <[EMAIL PROTECTED]> to Derrik Pates <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Mon, 20 Aug 2001 17:41:20 +0200 Michel Dänzer wrote: > > > Derrik Pates wrote: > > On Mon, 20 Aug 2001, Michel Dänzer wrote: > > > > > >>>He said he has a Pismo - I don't think the Pismo has the Airport slot in > >>>it, > >>> > >>Yes it has, at least mine has. > >> > > > > Really? > > Yep, no kidding. :) funny :-) OK but where is the slot hidden ? under the keyboard, but where? > > > I didn't think Apple had any plans for any wireless support until > > after the original iMacs and the G3 tower systems, which I thought > > excluded all the G3 PowerBooks. I'll have to remember that. > > You have to be aware that the Pismo is a pretty different beast from all > other > G3 PowerBooks, even though it looks similar to some. beast :-) nice *ggg* cu, michael > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
changed to "keyboard_sends_linux_keycodes"
Hi all... Have a problem. I changed from macintosh to linux keycodes. My Problem now is "at" "pipe" etc. I´m using qwertz german nodeadkeys in console and X11 . Same problem. How can I fix this ? Is the keymap in console-data 0.7.7 broken ? this is a big problem because i can´t work with the machine without "at" and "pipe". I think it´s a problem with the Alt Key. Alt is now Alt but the 3rd modify of the < key doesn´t work. Same to Q and others. And the _old_ Alt was the Apple Key between Alt and Spacebar. Thanks for you help. Greets, Michael
Re: changed to "keyboard_sends_linux_keycodes"
EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Sun, 26 Aug 2001 22:03:08 +0200 Michel Dänzer wrote: > Michael Flaig wrote: > > > Have a problem. I changed from macintosh to linux keycodes. My Problem now > > is "at" "pipe" etc. I´m using qwertz german nodeadkeys in console and X11 . > > Same problem. > > > > How can I fix this ? Is the keymap in console-data 0.7.7 broken ? > > > > this is a big problem because i can´t work with the machine without "at" and > > "pipe". I think it´s a problem with the Alt Key. > > > > Alt is now Alt but the 3rd modify of the < key doesn´t work. Same to Q and > > others. And the _old_ Alt was the Apple Key between Alt and Spacebar. > > Are you using the Apple USB variant? no ... i´m working on pismo with the standard keymap german latin1-nodeadkeys ... not usb variant ... > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member
Re: changed to "keyboard_sends_linux_keycodes"
EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Sun, 26 Aug 2001 22:03:08 +0200 Michel Dänzer wrote: > Michael Flaig wrote: > > > Have a problem. I changed from macintosh to linux keycodes. My Problem now > > is "at" "pipe" etc. I´m using qwertz german nodeadkeys in console and X11 . > > Same problem. > > > > How can I fix this ? Is the keymap in console-data 0.7.7 broken ? > > > > this is a big problem because i can´t work with the machine without "at" and > > "pipe". I think it´s a problem with the Alt Key. > > > > Alt is now Alt but the 3rd modify of the < key doesn´t work. Same to Q and > > others. And the _old_ Alt was the Apple Key between Alt and Spacebar. > > Are you using the Apple USB variant? No but I have tested with USB variant ... same bad keymap ?! :-( I´m using 2.4.9-ben0 at the moment ... > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member
Macserial 2.4.9-benh broken ?
Hi ! My Machine is Powerbook G3 Pismo 2000 I can´t configure wvdial sind 2 - 3 month. Wvdial can´t find the modem ... PowerMac Z8530 serial driver version 2.0 tty00 at 0xc98ea020 (irq = 22) is a Z8530 ESCC (cobalt modem) tty01 at 0xc98f1000 (irq = 23) is a Z8530 ESCC (IrDA) if i do wvdialconf with 2.4.9-benh0 : saratoga:/home/mfl# wvdialconf wvdialconf: error while loading shared libraries: wvdialconf: undefined symbol: __dso_handle saratoga:/home/mfl# What´s wrong with this ? With 2.4.8 wvdialconf probed the serial devices but found nothing ... with 2.4.9 wvdial can´t probe ... did i something wrong at configuring and compiling ? rsync is 1 day old ... cya, michael
Re: changed to "keyboard_sends_linux_keycodes"
Hi again ... I changed to de-usb-latin1-nodeadkeys. if i want the "at" then alt and l is right ... also alt and < for pipe ... but for changing the desktop the apple key is used !? ... strange ... but my X11 is also broken ... perhaps you can help me with this, too. Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant""nodeadkeys" Option "XkbOptions""ctrl:nocaps" is this correct ? do you know where the keymap problem is discussed ? debian-devel? thanks, michael EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Sun, 26 Aug 2001 22:25:12 +0200 Michel Dänzer wrote: > Michael Flaig wrote: > > > > EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL > > PROTECTED]> with message <[EMAIL PROTECTED]> > > On Sun, 26 Aug 2001 22:03:08 +0200 Michel Dänzer wrote: > > > > > Michael Flaig wrote: > > > > > > > Have a problem. I changed from macintosh to linux keycodes. My Problem > > > > now is "at" "pipe" etc. I´m using qwertz german nodeadkeys in console > > > > and X11 . Same problem. > > > > > > > > How can I fix this ? Is the keymap in console-data 0.7.7 broken ? > > > > > > > > this is a big problem because i can´t work with the machine without "at" > > > > and "pipe". I think it´s a problem with the Alt Key. > > > > > > > > Alt is now Alt but the 3rd modify of the < key doesn´t work. Same to Q > > > > and others. And the _old_ Alt was the Apple Key between Alt and > > > > Spacebar. > > > > > > Are you using the Apple USB variant? > > > > No but I have tested with USB variant ... same bad keymap ?! :-( > > At least 'alt' should be on the Apple key again. I've quickly tested it, I got > @ with option-L . > > I thought the Apple USB keymaps were basically the same as the ADB macintosh > keymaps; maybe I was wrong. > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Fw: Re: changed to "keyboard_sends_linux_keycodes"
sorry ... this should go here, too ... EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Sun, 26 Aug 2001 22:25:12 +0200 Michel Dänzer wrote: > Michael Flaig wrote: > > > > EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL > > PROTECTED]> with message <[EMAIL PROTECTED]> > > On Sun, 26 Aug 2001 22:03:08 +0200 Michel Dänzer wrote: > > > > > Michael Flaig wrote: > > > > > > > Have a problem. I changed from macintosh to linux keycodes. My Problem > > > > now is "at" "pipe" etc. I´m using qwertz german nodeadkeys in console > > > > and X11 . Same problem. > > > > > > > > How can I fix this ? Is the keymap in console-data 0.7.7 broken ? > > > > > > > > this is a big problem because i can´t work with the machine without "at" > > > > and "pipe". I think it´s a problem with the Alt Key. > > > > > > > > Alt is now Alt but the 3rd modify of the < key doesn´t work. Same to Q > > > > and others. And the _old_ Alt was the Apple Key between Alt and > > > > Spacebar. > > > > > > Are you using the Apple USB variant? > > > > No but I have tested with USB variant ... same bad keymap ?! :-( > > At least 'alt' should be on the Apple key again. I've quickly tested it, I got > @ with option-L . i thougt with keymap_sends_linux_keycodes the keymap problem would be solved ... because the map isn´t different to x86 then !? ... why is the macintosh keyboard such a problem ? x86 works but ppc doesn´t ... why? Don´t know much about keymaps but can I help making one ? Console keymap isn´t the problem ... It´s only one file but X11 is also broken. And I know nothing about xkb ... > > I thought the Apple USB keymaps were basically the same as the ADB macintosh > keymaps; maybe I was wrong. > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: changed to "keyboard_sends_linux_keycodes"
EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Mon, 27 Aug 2001 00:50:10 +0200 Michel Dänzer wrote: > Michael Flaig wrote: > > > I changed to de-usb-latin1-nodeadkeys. > > Not mac-usb-de-latin1-nodeadkeys ? > > > if i want the "at" then alt and l is right ... also alt and < for pipe ... > > > > but for changing the desktop the apple key is used !? ... strange ... > > I thought you wanted that... It´s OK :-) I only surprised because every keymap i used in the last 12 Month is other to the one before *G* > > > > but my X11 is also broken ... perhaps you can help me with this, too. > > > > Section "InputDevice" > > Identifier "Generic Keyboard" > > Driver "keyboard" > > Option "CoreKeyboard" > > Option "XkbRules" "xfree86" > > Option "XkbModel" "pc105" >^ > Change this to "macintosh". after changing the Model to macintosh and restarting X11 ... the keymap is the same as before. Nothing changed !? Xkb is Enabled. > > > Option "XkbLayout" "de" > > Option "XkbVariant""nodeadkeys" > > Option "XkbOptions""ctrl:nocaps" > > > > is this correct ? > > > > do you know where the keymap problem is discussed ? debian-devel? > > What problem? > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: changed to "keyboard_sends_linux_keycodes"
EMail from Michael Flaig <[EMAIL PROTECTED]> to DebianPPC with message <[EMAIL PROTECTED]> On Mon, 27 Aug 2001 07:13:01 +0200 Michael Flaig wrote: > EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL > PROTECTED]> with message <[EMAIL PROTECTED]> > On Mon, 27 Aug 2001 00:50:10 +0200 Michel Dänzer wrote: > > > Michael Flaig wrote: > > > > > I changed to de-usb-latin1-nodeadkeys. > > > > Not mac-usb-de-latin1-nodeadkeys ? > > > > > if i want the "at" then alt and l is right ... also alt and < for pipe ... > > > > > > but for changing the desktop the apple key is used !? ... strange ... > > > > I thought you wanted that... > > It´s OK :-) > > I only surprised because every keymap i used in the last 12 Month is other to > the one before *G* Sorry for this bad grammar ... It´s too early in the morning ... > > > > > > > > but my X11 is also broken ... perhaps you can help me with this, too. > > > > > > Section "InputDevice" > > > Identifier "Generic Keyboard" > > > Driver "keyboard" > > > Option "CoreKeyboard" > > > Option "XkbRules" "xfree86" > > > Option "XkbModel" "pc105" > >^ > > Change this to "macintosh". > > after changing the Model to macintosh and restarting X11 ... the keymap is > the same as before. Nothing changed !? > Xkb is Enabled. > > > > > > Option "XkbLayout" "de" > > > Option "XkbVariant""nodeadkeys" > > > Option "XkbOptions""ctrl:nocaps" > > > > > > is this correct ? > > > > > > do you know where the keymap problem is discussed ? debian-devel? > > > > What problem? > > > > > > -- > > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) > > developer > > CS student, Free Software enthusiast \XFree86 and DRI project > > member > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: German Keymap for XFree on sid
EMail from Ethan Benson <[EMAIL PROTECTED]> to debian-powerpc@lists.debian.org with message <[EMAIL PROTECTED]> On Sun, 26 Aug 2001 15:28:22 -0800 Ethan Benson wrote: > On Mon, Aug 27, 2001 at 12:45:55AM +0200, Michel Dänzer wrote: > > Falk Stern wrote: > > > > > Ok. I did it. Two days from now, I did an "apt-get dist-upgrade", switched > > > to the new-style linux keycodes. On the console, everything works fine, > > > after using the "Apple USB" keymap on my iBook2. > > > > > > Has anyone a hint how to get crucial things like the "pipe" or an "at" on > > > XFree? (or a working german keymap) > > > > Option "XkbRules" "xfree86" > > Option "XkbModel" "macintosh" > > Option "XkbLayout" "de" > > > > dpkg-reconfigure -plow xserver-xfree86 and selecting XkbModel macintosh > > might > > be enough. > > > note that this configuration requires XFree 4.1. 4.0.3 won't do. OK I have the same problem ... Made some tests. The AltGr Key (x86) is called Meta right ? Apple Key = Meta ... If I call the Right Alt to be Meta : Option "RightAlt" "Meta" Then the Right Alt does the same shit as Apple Key does. I can press Apple + Q which should be "at" I can press Apple + < which should be "pipe" But it doesn´t work, also with RightAlt and Q / < what´s wrong with this ? Anyone some ideas ? thanks, Michael > -- > Ethan Benson > http://www.alaska.net/~erbenson/ >
Re: German Keymap for XFree on sid
EMail from Michel Dänzer <[EMAIL PROTECTED]> to Falk Stern <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Mon, 27 Aug 2001 21:24:17 +0200 Michel Dänzer wrote: > Falk Stern wrote: > > > > On Mon, 27 Aug 2001, Michel [ISO-8859-1] Dänzer wrote: > > > > > Has anyone a hint how to get crucial things like the "pipe" or an "at" > > > on XFree? (or a working german keymap) > > > > > > >>> Option "XkbRules" "xfree86" > > > >>> Option "XkbModel" "macintosh" > > > >>> Option "XkbLayout" "de" > > > > > > > > Didn't work. > > > > > > > > > > > >>>dpkg-reconfigure -plow xserver-xfree86 and selecting XkbModel macintosh > > > >>>might be enough. > > > >>> > > > > > > > > Sorry, no. Didn't work either. > > > > > > How does it fail? Are you really using Linux keycodes? > > > > The "Apple/Clover/whatsoever" key shows up as "Meta_L" using "xev".. > > What would you want it to be? "Alt_L"? Have you tried the key labelled > alt/option? Hi Michel, The Problem is that Alt_L isnt doing what it should do. When I hold down Alt_L or the Alt / Option Key and press Q then q is printed out and not "at" > > If the map doesn't suit you, use xmodmap(1x). dont know how to fix this problem ... do you ? thanks, michael > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: Fw: praeda
wenn ich das wüsste würde es nicht abkacken. das teil läuft noch schreibt aber keine auth files mehr ... EMail from Björn Buchwald <[EMAIL PROTECTED]> to "Michael Flaig" <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Mon, 27 Aug 2001 22:04:13 +0200 Björn Buchwald wrote: > und warum kackt das ding ab ??? > > > > kann sowas öfter vorkommen ??? > > sollte eigentlich nicht ... > > ich lass mir da was einfallen, das das checkt ... > allerdings wird der eh jeden tag neu gestartet, nachdem der cache geleert > wurde. > > cu, > > mfl > > > > > > - Original Message - > > From: "Michael Flaig" <[EMAIL PROTECTED]> > > To: "Björn Buchwald" <[EMAIL PROTECTED]> > > Sent: Monday, August 27, 2001 9:01 PM > > Subject: Re: Fw: praeda > > > > > > hm ... scheinbar hat der smtpapop dienst sich weggehangen ... mist ... > > > > er solls nochmal probieren ... jetzt muss es gehen. > > > > cu, > > > > mueffel > > > > > >
Re: Fw: praeda
EMail from Michael Schmitz <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Mon, 27 Aug 2001 23:16:35 +0200 (CEST) Michael Schmitz wrote: > On Mon, 27 Aug 2001, Michael Flaig wrote: > > Wrong list, eh? > > Michael > d´ow ... wrong list ... yes .. sorry ... cu, michael
Re: searching for xine testers
I couldn´t build xine because of some errors with libwine !? ... would be great if there are packages soon :-) EMail from Michel Dänzer <[EMAIL PROTECTED]> to Siggi Langauf <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Tue, 28 Aug 2001 02:37:47 +0200 Michel Dänzer wrote: > Siggi Langauf wrote: > > > So if you just get it running: fine! Nice if you'd send me a note. > > Built them on powerpc without a hitch, and they basically work. :) > > > > If there are any severe showstoppers: hmmm, notify me, or maybe even > > <[EMAIL PROTECTED]>, so we can find a solution. > > One thing is that it seems to hang when it can't initialize sound. > > > Also, I was excited at first to see that it has an ffmpeg plugin, but I > couldn't play MJPEG nor DivX files, is that to be expected? > > > Haven't tried DVD playback. > > > All in all, I guess I can upload the packages? > > > -- > Earthling Michel Dänzer (MrCooper)\ Debian GNU/Linux (powerpc) developer > CS student, Free Software enthusiast \XFree86 and DRI project member > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: searching for xine testers
Yes, found them some after sending the mail *g*, but last week there were no xine package. But how can I get divx to work with xine ? have compiled libcss and divxdecore ... cu, Michael EMail from Michel Dänzer <[EMAIL PROTECTED]> to Michael Flaig <[EMAIL PROTECTED]> with message <[EMAIL PROTECTED]> On Tue, 28 Aug 2001 11:24:47 +0200 Michel Dänzer wrote: > Michael Flaig wrote: > > > > I couldn´t build xine because of some errors with libwine !? ... > > > > would be great if there are packages soon :-) > > There are 0.4.3 packages in sid. > > > -- > Michel Dänzer | Iogram AG | http://iogram.ch > Laupenstrasse 1 | 3008 Bern | +41 (0)1 465 45 45 > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
Re: XFree86 running too slow in Performa 6500/300.
Hi Miguel, the Problem is for sure the installed memory. I would upgrade to at least 512 megs of ram to be able to use gnome in a proper way. I´m a friend of gnome but have you considered using something lighter till you have more ram available? like xfce or even better an window manager instead of a complete desktop environment. With 32megs of ram I think fluxbox would be best. Your machine must be swapping like hell. you could try swapping on an flash memory like an usb stick (does this machine have usb 2.0?). Don´t know exactly how long an usb stick will make it when tortured this way (used as a swap device). Read/Write cycles are limited on flash devices. Hope that helps, Michael - Ursprüngliche Nachricht - Von: Miguel Da Silva - Servicio de Informática <[EMAIL PROTECTED]> An: debian-powerpc@lists.debian.org Gesendet: Donnerstag, 31. August 2006 17.46 Uhr GMT+0100 Betreff: XFree86 running too slow in Performa 6500/300. Ladies and gentllemen, I could finally install Sarge in a Performa 6500/300 and everything goes fine but XFree86 is running too slow. The CPU is a 603ev and the RAM memory is 32MB (I think that's why it runs too slow). I've recently installed Gnome and had to wait about 2 minutes (believe me) until I could run any program. Any hint of how improve the machine's perfomance? Greetings. -- Miguel Da Silva. Servicio de Informatica. Facultad de Ciencias. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: XFree86 running too slow in Performa 6500/300.
Hi, sad thing :-( Have you considered running the apps on a more powerful server? using xdmcp or probably freenx? ... as a thin client (probably diskless with netboot) Best, Michael - Ursprüngliche Nachricht - Von: Miguel Da Silva - Servicio de Informática <[EMAIL PROTECTED]> An: debian-powerpc@lists.debian.org Cc: debian-powerpc@lists.debian.org Gesendet: Donnerstag, 31. August 2006 18.17 Uhr GMT+0100 Betreff: Re: XFree86 running too slow in Performa 6500/300. Hi, the problem is that theses computer (8 in total, same processor, disk capacity, etc, etc) are quite forgotten and the faculty directors won't put a cent on it... Once they were good machines, but know any Pentium-whatever is doing a better job :( Thankl you anyway... -- Miguel Da Silva. Servicio de Informatica. Facultad de Ciencias. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ATI and Cinema 30" ... dual link seems not to work
Hi, does anyone got a 30" Cinema Display to work with an ATI Card? I know this might be the wrong list, because my System is Intel based, but it is an Apple MacPro with the ATI X1900. Tried with etch and fglrx but had no success so far. Option ForceMonitors "tmds2i" should enable dual link support, but it seems not to work. Xorg seems to be running.but the Cinema Display is flashing the led 3 times... Does anyone at least know what this means? Oh and btw. the Cinema Display is working in 1280x80 resolution and without the ForceMonitors Option. Thanks in advance. Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: ATI and Cinema 30" ... dual link seems not to work
Hi, I'll just answere myself ... for others to find this :) Am Freitag, den 29.12.2006, 05:50 +0100 schrieb Michael Flaig: > Hi, > > does anyone got a 30" Cinema Display to work with an ATI Card? Well ... still doesn't work properly but getting closer. > Option ForceMonitors "tmds2i" should enable dual link support, but it > seems not to work. The Option does active dual head. Just the timings are (still) incorrect. I got a picture, but with a lot of artifacts with a new modeline calculated for 2560x1600 at exactly 60Hz. So this is odd. > Xorg seems to be running.but the Cinema Display is flashing the led 3 > times... Does anyone at least know what this means? It means "out of scan range" afaik now ... Documentation on my progress can be found here: https://secure.netzblock.org/helpdesk/macpro/wiki/CinemaDisplayDocumentation Anyone got a clue where Apple documented correct timing for the cinema? Or does anyone know how to extract this information, maybe from running macosx? Thanks and good night! Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Debian
Hello! I´ve got Problems booting Debian PPC in my new Powerbook G3 400 ... The CD´s don't boot ... ... any ideas why ? the cd are ok ... i think ... i can read the data on it ... -- Michael Flaig ... PROLinux
HELP! Killed Powerbook!
Hello! I wanted to install Debian on my new Powerbook. Wasn´t a good idea. Nothing booted ... ... not debian ... not macOS The 4 Apple Partitions were there. I re-inizialized the partition map and then the macos rescue can´t find the harddisk any more. What can I do to get this Partitions Back? I resized the partiton map i think. It was over 500 GB ... Now i´ve the normal size back but the lenth and base of the partitons are gone ... can I restore this data ? how ? Thanks a lot ! Greets, Michael -- Michael Flaig ... PROLinux
Re: X Window on Powerbook G3
Hi! You´ll find the config file under /etc/X11/XF86Config On my Powerbook "Firewire Edition" 400 - X was ready to go ... i think you need the same server for you PB. It´s xserver-fbdev greets, mfl On Tue, Nov 07, 2000 at 05:04:22PM +0100, Tobias Mohr - WestSurf wrote: > Hi, > > Every time I start my X Window system (startx) ... my Powerbook G3 - 333 (ATI > 3D Rage LT Pro) show me an ugly monitor. I can't recognize anything. > > I can't find the xf86config in my debian distribution (2.2 - Joel 'Espy' > Klecker" Release) > I have installed nearly all xserver-packages with dselect (xbase-clients, > xfonts-100dp, xfonts-75dpi, xfonts-base, xserver-common, xserver-fbdev, > tcl8.0, tk8.0, xlib6g) > > How can I configure my X Windows with debian on my Powerbook? > > thanx Tobias -- Michael Flaig ... PROLinux
yaboot: Booting MacOS doesnt work
Hello! My Hardware is an Pismo 400 Modell Firewire ... I´ve problems booting macOS. It´s installed on /dev/hda10. My yaboot Bootstrap Partition is /dev/hda9 . I can boot Debian but when i press m only the floppy with the blinking questionmark appears. I´ve reinstalled MacOS with the restore cd to the Macintosh HD (partition 10) Any ideas, why i can´t boot up MacOS I´ll send you my Configs - /etc/yaboot.conf - /etc/ofboot.b Thanks... cu, mfl PS. Why I´ve got partiton 9 the first real partition ? no idea!? i´ve got 7 apple partitons and 1 partition table. strange ... -- Michael Flaig ... PROLinux ## Example yaboot.conf for ybin and yaboot >= 0.6 ## see man yaboot.conf for more details. ## This example shows how to multi boot GNU/Linux, MacOS, MacOSX, and ## Darwin with SCSI disks. This example also creates menu items for ## booting from the CDROM, the Network and into an OpenFirmware ## prompt. ## Change to your bootstrap partition ie: /dev/sda2 boot=/dev/hda9 device=hd: delay=10 timeout=50 install=/usr/lib/yaboot/yaboot magicboot=/usr/lib/yaboot/ofboot image=/vmlinux label=Linux root=/dev/hda11 partition=11 read-only #image=/vmlinux.old # label=Linux.old # root=/dev/sda11 # read-only ## The macos and macosx variables can be either a unix /dev node or an ## OpenFirmware path: macos=/dev/hda10 ## Add a menu entry to boot from the CDROM: enablecdboot ## Add a menu entry to boot from the Network: enablenetboot ## Add a menu entry to boot into an OpenFirmware prompt: enableofboot iMac,1 PowerMac1,1 PowerMac2,1 PowerMac2,2 PowerMac3,1 PowerMac3,2 PowerMac3,3 PowerMac5,1 PowerBook1,1 PowerBook2,1 PowerBook2,2 PowerBook3,1 PowerBook3,2 Powerbook G3 - PowerPC 400 Mhz - 128 MB Ram ... Loading GNU/Linux Bootmanager " get-key-map" " keyboard" open-dev $call-method dup 20 dump 5 + c@ 08 = if " Booting MacOS ..." cr " boot hd:10,\\:tbxi" eval else " Booting Yaboot ..." cr " boot hd:9,yaboot" eval then 1010 F8FEACF6 00F5FEFEF500 002BFAFEFAFCF700 00F65D5857812B00 00F5350B2F885600 00F6335708F8FE00 005600F600F5FD81 F9F800F5FAFFF800 8100F5F5F6FEFE00 00F8F700F500F5FCFFF7 0088F7F5F5FCFF2B 002F582A00F508ADE02C 00090B0A35A62B002D3B350A 000A0A0B0B3BF6505E0B0A0B0A00 002E350B0B2F87FAFCF45F0B2E09 0007335FF82BF72B57590700 AC81 00818100 00FBAC00 0081DFDFDB00 0081DD5F83FFFD00 0081DDDF5EACFF00 00FDF981F981 FFACF9F9F981AC00 FFF98181F9F98100 00ACACF981F981F9F9AC 00FFACF9F981F9F981FB 0083DFFBF981F9F95EFC 005F5F5FDDFFFBF9F9F9835F 005F5F5F5FDD81F9F9E7DF5F5F5F5F00 0083DD5F5F83DF5F835F 00FBDDDFACFBACFBDFDFFB00 0000 0000 0000 0000 0000 00FF FF00 FF00 00FF 00FF 00FF 00FF 0000 00FF 0000
build german Keymap ...
Hi again ...
I´ve build an German Keymap for my Pismo 400.
It is only for the Pismo. (i´ve only testes on an pismo)
i´ll send it to you ...
... perhaps someone needs it ...
Greets,
mfl
--
Michael Flaig ... PROLinux
#
# Deutsche Tastatur - Powerbook G3
# abgeleitet von mac-de2-ext.map und angepasst auf das Powerbook (eventuell
auch auf iBook lauffähig)
#
# November 2000, Michael Flaig <[EMAIL PROTECTED]>
#
# Sonderzeichen, die es auf der Tastatur nicht gibt, habe ich so angeordnet:
#
# @ : AltGr + q
# | : AltGr + <
# ~ : AltGr + +
# \ : AltGr + ß
# { : AltGr + 7
# } : AltGr + 0
# [ : AltGr + 8
# ] : AltGr + 9
# Page up : fn+cursor hoch
# Page down : fn+cursor runter
# Remove (Del) : Taste recht neben der Leertaste
# Alt : Apple Taste
# AltGr : die 2 Alt Tasten
#
# Ich habe viele der "Control_" und "Meta_" Einstellungen einfach so gelassen,
# wie sie waren, einfach weil ich nichts so recht damit anfangen kann. :)
# Wer mir in der Beziehung auf die Sprünge helfen möchte, bitte mailen.
#
keymaps 0-2,4-5,8,12
strings as usual
compose as usual for "iso-8859-1"
keycode 1 = s
keycode 2 = +d+DHex_DControl_d
Control_dMeta_d Meta_Control_d
keycode 3 = +f+FHex_FControl_f
Control_fMeta_f Meta_Control_f
keycode 4 = h
keycode 5 = g
keycode 6 = y
keycode 7 = x
keycode 8 = +c+CHex_CControl_c
Control_cMeta_c Meta_Control_c
keycode 9 = v
keycode 10 = dead_circumflex degree
keycode 11 = +b+BHex_BControl_b
Control_bMeta_b Meta_Control_b
keycode 12 = +q+Qat
keycode 13 = w
keycode 14 = +e+EHex_EControl_e
Control_eMeta_e Meta_Control_e
keycode 15 = r
keycode 16 = z
keycode 17 = t
keycode 18 = one exclam
alt keycode 18 = Meta_one
keycode 19 = two quotedbl nul nul
nul Meta_two
keycode 20 = threesection
control keycode 20 = Escape
alt keycode 20 = Meta_three
keycode 21 = fourdollarnul
Control_backslash
alt keycode 21 = Meta_four
keycode 22 = six ampersand
control keycode 22 = Control_asciicircum
alt keycode 22 = Meta_six
keycode 23 = five percent
control keycode 23 = Control_bracketright
alt keycode 23 = Meta_five
keycode 24 = dead_acute dead_grave
alt keycode 24 = Meta_equal
keycode 25 = nine parenright bracketright
alt keycode 25 = Meta_nine
keycode 26 = sevenslashbraceleft
Control_underscore
alt keycode 26 = Meta_seven
keycode 27 = ssharp question backslash
Control_underscore Control_underscore Meta_minus
keycode 28 = eightparenleftbracketleft Delete
alt keycode 28 = Meta_eight
keycode 29 = zero equalbraceright
alt keycode 29 = Meta_zero
keycode 30 = plus asterisk asciitilde
Control_bracketright
alt keycode 30 = Meta_bracketright
keycode 31 = o
keycode 32 = u
keycode 33 = +udiaeresis +Udiaeresis
control keycode 33 = Escape
alt keycode 33 = Meta_bracketleft
keycode 34 = i
keycode 35 = p
keycode 36 = Return
alt keycode 36 = Meta_Control_m
keycode 37 = l
keycode 38 = j
keycode 39 = +adiaeresis +Adiaeresis
control keycode 39 = Control_g
alt keycode 39 = Meta_apostrophe
keycode 40 = k
keycode 41 = +odiaeresis +Odiaeresis
alt keycode 41 = Meta_semicolon
keycode 42 = numbersign apostrophe
control keycode 42 = Control_backslash
alt keycode 42 = Meta_backslash
keycode 43 = commasemicolon
alt keycode 43 = Meta_comma
keycode 44 = minusunderscore
control keycode 44 = Delete
alt keycode 44 = Meta_slash
keycode 45 = n
keycode 46 = m
keycode 47 = period colon
control keycode 47 = Compose
alt keycode 47 = backslash
Re: build german Keymap ...
On Tue, Nov 14, 2000 at 12:11:12PM +0100, Gerhard Reuteler wrote:
> Hallo,
> I have the same problem: I would like to install my swiss german keyboard on
> the pismo, something like mac-sg-latin1, which doesn't seem to exist
> anywhere on the net. I'm interested to hear what you did
Hi!
I made a German Keymap for the Konsole myself because there aren´t any usable
ones.
i´ll send you the keymap with ths mail. Perhaps you need to put gzipped into
/usr/share/keymaps/mac/
then choose the keymap with kbdconfig or load temporatily with loadkeys.
It´s easy to create a konsole map, if you go to console 2 and do showkeys.
Greets,
mfl
>
> -Ursprüngliche Nachricht-
> Von: Michael Flaig [mailto:[EMAIL PROTECTED]
> Gesendet: Dienstag, 7. November 2000 19:43
> An: debian-powerpc@lists.debian.org
> Betreff: build german Keymap ...
>
>
> Hi again ...
>
> I´ve build an German Keymap for my Pismo 400.
> It is only for the Pismo. (i´ve only testes on an pismo)
>
> i´ll send it to you ...
>
> ... perhaps someone needs it ...
>
> Greets,
>
> mfl
>
> --
> Michael Flaig ... PROLinux
>
--
Michael Flaig ... PROLinux
#
# Deutsche Tastatur - Powerbook G3
# abgeleitet von mac-de2-ext.map und angepasst auf das Powerbook (eventuell
auch auf iBook lauffähig)
#
# November 2000, Michael Flaig <[EMAIL PROTECTED]>
#
# Sonderzeichen, die es auf der Tastatur nicht gibt, habe ich so angeordnet:
#
# @ : AltGr + q
# | : AltGr + <
# ~ : AltGr + +
# \ : AltGr + ß
# { : AltGr + 7
# } : AltGr + 0
# [ : AltGr + 8
# ] : AltGr + 9
# Page up : fn+cursor hoch
# Page down : fn+cursor runter
# Remove (Del) : Taste recht neben der Leertaste
# Alt : Apple Taste
# AltGr : die 2 Alt Tasten
#
# Ich habe viele der "Control_" und "Meta_" Einstellungen einfach so gelassen,
# wie sie waren, einfach weil ich nichts so recht damit anfangen kann. :)
# Wer mir in der Beziehung auf die Sprünge helfen möchte, bitte mailen.
#
keymaps 0-2,4-5,8,12
strings as usual
compose as usual for "iso-8859-1"
keycode 1 = s
keycode 2 = +d+DHex_DControl_d
Control_dMeta_d Meta_Control_d
keycode 3 = +f+FHex_FControl_f
Control_fMeta_f Meta_Control_f
keycode 4 = h
keycode 5 = g
keycode 6 = y
keycode 7 = x
keycode 8 = +c+CHex_CControl_c
Control_cMeta_c Meta_Control_c
keycode 9 = v
keycode 10 = dead_circumflex degree
keycode 11 = +b+BHex_BControl_b
Control_bMeta_b Meta_Control_b
keycode 12 = +q+Qat
keycode 13 = w
keycode 14 = +e+EHex_EControl_e
Control_eMeta_e Meta_Control_e
keycode 15 = r
keycode 16 = z
keycode 17 = t
keycode 18 = one exclam
alt keycode 18 = Meta_one
keycode 19 = two quotedbl nul nul
nul Meta_two
keycode 20 = threesection
control keycode 20 = Escape
alt keycode 20 = Meta_three
keycode 21 = fourdollarnul
Control_backslash
alt keycode 21 = Meta_four
keycode 22 = six ampersand
control keycode 22 = Control_asciicircum
alt keycode 22 = Meta_six
keycode 23 = five percent
control keycode 23 = Control_bracketright
alt keycode 23 = Meta_five
keycode 24 = dead_acute dead_grave
alt keycode 24 = Meta_equal
keycode 25 = nine parenright bracketright
alt keycode 25 = Meta_nine
keycode 26 = sevenslashbraceleft
Control_underscore
alt keycode 26 = Meta_seven
keycode 27 = ssharp question backslash
Control_underscore Control_underscore Meta_minus
keycode 28 = eightparenleftbracketleft Delete
alt keycode 28 = Meta_eight
keycode 29 = zero equalbraceright
alt keycode 29 = Meta_zero
keycode 30 = plus asterisk asciitilde
Control_bracketright
alt keycode 30 = Meta_bracketright
keycode 31 = o
keycode 32 = u
keycode 33 = +udiaeresis +Udiaeresis
control keycode 33 = Escape
alt keycode 33 = Meta_bracketleft
keycode 34 =
Re: X11 config
Hello! I've got a Problem with my aktual Debian Installation. I want to run 16bit Mode with XFree ... I've set the DefaultColorDepth to 16 but when I do "startx" i'm getting errors from the XFB_Dev Server. fbdevScreenInit: unable to set screen params (Invalid Argument) Could it be a Problem with my yaboot.conf ? I'm booting Linux Debian from a bootstrap partition. I've created it with the LinuxPPC Page, so that I can choose this Partiton as boot device in MacOS. I'll send you my yaboot.conf with this mail. What's about xpmac ? Can I run it under Debian ? Any good Howtos available ? And by the way: What was the reason for leaving xpmac out of debian potato and woody ? I've got woody now ... had the same problem with potatop ... any ideas ? greets, mfl On Thu, Nov 16, 2000 at 07:22:13PM +, Gordon Dykes wrote: > I an having problems configuring X > > On my pc, running suse there was an application called sax to configure X. > > Are there any similar utilities for debian or could somebody send me > the configuration file for an imac (rev B). > > Your time is much appreciated. > -- > For evil to triumph it is only necessary for good men to buy Microsoft. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux init-message = "\nWelcome to DebianPPC...\n\n" timeout = 50 default = Debian image = vmlinux label = Debian novideo image = vmlinux-2.2.17 label = NEU novideo
Re: kdebase broken?
Hello! Are there warnings or error at executing the configure script ? there is a Problem with ld ... the linker ... ... but can't say more ... perhaps wrong qt ? cu, mfl On Sat, Nov 18, 2000 at 07:22:52PM +0100, Fabian Jakobs wrote: > > Hi erverybody, > > I'm using KDE2 on a woody PPC-System (G4). I know that Packages for the > final version of KDE2 exist in the i386-woody tree but for ppc they are > not availible. So I compiled theese packages using "apt-get -b source > kde..." and everything worked fine exept for the kdebase package. I > get the following error messages: > > -- > g++ -O2 -DNDEBUG -fno-exceptions -fno-check-new -Wall -pedantic -W > -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -Wno-long-long > -fno-builtin -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT -DQT_NO_ASCII_CAST -o > libkcm_style.la.closure .libs/libkcm_style_la_closure.o .libs/general.o > .libs/krdb.o .libs/libkcm_style_la_meta_unload.o -L/usr/X11R6/lib > -L/usr/lib /usr/lib/libkfile.so /usr/lib/libksycoca.so /usr/lib/libkio.so > /usr/lib/libkdeui.so -L/usr/lib/gcc-lib/powerpc-linux/2.95.2 > /usr/lib/libkdesu.so /usr/lib/libkdecore.so -ldl /usr/lib/libDCOP.so -lqt > -lpng -ljpeg -lXext -lX11 -lSM -lICE -lutil -lz -lstdc++ -lm -lc > .libs/krdb.o: In function `addFontDef(QString &, char const *, QFont const > &, FontStyle)': > .libs/krdb.o(.text+0x25c): undefined reference to `get_fontset(QString > const &, QString const &)' > .libs/krdb.o: In function `createGtkrc(QFont const &, QColorGroup const > &)': > .libs/krdb.o(.text+0xed8): undefined reference to `get_fontset(QString > const &, QString const &)' > collect2: ld returned 1 exit status > make[5]: *** [libkcm_style.la.closure] Error 1 > make[5]: Leaving directory `/root/kdebase-2.0-final/kcontrol/display' > make[4]: *** [all-recursive] Error 1 > make[4]: Leaving directory `/root/kdebase-2.0-final/kcontrol/display' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory `/root/kdebase-2.0-final/kcontrol' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/root/kdebase-2.0-final' > make[1]: *** [all-recursive-am] Error 2 > make[1]: Leaving directory `/root/kdebase-2.0-final' > make: *** [build-stamp] Error 2 > Build command 'cd kdebase-2.0-final && dpkg-buildpackage -b -uc' failed. > E: Child process failed > --- > > Does anyone have an idea how to compile this package? > > > mfg Fabian > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
XF86Config
Hello! Hours later (after Testing Xpmac) I reinstalled xserver-fbdev (potato package) on woody ... isn't there a woody package ? Which packages do I need to get my Powerbook G3 Pismo (Firewire) with the ATI 128 Rage to work with 16 Bit Colordepth ? After reinstallation startx aborts with: no valid modes found. If I have to use the potato xserver-fbdev could anybody send me a useable XF86Config ? thanks. Good Night ... mfl -- Michael Flaig ... PROLinux
Re: XF86Config
Hi! Thanks! It works. :) I set the config with fbset -x and I had the Option novideo set in yaboot.conf Now I´ve got 16 Bit color ... works fine :-) greets, mfl On Sun, Nov 19, 2000 at 02:33:25PM +0100, Michael Schmitz wrote: > > After reinstallation startx aborts with: no valid modes found. > > Subsection "Display" > Depth 15 > fbbpp 16 > Option "rgb weight" "555" > Modes "1024x768lcd" "800x600lcd" > ViewPort0 0 > Virtual 1024 768 > EndSubsection > > works for me with 4.01 on atyfb - 16 bit depth may not be supported by > aty128fb either though it used to work with 3.x .. Plain fbdev worked for > me using these parameters: > > Section "Screen" > Driver "fbdev" > Device "ATY Mach64" > Monitor "My Monitor" > DefaultColorDepth 32 > Subsection "Display" > Depth 16 > Modes "1024x768lombard" "800x600lombard" > ViewPort0 0 > Virtual 1024 768 > EndSubsection > Subsection "Display" > Depth 32 > Modes "1024x768lombard" "800x600lombard" > ViewPort0 0 > Virtual 1024 768 > EndSubsection > EndSection > > Modes generated using fbset -x. > > Michael > > -- Michael Flaig ... PROLinux
Re: Sound on a PowerMac
Hi! Is sound Hardware installed ? - kernel Module loaded ? - Can you do this: " cat vmlinuz > /dev/dsp " ? Are you in group audio? - in /etc/group: audio:x:29: If everything is configured well you can do this: look if esd is running : "ps ax | grep esd" if not ... Start X and enlightenment. Go to Xterm and start the E Sound Daemon manually with "esd" perhaps you have to restart enlightenment. Hope it´s running now ... cu, mfl On Sun, Nov 19, 2000 at 09:58:46AM -0800, Donnell wrote: > Hi. > > I recently installed GNU/Linux 2.2 on a PowerComputing PowerBase 180. I am > using Enlightenment as the window manager. I can't get any sound. When I > choose "Settings:Audio Settings..." and select "Enable sounds," I encounter > the following error message: > > Error initialising sound > Audio was enabled for Enlightenment but there was an error > communicating with the audio server (Esound). Audio will > now be disabled. > > I didn't see any startup messages in the log pertaining to sound problems. > Where should I begin looking in order to fix this problem? What could be the > cause of it? > > Thanks, > Donnell > > __ > Get to know http://www.quepasa.com > Cool tools, free Internet, new sabor! > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
php4 ... no packages in woody !?
Hi! I´ve upgraded to woody but the php4 packages were purged. Arem´t there woody Packages of PHP4? Are they work in progress? Could I get problems if I install the potato packages ? cu, mfl -- Michael Flaig ... PROLinux
Re: Sound on a PowerMac
On Sun, Nov 19, 2000 at 07:26:18PM -0800, Donnell wrote: > Thanks. The dmasound module was the problem. During installation, I chose > soundcore but not dmasound. The description for dmasound mentioned only the > Amiga and Atari. Hi! Yes the discription schould contain macintosh or apple, too ... I had the same problem with my first installation of debian PPC. Have a nice day ... mfl > > Anyway...thanks again. > > On Sun, 19 November 2000, Michael Flaig wrote: > > Hi! > > > > Ok ... I can only say: No there is not the correct driver loaded. > > If the right driver is chosen you never get /dev/dsp: No such device. > > > > OK. type modconf on the commandline as root. > > goto misc and load dmasound and soundcore. > > > > this works on my Powerbook 400 / Firewire. > > > > Greets, > > > > mfl > > > > > > -- > > Michael Flaig ... PROLinux > > -- > [EMAIL PROTECTED] > __ > Get to know http://www.quepasa.com > Cool tools, free Internet, new sabor! -- Michael Flaig ... PROLinux
Searching for X11-Keymap german ...
Hi! I'm searching for a german X11-keymap that works fine on the Powerbook Firewire. Has anybody a @ with default keymap? I don't understand the X11 keymap concept ... Has anybody working keymaps ? or correct config ? thanks a lot ... cu, mfl -- Michael Flaig ... PROLinux
Re: Searching for X11-Keymap german ...
On Mon, Nov 20, 2000 at 09:25:30PM +, Hadess wrote: > Michael Flaig wrote: > > > > Hi! > > > > I'm searching for a german X11-keymap that works fine on the Powerbook > > Firewire. > > There are 2 things that we would need to know to be able to give you a > proper keymap: > - the version of the kernel, the new input layer appeared in 2.2.17 > (AFAIK) with some guest appearances in the previous ones. > - the version of X, you probably run X4 Ok ok ... I´m running woody ... updated today ... xfree86-common is 4.01 nut the Server is still 3.3.6 . > > OK, so if you run a kernel > 2.2.17 and X4, you can use PC keymaps, in > fact you should *avoid* mac keymaps... I´m running the default kernel of the official debian ppc potato > > > Has anybody a @ with default keymap? > > I have the default US keymap, on a UK kbd, but that's probably not the > thing you wanted to hear =P > > > I don't understand the X11 keymap concept ... > > Each key of your keyboard corresponds a keycode, then you will map each > key to an "action", for example: on my kbd, 0x41, the action is > Caps_Lock. X (every version) also tries to grab the configuration from > the console, with some versions doing better than others... this is like console keymap ... i made one for my keyboard. And I´ve now disabled xkb and perhaps i get the keymap work with Xmodmap But I found no manpages to Xmodmap ...:( > > Type "xmodmap -pk | less" to see the current keytable. > ok ... thanks ... :) -- Michael Flaig ... PROLinux
Re: XFree4.0x and Pismo touchpad
On Tue, Nov 21, 2000 at 02:41:54PM +0100, Michael Schmitz wrote: > > > See the documentation on the new input layer, linked on BenH's page > > > (penguinppc.apple.com/~benh/). > > > > Are you sure the above url is correct? I seem to have trouble connecting > > to it. I also tried penguinppc.org/~benh, but got the response 403 > > Forbidden. > > Well, in this case try ppclinux.apple.com. All I can remember is that it's > not linuxppc.apple.com :-) > > > > Get the trackpad tool. 'trackpad notap' fixes this. Now what package was > > > that in, or should that go into? > > > > Ok, I will search for it. Any pointers to the right package would be great > > though. ;) > > I don't know, this was a honest question. The source for trackpad should > be in the pmud source package (look at the contrib dir) but the tool > really has nothing to do with pmud and should be in some other package. If got the Source Package. You only need one c file and compile it. I can send it to you if you want. cu, mfl > > Michael > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
KDE2 ?
Hi! I've installed KDE 2 ... (I wanted to see KDE 2 before KDE 2.1 is out ;) ) Not bad ... Great Desktop Environment ... but a little Bit unstable. I saw that the potato packages are old ones ! kde2.0pre ... aren't there any packages more up to date ? thanks a lot... cu, mfl -- Michael Flaig ... PROLinux
xlibs-dev and libxaw-dev broken ...
Hello! Does anyone know when this bug will be fixed. I want to install helixgnome but can't compile because installation of xlib6g-dev fails. Greets, mfl -- Michael Flaig ... PROLinux
Re: XFree 4.0.1-8 won't run on r128/ppc
Hello! Nearly the same problem in my Powerbook G3 "Firewire" Ich get "no screens found" Where can I download Ani Joshi's Packages ? thanks, mfl On Wed, Nov 29, 2000 at 10:28:10AM +, Bertrand Sereno wrote: > On Tuesday 28 November 2000 7:52 pm, Matt Brubeck wrote: > > > > I have a slot-loading iMac with Rage 128 video. All of the phase2 test > > packages of XFree86 4 ran fine on this machine. > > > > After upgrading xserver-xfree86 from phase2v27 to 4.0.1-8, the X server > > dies on startup with the following error (full log attached): > > Hi, > > Same kind of problem for me (on an iBook). But if I replace the broken > ati_drv.o with Ani Joshi's one, the 4.0.1-8 debs work just fine. Perhaps you > should try to move your previous driver (since your phase2 debs were working). > > Bertrand. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
Re: XFree 4.0.1-8 won't run on r128/ppc
On Wed, Nov 29, 2000 at 01:21:02PM +, Bertrand Sereno wrote: > On Wednesday 29 November 2000 12:49 pm, Michael Flaig wrote: > > Hello! > > > > Nearly the same problem in my Powerbook G3 "Firewire" > > Ich get "no screens found" > > > > Where can I download Ani Joshi's Packages ? > > It's not a whole package, just a file ati_drv.o for Mach64 cards. I think it > was available three or four months ago on www.penguinppc.org/usr/xf4, but it > looks like it has been removed. There is a copy of it on my website > http://www.emse.fr/~sereno/ati_drv.o.gz. Move it to > /usr/X11R6/lib/modules/drivers/ and modify your XF86Config file. Hi! This Driver is only for Mach64. So it won't run on my Powerbook. The Chipset is "Rage Mobility 128" greets, mfl > > (Ani, if there is any copyright or whatever problem, tell me and I will > remove the driver). > > Bertrand. -- Michael Flaig ... PROLinux
Re: sound support on a Pismo
Sorry, sent mail not to the list ... - Forwarded message from Michael Flaig - Date: Wed, 29 Nov 2000 19:19:16 +0100 From: Michael Flaig To: Michel Dänzer <[EMAIL PROTECTED]> Subject: Re: sound support on a Pismo User-Agent: Mutt/1.0.1i In-Reply-To: <[EMAIL PROTECTED]>; from [EMAIL PROTECTED] on Wed, Nov 29, 2000 at 04:36:52PM +0100 On Wed, Nov 29, 2000 at 04:36:52PM +0100, Michel Dänzer wrote: > Stephen Judd wrote: > > > I have sound working on my Pismo, but not completely. That is, I can get > > sound through the sound-out socket, but not through the speakers. > > The speakers should also work with either any recent 2.4 kernel or a recent > 2.2 kernel from Benjamin Herrenschmidt. Good ... I´ve already search for drivers to get the internal speakers to work. Are there Problems with compiling the 2.4 kernel on a Pismo ? > > > I have a 'first version' Pismo BTW, maybe they changed something for the > latest ones? only power Management was changed ... because of firewire ports ... is it possible to use pmud on the Pismo "Firewire" ? Greets, mfl > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and The DRI Project > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux - End forwarded message - -- Michael Flaig ... PROLinux
Re: XFree 4.0.1-8 won't run on r128/ppc
Hello! In my case the Pismo restartet without shutdown. I think there was a kernel panic, because of a bug ... cu, mfl On Wed, Nov 29, 2000 at 04:46:47PM +0100, Michel Dänzer wrote: > dog wrote: > > > additionally, i find that when the display blanks (using the fbdev driver, > > of course) i lose the console totally and can't regain it by any means other > > than rebooting the machine. > > Do you mean the bug that it blanks the screen even when you're in console? You > should be able to get the display back by switching back to X and having it > unblank. > > > > one thing i don't understand is why, when the fbdev driver uses the > > "default" mode, it *still* queries the framebuffer and then sets it > > explicitly. if it just reused the existing settings, for instance, i could > > use offb (which is readonly and doesn't support being set explicitly) to run > > x. > > It has to query the framebuffer device to fake an XFree86 mode which is then > used like a user- or pre-defined mode (thus the mode setting). > > It should work with offb though, all it really needs there is the resolution > and depth/bpp which even offb should report correctly. Or doesn't offb just > ignore mode settings? > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and The DRI Project > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
XFree 4.0.1-8 on Pismo was: XFree 4.0.1-8 won't run on r128/ppc
On Wed, Nov 29, 2000 at 02:06:14PM +, Bertrand Sereno wrote: > > This Driver is only for Mach64. So it won't run on my Powerbook. > > The Chipset is "Rage Mobility 128" > > You're right and the title of this thread is now rather irrelevant. Main idea > was that if previous debian packages were working, then you just have to > import (at least, it worked for me) your 'old' driver with the new packages. > But I have no clues about Rage 128 Pro. The old driver, that worked was the xfree3.3.6 framebuffer device ... this driver is awful slow and near at the point of "not useable" ... has somebody get xfree4 on a pismo to work ? thanks ... mfl > > Sorry for that, > > Bertrand. -- Michael Flaig ... PROLinux
Re: help installing from the CD-ROM on an iMac
Hello! I didn´t understand what you problem is (my poor english - i know) but if your problem is to geht the CD booted you should press "c" on booting ... ... after switching on the iMac press c ... cu, mfl On Wed, Nov 29, 2000 at 10:42:06AM -0500, Jack Lawler wrote: > The instructions are incomplete. I think I want the openfirmware commands > to load a boot-file (ofboot.b ?) from the CD-ROM. Section 6.3.3 > "Installing from > Openfirmware" has been left blank, because it has not been written yet. I > do > not have a floppy disk drive. Any help would be appreciated. > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
Bugfix xfree4 - r128 fixed ???
Hi whats the state of the r128 Driver ? is the Bug allready fixed ? it doesn´t work on my Pismo since 1 week ago as the xserver-xfree86 was updated ... greets, mfl -- Michael Flaig ... PROLinux
Re: r128 driver still borked in XF4.0.1-9pre10
Hi! I´ve got the Problem: "no screens found" where can I get the working packages ? I want to use r128 on my new Pismo... thanks Michael -- Michael Flaig ... PROLinux
Re: r128 driver still borked in XF4.0.1-9pre10
On Wed, Dec 06, 2000 at 05:11:50PM +0100, Michel Dänzer wrote: > Michael Flaig wrote: > > > I´ve got the Problem: "no screens found" where can I get the working > > packages ? > > "no screens found" is not a problem, it's the last error message of the server > which can be caused by a zillion problems. We can't tell what the actual > problem is without more information. Hm ... OK ... > > > Anyway, I had to learn the hard way last night that 4.0.1-8 doesn't work on my > Pismo either (the infamous cannot read V_BIOS), which version should the patch > for that be in? I've the same Problem. I think it is the same ... (II) R128(0): PCI bus 0 card 16 func 0 (**) R128(0): Depth 16, (--) framebuffer bpp 16 (II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps) (==) R128(0): Default visual is TrueColor (==) R128(0): RGB weight 565 (II) R128(0): Using 6 bits per RGB (8 bit DAC) (II) R128(0): initializing int10 (EE) R128(0): Cannot read V_BIOS (4) (--) R128(0): Chipset: "ATI Rage 128 Mobility LF (AGP)" (ChipID = 0x4c46) (--) R128(0): Linear framebuffer at 0xa400 (--) R128(0): MMIO registers at 0xa000 (--) R128(0): BIOS at 0xa002 (--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1) (II) R128(0): Using flat panel for display (WW) R128(0): Video BIOS not detected in PCI space! (WW) R128(0): Attempting to read Video BIOS from legacy ISA space! (WW) R128(0): Video BIOS not found! (II) R128(0): PLL parameters: rf=9216 rd=33153 min=142346240 max=1639687683; xclk=50047 (II) R128(0): initializing int10 (EE) R128(0): Cannot read V_BIOS (4) (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (EE) Screen(s) found, but none have a usable configuration. Greets, mfl > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and the DRI project -- Michael Flaig ... PROLinux
Re: r128 driver still borked in XF4.0.1-9pre10
On Wed, Dec 06, 2000 at 04:52:48PM +0100, Michel Dänzer wrote: > Jonathan Lane wrote: > > > > > I > > > > Put this line in your /etc/apt/sources.list: > > > > deb http://people.debian.org/~branden/ woody/powerpc/ > > Not Found > > The requested URL /~branden/woody/ was not found on this server. > > > They aren't there anymore, X 4.0.1x has been integrated into woody. > I can get them. Download is in progress ... > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and the DRI project -- Michael Flaig ... PROLinux
Re: r128 driver still borked in XF4.0.1-9pre10
Hi again... I've downloaded and configured XFree4 ... but when I run startx the system starts XFree and then freezes. I have to reboot with switching off. I can't make logs of the output, because the filesystem doesn't sync before switching off ... My Machine is a Pismo 400 / 128 MB / Ati Rage Mobility 128 ... Kernel is the default one of Debian PPC 2.2r0 . A 2.2.17. Installed X Packages ... saratoga:~# dpkg --list 'x*' | grep ii ii xbase-clients 4.0.1-9pre10v1 miscellaneous X clients ii xfonts-100dpi 4.0.1-9pre10v1 100 dpi fonts for X ii xfonts-75dpi 4.0.1-9pre10v1 75 dpi fonts for X ii xfonts-base4.0.1-9pre10v1 standard fonts for X ii xfonts-scalabl 4.0.1-9pre10v1 scalable fonts for X ii xfree86-common 4.0.1-9pre10v1 X Window System (XFree86) infrastructure ii xfs4.0.1-9pre10v1 X font server ii xlib6g 4.0.1-9pre10v1 pseudopackage providing X libraries ii xlibs 4.0.1-9pre10v1 X Window System client libraries ii xlibs-dev 4.0.1-9pre10v1 X Window System client library development f ii xserver-common 4.0.1-9pre10v1 files and utilities common to all X servers ii xserver-xfree8 4.0.1-9pre10v1 the XFree86 X server ii xutils 4.0.1-9pre10v1 XFree86 utility programs ii xvfb 4.0.1-9pre10v1 virtual framebuffer X server ii xviddetect 0.3-2.1XFree86 installation helper XF86Config-4 atached ... thanks for your help! mfl On Wed, Dec 06, 2000 at 08:09:16AM -0500, Jonathan Lane wrote: > > I > > Put this line in your /etc/apt/sources.list: > > deb http://people.debian.org/~branden/ woody/powerpc/ > > Regards, > Jonathan -- Michael Flaig ... PROLinux # XF86Config-4 (XFree86 server configuration file) generated by Dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config manual page. # (Type "man XF86Config" at the shell prompt.) Section "Files" FontPath"unix/:7100"# local font server # if the local font server has problems, we can fall back on these FontPath"/usr/lib/X11/fonts/misc" FontPath"/usr/lib/X11/fonts/cyrillic" FontPath"/usr/lib/X11/fonts/100dpi/:unscaled" FontPath"/usr/lib/X11/fonts/75dpi/:unscaled" FontPath"/usr/lib/X11/fonts/Type1" FontPath"/usr/lib/X11/fonts/Speedo" FontPath"/usr/lib/X11/fonts/100dpi" FontPath"/usr/lib/X11/fonts/75dpi" EndSection Section "ServerFlags" EndSection Section "Module" Load"ddc" # Load"GLcore" Load"dbe" # Load"dri" Load"extmod" Load"glx" Load"pex5" Load"record" Load"xie" Load"bitmap" Load"freetype" Load"speedo" Load"type1" Load"vbe" Load"int10" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "AutoRepeat""250 30" Option "XkbRules" "xfree86" Option "XkbModel" "macintosh" Option "XkbLayout" "de" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "CorePointer" Option "Device""/dev/gpmdata" Option "Protocol" "IntelliMouse" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "Generic Video Card" Driver "r128" BusID "0:16:0" EndSection Section "Monitor" Identifier "Generic Monitor" HorizSync 28-49 VertRefresh 43-72 EndSection Section "Screen" Identifier "Default Screen" Device "Generic Video Card" Monitor "Generic Monitor" DefaultDepth8 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display"
compiled Kernel 2.4 for Powerbooks ???
Hi! Is there a Website or Debian Path to get compiled Kernel 2.4testXX for my Pismo. XFree4 hangs the whole system. (see mail: Subject: Re: r128 driver still borked in XF4.0.1-9pre10 from yesterday) I think it could be a Problem with the kernel so I want to test another kernel. Actually 2.2.17 of Debian 2.2r0 is running ... thanks for your help! greets, mfl -- Michael Flaig ... PROLinux
Re: compiled Kernel 2.4 for Powerbooks ???
On Wed, Dec 06, 2000 at 09:08:55PM -0900, Ethan Benson wrote: > On Thu, Dec 07, 2000 at 07:02:53AM +0100, Michael Flaig wrote: > > Hi! > > > > Is there a Website or Debian Path to get compiled Kernel 2.4testXX for my > > Pismo. > > > > XFree4 hangs the whole system. (see mail: Subject: Re: r128 driver still > > borked in XF4.0.1-9pre10 from yesterday) > > I think it could be a Problem with the kernel so I want to test another > > kernel. Actually 2.2.17 of Debian 2.2r0 is running ... > > why not compile one yourself? its not that hard. Hi! i386 kernels aren't a problem to me. But powermac kernels are ... i don't know much about the architecture of my pismo. I'm new to the PPCs, so it's not that easy to me. OK i think, i will compile one myself ... if it doesn't work i can get an precompiled one. Should I compile the official or are there better modificated kernels (benh !?) ??? thanks, mfl > > -- > Ethan Benson > http://www.alaska.net/~erbenson/ -- Michael Flaig ... PROLinux
Re: compiled Kernel 2.4 for Powerbooks ???
On Thu, Dec 07, 2000 at 01:16:59PM +0100, Bastien Nocera wrote: > Quoting Michael Flaig <[EMAIL PROTECTED]>: > > > On Wed, Dec 06, 2000 at 09:08:55PM -0900, Ethan Benson wrote: > > > On Thu, Dec 07, 2000 at 07:02:53AM +0100, Michael Flaig wrote: > > > > Hi! > > > > > > > > Is there a Website or Debian Path to get compiled Kernel 2.4testXX > > for my Pismo. > > > > > > > > XFree4 hangs the whole system. (see mail: Subject: Re: r128 driver > > still borked in XF4.0.1-9pre10 from yesterday) > > > > I think it could be a Problem with the kernel so I want to test > > another kernel. Actually 2.2.17 of Debian 2.2r0 is running ... > > > > > > why not compile one yourself? its not that hard. > > > > Hi! > > > > i386 kernels aren't a problem to me. But powermac kernels are ... > > i don't know much about the architecture of my pismo. > > I'm new to the PPCs, so it's not that easy to me. > > > > OK i think, i will compile one myself ... if it doesn't work i can get > > an precompiled one. > > > > Should I compile the official or are there better modificated kernels > > (benh !?) ??? > > If you don't know anything about the architecture or the hardware of your > Pismo, > stare about 30 minutes looking at the boot messages... It will work after. I know about the hardware but not more than you know if you read the manual ... i don´t know which drivers to compile to get the support for IrDA, Firewire, PCMCIA, internal speakers, framebuffer ... etc. I have to read much more documentation, that I can within this Weekend. > > But then, you said you want to get a devel kernel. and afaik Ben doesn't have > a > devel kernel, only a stable one. Check http://kernel.xorsis.com/ > > Test and trial is the best way to know how to compile a kernel... The best > devel yes you are right ... > kernel you could get is Paulus'. I tried during one evening to make Linus' > work > hacking and patching, and bothering people on IRC, and I gave up. Paulus' > kernel > that I got the day after just worked, without patching on top of it.. thanks, mfl. > > Cheers > > /Bastien Nocera -- Michael Flaig ... PROLinux
Re: r128 driver still borked in XF4.0.1-9pre10
On Thu, Dec 07, 2000 at 03:42:44PM +0100, Michel D?nzer wrote: > Michael Flaig wrote: > > > I've downloaded and configured XFree4 ... but when I run startx the system > > starts XFree and then freezes. I have to reboot with switching off. > > > > I can't make logs of the output, because the filesystem doesn't sync before > > switching off ... > > You could re-mount your fs like this before starting X: > > mount -n -o remount,sync / > > Might also save you trouble with damaged filesystem(s) et al. ;) > > > My Machine is a Pismo 400 / 128 MB / Ati Rage Mobility 128 ... > > > > Kernel is the default one of Debian PPC 2.2r0 . A 2.2.17. > > >From your XF86Config: > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device""/dev/gpmdata" > Option "Protocol" "IntelliMouse" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Is there a reason you use the GPM repeater device? GPM supports multiple input devices so the trackpad and the usb mouse works at the same time ... > > > I think it could be a Problem with the kernel so I want to test another > > kernel. > > I wouldn't expect that to change anything wrt X. The kernel has never had any > influence on X for me. (If you used Option "UseFBDev" that would be a > different story) Does XF4 work on your Pismo now ? cu, mfl > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and the DRI project > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
Re: r128 driver still borked in XF4.0.1-9pre10
On Thu, Dec 07, 2000 at 06:58:23PM +0100, Michel D?nzer wrote: > Michael Flaig wrote: > > > > Is there a reason you use the GPM repeater device? > > > > GPM supports multiple input devices so the trackpad and the usb mouse works > > at the same time ... > > The new input layer does that for you as well in the form of /dev/input/mice . hey, cool! Where can I find documentation to get this to work. > > > > > > I think it could be a Problem with the kernel so I want to test another > > > > kernel. > > > > > > I wouldn't expect that to change anything wrt X. The kernel has never had > > > any influence on X for me. (If you used Option "UseFBDev" that would be a > > > different story) > > > > Does XF4 work on your Pismo now ? > > No, not the -8 packages. Waiting for new ones... Have you downloaded the xfree4 from deb http://people.debian.org/~branden/ woody/powerpc/ they are now -10 ... the bug of -8 packages is fixed but now the packages hang my pismo which is my biggest problem at all. there are much more problems ;( cu, mfl > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and the DRI project > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
Compiling Kernel 2.4 ... strange problems ...
Hi! I compiled the Kernel 2.4 ... kwl, it compiled but ... ... when the kernel is boots I´m landing in the Open Firmware. What is that ? How did I get there ? Strange ... I took the Kernel that is compiled as zImage in /usr/src/linux-pmac-devel/arch/ppc/chrpboot/ Has anyone had this problems ? how can I solve this ? thanks, mfl PS. It´s a Pismo 400 and the Framebuffer Driver for Rage128 is compiled in ... Which IrDA Interface is in my Pismo 400 ? Which Driver do I need ? -- Michael Flaig ... PROLinux
Re: Compiling Kernel 2.4 ... strange problems ...
On Sun, Dec 10, 2000 at 07:50:02AM +0100, Claus wrote: > >: Which IrDA Interface is in my Pismo 400 ? Which Driver do I need ? > > palm, print, PB, phone? > almost everything is explained in the irda howto. > > 7:[EMAIL PROTECTED]/1 ~ > dmesg | grep tty > tty00 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem-printer > tty01 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = infrared (IrDA) Which driver do I need to get these 2 interfaces ? serial driver ? > 7:[EMAIL PROTECTED]/1 ~ > env | grep PIL > PILOTPORT=/dev/ircommnew0 > PILOTRATE=115200 > 7:[EMAIL PROTECTED]/1 ~ > cat /usr/src/linux/.config | grep _IR > CONFIG_IRDA=m > CONFIG_IRLAN=m > CONFIG_IRCOMM=m > CONFIG_IRDA_ULTRA=y > CONFIG_IRDA_OPTIONS=y > CONFIG_IRDA_CACHE_LAST_LSAP=y > CONFIG_IRDA_FAST_RR=y > CONFIG_IRDA_DEBUG=y > CONFIG_IRDA_COMPRESSION=y > CONFIG_IRDA_DEFLATE=m > CONFIG_IRTTY_SIR=m > CONFIG_IRPORT_SIR=m > # CONFIG_SMC_IRCC_FIR is not set > > apple:~# irattach /dev/ttyS1 > 1.1 Tue Nov 9 15:30:55 1999 Dag Brattli > apple:~# irmanager -d 1 > apple:~# cat /proc/net/irda/discovery > IrLMP: Discovery log: > > nickname: knarz, hint: 0x8220, saddr: 0x1c12333c, daddr: 0xa660df5f > > > you will probably need irda-tools, irda-common, pilot-link > and for a phone the gsmlib...package: > > Description: Library to access GSM mobile phones through GSM modems > This distribution contains a library to access > GSM mobile phones through GSM modems. Features include: > * modification of phonebooks stored in the > mobile phone or on the SIM card > * reading and writing of SMS messages stored in > the mobile phone > * sending and reception of SMS messages > Additionally, some simple command line programs are > provided to use these functionalities. thanks, for your help ... i will test it today ... if the kernel compiles. I get many undefinded refercences ... but I think I´ve kicked enough drivers I don´t need at the moment t get the Kernel to work ;) cu, mfl > > > > > Claus > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux zur Studie des TÜVIT Windows2000 gegen Linux: "Studien sind toll. Und wertvoll. Und sollten immer griffbereit sein, wenn man auf der Toilette mit der Verdauung kämpft"
Re: How can I play music?
Have you Installed the default kernel ? loaded the module soundcore and dmasound !? permissions to write to the audio-device ( add you login name in /etc/group after like in my example: audio:x:29:mfl,ahe,bkl ) It should work now with xmms mp3blaster or whatever you want ... I´m using aumix and gtkaumix ... what are MODs ? For Music CDs: xmcd cu, mfl On Sat, Dec 09, 2000 at 09:20:02PM -0600, Garry Roseman wrote: > I installed the Debian Potato release w/ dmasound onto a PowerMac > 7600/G3 some weeks ago. I've been going up the learning curve fairly > smoothly. Now that I have the fundamentals working (XFree86 3.3.6, > netatalk, icewm, tkdesk, tetex, lyx, mozilla) I tried to use xmms to > play MOD music -- there was only a hissing sound. I also tried > enabling sound in TkDesk but no sounds are heard. I've checked the > archive for this mail list and the ppc installation guide and I don't > see any instructions on playing music, enabling sound output, or > using xmms. What command line and X utilities should I be using to > control audio output and how can I play music CDs and MODs? > > -- > Garry "writing technical documentation using Linux if it kills me -- ouch!" > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux zur Studie des TÜVIT Windows2000 gegen Linux: "Studien sind toll. Und wertvoll. Und sollten immer griffbereit sein, wenn man auf der Toilette mit der Verdauung kämpft"
Re: Configuring kernel 2.4 - have nearly the same problem ...
Hi again! I get a failure nearly the same i think ... When INIT starts : Checking root file system ... Parallelizing fsck version 1.19 (13-Jul-2000) fsck.ext2: No such file or directory while trying to open /dev/hda11 (null): The superblock could not be read [...] Give root password [...] and then the system hangs. What problem could that be ? /dev/hda11 is my root partition ... it´s ext2 (kernel 2.2 format) Could my kernel .config help ? greets, mfl On Sat, Dec 09, 2000 at 11:03:14PM -0500, Charles Brunet wrote: > Hi! > > I'm still trying to compile my kernel. This is the error I get when booting: > > EXT2_fs: unable to read superblock > isofs_read_super: bread failed, dev=03:0d, iso_blknum=16, block=32 > hda=: bad access: block=0, count=1 > end_request: I/O error, dev 03:0d (hda), sector 0 > hfs_fs: unable to read block 0x from dev 03:0d > hfs_fs: Unable to read block 0 > kernel panic: VFS: Unable to mount root fs on 03:0d > > > I guess there is something wrong in my configuration file, but I can't > figure out what. Could somebody send me its configuration file? (I'm usign > an iBook) > > > > \ Charles Brunet <[EMAIL PROTECTED]> > \ Étudiant, génie informatique, Université Laval > \ http://www.gel.ulaval.ca/~brunet01/ > > Hi, I'm a deadlk e-mail virus, please copk me into kour .signature > file to help me spread. :: Bonjour, je suis un dangereux virus. SVP > copiez-moi dans votre fichier .signature pour m'aider à me propager. > -*- new version, Y2K compliant! -*- > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux zur Studie des TÜVIT Windows2000 gegen Linux: "Studien sind toll. Und wertvoll. Und sollten immer griffbereit sein, wenn man auf der Toilette mit der Verdauung kämpft"
Kernel ... selfmade ones ...
... didn´t boot ... I build several kernels (2.4.0test11 from paulus and 2.2.18pre21 from paulus) but they didn´t run ... The stable one crashes at a system adress ... when the ppp module is loaded ... the 2.4.0test11 simply hangs on booting ... I don´t know why. I´ll send my .config with this mail. Perhaps you can see am option that is not needed. or needed and not aktivated ... ... My Mashine is a Pismo 400 (the one with Rage Mobility 128 ... Firewire and 10 GB HD) thanks, Michael PS. Has anyone get XFree4 running on this hardware !? please send me your config ... thanks.
Re: Kernel ... selfmade ones ...
It works !!! it works ... thanks a lot ... and it's fast very fast ... framebuffer with xfree3 is so slow ... but xf4 is very fast ... cool :) we'll se if the keyboard works right ... thanks, mfl On Tue, Dec 12, 2000 at 07:44:13PM +, Stephen Judd wrote: > Michael Flaig wrote: > > > > > PS. Has anyone get XFree4 running on this hardware !? please send me your > > config ... thanks. > > Yes, I have. I built it some months ago from Ani Josh's sources some > months ago. XF86Config attached. > -- Michael Flaig ... PROLinux zur Studie des TÜVIT Windows2000 gegen Linux: "Studien sind toll. Und wertvoll. Und sollten immer griffbereit sein, wenn man auf der Toilette mit der Verdauung kämpft"
Re: debian-powerpc: web browsers with java enabled
On Thu, Dec 14, 2000 at 05:20:48PM +1100, Brendan J Simon wrote: > I'm running a PowerMac G4 and a PowerBook with Firewire (I think it's > called a Pismo ?). > I can't find a browswer that has Java enabled. I'm currently using > Mozilla which is quite buggy but is orders of magnitudes better than the > previous debian version. netscape is java ready ... install netscape-java... and it should work. > > Does anyone know of any browsers for powerpc with Java capabilities or > how to get Mozilla to support Java ? Mozilla ... I think it would be a better idea to install netscape 4.7 and netscape-java ... > > I also would like security (I guess this means SSL but there might be > other options). Any clues ?? SSL isnt in Mozilla, yet. You should use netscape with 128bit encycryption is it already in netscape ? perhaps you will need the fourtify plugin. hope i could help you ... cu, mfl > > Thanks, > Brendan Simon. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux
XF4 and Keymaps !?
Hello! Are the keymaps of xf4 broken ? i have a german keyboard and configured it do german, but some keys are missing. The "Alt" and "Meta" (Apple) Key doesnt work ... Is there work in progress to fix this ? Is there documentation, that explains how the keymap of xf4 works and how to modify it, to get alt and meta to work !? thanks a lot, mfl -- Michael Flaig ... PROLinux
Re: XF4 and Keymaps !?
sure... here it is ... Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "AutoRepeat""100 50" # If the keyboard layout is fscked, try this Option "XkbDisable" Option "XkbRules" "xfree86" #Option "XkbModel" "amiga" Option "XkbLayout" "de_DE" Option "XkbOptions""ctrl:nocaps" #Option "XkbRules" "xfree86" Option "XkbModel" "macintosh" # Option "XkbLayout" "us" #Option "XkbOptions""ctrl:nocaps" EndSection any ideas ? cu, mfl On Thu, Dec 14, 2000 at 04:25:34PM +0100, Michel Dänzer wrote: > Michael Flaig wrote: > > > Are the keymaps of xf4 broken ? > > i have a german keyboard and configured it do german, but some keys are > > missing. > > > > The "Alt" and "Meta" (Apple) Key doesnt work ... > > > > Is there work in progress to fix this ? > > Is there documentation, that explains how the keymap of xf4 works and how to > > modify it, to get alt and meta to work !? > > Can you please post the relevant parts of your XF86Config? > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and the DRI project -- Michael Flaig ... PROLinux zur Studie des TÜVIT Windows2000 gegen Linux: "Studien sind toll. Und wertvoll. Und sollten immer griffbereit sein, wenn man auf der Toilette mit der Verdauung kämpft"
Re: XF4 and Keymaps !?
On Thu, Dec 14, 2000 at 07:08:28PM +0100, Michel D?nzer wrote: > Michael Flaig wrote: > > > > On Thu, Dec 14, 2000 at 06:48:12PM +0100, Michel Dänzer wrote: > > > Michael Flaig wrote: > > > > > > > Option "XkbDisable" > > > > > > You have disabled Xkb. This may be the reason for your problem. > > yes, you're right ... *g* > > > > > > > Option "XkbLayout" "de_DE" > > > > > > AFAICS you'd need just "de" here. > > ok... > > > > > > > #Option "XkbRules" "xfree86" > > > > > > You should probably uncomment this. > > > > > > > Option "XkbModel" "macintosh" > > > > > > Do you use the new input layer with Linux keycodes? If yes, change this to > > > "pc105". > > > > I think i don't use new input layer. I'm using the old 2.2.17 of 2.2r0 ... > > So what happens if you apply my other hints and enable Xkb? ok ... it´s better. But by example @ is on Alt + L ... ?! > > > Michel > > > -- > Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast > Debian GNU/Linux (powerpc,i386) user \ member of XFree86 and the DRI project -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Re: XF4 and Keymaps !?
I´ve found the keymap he is loading ... i think it is /etc/X11/xkb/symbols/macintosh/de i´ll modify it now ... but how is this sign '^' called ? thanks... cu, mfl -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
X Keymap German ... PowerBook ...
Hi all! Has somebody working German X-Keymaps for XF4 ... ??? The Keymap should work on PowerBooks ... I've tried to understand how xkb works, but this wasn't a success ... Thanks, mfl -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
paulus kernels - where are they gone ?
Hi all...
I wanted to download a new Version of Paulus´ Development kernel but
when I checked kernel.xorxis.com I can´t find any Paulus Kernels.
Are the Patches merged in the official Kernel ?
My second question is: Has anybody get pmud to run on a PowerBook "2000 Modell"
!?
when I install it, my Harddisk stops and the system can´t do anything. Mouse
and
Keyboard does work. The Harddisk suspends I think and doesn´t wake up again on
access.
Greets and a Happy New Year ...
mfl
--
Michael Flaig ... PROLinux (www.pro-linux.de)
News, free web support and discussion forum
MobilePhone: +49 179 2200049
Re: paulus kernels - where are they gone ?
On Sun, Dec 31, 2000 at 10:29:14AM -0700, Jason E. Stewart wrote: > "Michael Flaig" <[EMAIL PROTECTED]> writes: > > > My second question is: Has anybody get pmud to run on a PowerBook > > "2000 Modell" !? when I install it, my Harddisk stops and the > > system can´t do anything. Mouse and Keyboard does work. The Harddisk > > suspends I think and doesn´t wake up again on access. > > Which version of pmud are you installing? I'm running 0.7-2 with a 2.4 > kernel on my pismo without any problems. I´m running kernel 2.2.17 (from 2.2r0) ... and pmud is 0.7-3 ... perhaps the kernel is too old. But I didn´t geht a newer one to run ... cu, mfl > > jas. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Re: paulus kernels - where are they gone ?
On Sun, Dec 31, 2000 at 09:04:32PM +1100, Steven Hanley wrote: > On Sun, Dec 31, 2000 at 10:35:26AM +0100, Michael Flaig wrote: > > I wanted to download a new Version of Paulus´ Development kernel but > > when I checked kernel.xorxis.com I can´t find any Paulus Kernels. > > well stable tree, all ppc stuff is merged ionto 2.2.18 (thanks to alan) and > thus ftp.kernel.org is the official site, unstable tree (2.4.*) however > kernel.org is broken on ppc, so grab the paulus rsyncs or bitkeeper things, > the paulus rsyncs are available as always from > rsync -avz --delete penguinppc.org::linux-pmac-stable or similar. Couldn´t get the kernel but have got the problem with 2.4.0test11-paulus. the rtc was my problem. If I compile in support the kernel hangs ... If don´t compile it in the kernel does nothing for about 10 seconds and then continued booting after setting the clock ... > > > Are the Patches merged in the official Kernel ? > > see above. > > > My second question is: Has anybody get pmud to run on a PowerBook "2000 > > Modell" !? > > when I install it, my Harddisk stops and the system can´t do anything. > > Mouse and > > Keyboard does work. The Harddisk suspends I think and doesn´t wake up again > > on access. > > yesm I have it running on my brand new pismo, though I have yet to try > closing the lid while in linux, works fine it seems with 2.2.17 debian > kernel and 2.4.0-test12-pre3, nothing dies at least. hm ... I tink I´ll try the 2.4.0-test12-pre3 ... suspend to ram is a feature i need ... shutdown and booting is bad ... cu, mfl > > See You > Steve > > -- > [EMAIL PROTECTED] http://wibble.net/~sjh/ > Look Up In The Sky >Is it a bird? No > Is it a plane? No > Is it a small blue banana? > YES > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Re: Getting 1024x768 on X on Powerbook firewire
On Mon, Jan 01, 2001 at 10:29:28PM +0900, Marshal Wong wrote: > Hello all. I hope you've all had a great new year. > > I'm trying to get X at 1024x768 on a Powerbook firewire. Has anyone been > successful in such a situation? I have a sneaking suspiction that the > reason none of the modelines for higher resoutions are accepted is because > the frequecys for the monitor are too low in XF86config. However, I don't > know, and have been unable to find, the information for the LCD screens > frequencies. So any help or information would be appreciated. Thanks! I´ve created a config 3 hours ago. It´s for XFree4 ... I send you my XF86Config with this mail. If you install xserver-xfree86 you can configure you xserver. If you choose medium when the question to set the screen appears you can set 1024X768 at 60 hz ... everthing should work perfect if you set the keyboard right ;) cu, mfl > > Marshal > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049 # XF86Config-4 (XFree86 server configuration file) generated by Dexconf, the # Debian X Configuration tool, using values from the debconf database. # # Edit this file with caution, and see the XF86Config manual page. # (Type "man XF86Config" at the shell prompt.) Section "Files" FontPath"unix/:7100"# local font server # if the local font server has problems, we can fall back on these FontPath"/usr/lib/X11/fonts/misc" FontPath"/usr/lib/X11/fonts/cyrillic" FontPath"/usr/lib/X11/fonts/100dpi/:unscaled" FontPath"/usr/lib/X11/fonts/75dpi/:unscaled" FontPath"/usr/lib/X11/fonts/Type1" FontPath"/usr/lib/X11/fonts/Speedo" FontPath"/usr/lib/X11/fonts/100dpi" FontPath"/usr/lib/X11/fonts/75dpi" EndSection Section "ServerFlags" EndSection Section "Module" Load"ddc" Load"GLcore" Load"dbe" Load"dri" Load"extmod" Load"glx" Load"pex5" Load"record" Load"xie" Load"bitmap" Load"freetype" Load"speedo" Load"type1" Load"vbe" Load"int10" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "AutoRepeat""100 50" # If the keyboard layout is fscked, try this #Option "XkbDisable" Option "XkbLayout" "de" Option "XkbOptions""ctrl:nocaps" Option "XkbRules" "xfree86" Option "XkbModel" "macintosh" Option "XkbVariant""nodeadkeys" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "CorePointer" Option "Device""/dev/gpmdata" Option "Protocol" "MouseSystems" # Option "Protocol" "IntelliMouse" # Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "Generic Video Card" Driver "ati" VideoRam8092 BusID "PCI:0:16:0" Option "UseFBDev" Option "XAANoDashedBresenhamLine" EndSection # General Framebuffer Device driver Section "Device" Identifier "FBDev" Driver "fbdev" # Fill in the correct PCI ID for your graphics device here! BusID "PCI:0:16:0" # If you don't want to use the standard framebuffer device Option "fbdev" "/dev/fb1" Option "ShadowFB" "on" # This is mainly for reducing network traffic for remote display #Option "BackingStore" EndSection Section "Monitor" Identifier "Generic Monitor" HorizSync 28-49 VertRefresh 43-72 Option "DPMS" EndSection Section "Screen
Re: debian-powerpc: mozilla/browsers with java support ???
On Tue, Jan 02, 2001 at 05:45:22AM +0100, Björn Johansson wrote: > On Tuesday 02 January 2001 03:14, Brendan J Simon wrote: > > Does Mozilla have Java support ??? > > > > I am using Mozilla as it is the only browser that I know of the works on > > the PowerPC machines. I guess Communicator would be my preferred choice > > because it is much more stable that Mozilla, but Communicator is not > > available for PowerPC (at least not in .deb format). > > > > I really need a web browser with Java support so that I can do things > > like Internet Banking, etc. There are a lot more web sites that rely on > > broswers being Java enabled. Are there any other browsers for PowerPC > > with Java support ? > > > > Thanks, > > Brendan Simon. > > What about using Konqueror? I´m using communicator under Debian ... woody ... it is available ... i´m not sure if it is in potato but in woody it is ... cu, mfl > > -- > Regards Björn Johansson > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Michael Flaig ... PROLinux (www.pro-linux.de) News, free web support and discussion forum MobilePhone: +49 179 2200049
Re: Airport on new 700MHz iBook
hi, > After I iwconfig the card I get something like this. My ESSID > and WEP key values are correct. For the time being, anyway. :-) > > eth1 IEEE 802.11-DS ESSID:"F00N3T" Nickname:"wilde" > Mode:Managed Frequency:2.437GHz Access Point: 44:44:44:44:44:44 > Bit Rate:2Mb/s Tx-Power=15 dBm Sensitivity:1/3 > Retry limit:4 RTS thr:off Fragment thr:off > Encryption key:8FB9-D60C-7CF8-7F51-599F-E90D-12 > Power Management:off > Link Quality:0/92 Signal level:134/153 Noise level:134/153 > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:1 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > At this point I can't the card to do IP. I've tried setting the > mode to ad-hoc but I think "managed" is the right setting as I'm > connecting to a Linksys base station. The bitrate gets torqued > down to 2Mb/s after I try DHCP but the frequency gets set correctly > (a manual ifconfig doesn't get me any closer to doing IP either). The card goes to 2 MBit if it can`t find an access point in range ... mode managed is correct ... Perhaps you have to set the channel (frequency) if you haven`t > Clearly the Access Point MAC listed in the above output is wrong Yes, because your airport card couldn`t find your access point > but I'm not sure what the cause is. It's the first time I've done > 802.11b on Linux let alone using an Airport on an iBook. ;-) Have you tried without wep? have you mac address filtering at the base station on? turn it off ... good luck, Michael
Re: Short battery life on Powerbook Prismo
Am Mon, 2002-10-14 um 03.09 schrieb [EMAIL PROTECTED]: > Hi all, > [...] > If anyone has any ideas, I'd appreciate it. Thanks. Hi! I had 2 battery packs in my pismo for the last 2 years. 3 - 4 month ago I got only 1 hour out of each ... instead of 4 hours each when they were new. I charded them 1 to 2 times every day. Buyed new one 2 month ago. have now 2 low capacity batteries and a new one ... You can try the battery refresher. Get it somewhere on apple.com You need MacOS :-( It sets the full charded battery to empty, so your powerbook continues charging. Sometimes it works, sometimes not ;( Use at your own risk ... did not work in my case ... c ya, mfl
Re: The life of the batteries in the IBook running linux
Am Don, 2002-12-12 um 08.10 schrieb Rogério Brito:
> *BUT* the strange thing is that sometimes, out of the blue,
> the ring turns orange and the operating system (be it Linux or
> MacOS X) indicates that it is charging the battery.
hi
on my pismo the battery can't hold 100% charge. When the battery is 100%
full, charging is stopped until the battery lost 5% ...
i think apple keeps the battery full by recharging it when it lost 5%
capacity and not keep charging ... because full is full :-)
so this isn't a defective ... i hope ;)
cya,
mfl
--
Michael Flaig <[EMAIL PROTECTED]>
Re: What are the optimum keymap for a powerbook g4 400 ??
On Thu, Jan 02, 2003 at 11:26:07PM +0100, Willy Morin wrote: > Hi, > I've got a powerbook g4 400 under debian. > > I'm looking for the right keymap for my keyboard. > [...] You could try to modify your keymap with xkeycaps I found a version that includes a German Keymap for Powerbook G3 Pismo (I have a Pismo Firewire). The Keymap generated Mod4 on the Alt key, which did not do the same as Alt-GR (don't know what mod4 usually does) Have modified the Key to generate mode_switch (as on intel). Now it works better but not perfect. I can give you the xkeycaps that includes german pismo keyboard layout. It's easy to generate a xmodmap with this tool. Perhaps it helps you, too. you can get it (with powerbook keyboard layout) at my site (because I forgot where I downloaded this tar.gz :-( ) https://init.homeip.net/development/xkeycaps-2.46pb.tar.gz or without powerbook keyboard layout from your favourite debian mirror To build xkeycaps do apt-get build-dep xkeycaps to install all libs needed to build xkeycaps I'm trying to build a fully functional keymap, but had no time to finish this, yet. btw. Is the Keyboard Layout in DE the same as in US, CH, AT, etc? mfl -- Michael Flaig (PROLinux) [EMAIL PROTECTED] Home | https://init.homeip.net | my home in cyberspace PROLinux | http://www.pro-linux.de | the german open source portal LUUG-HN | http://www.luug-hn.org | linux unix user group heilbronn
Re: Airport: Tx excessive retries
On Mon, Jan 13, 2003 at 06:13:27PM -0500, christophe barbe wrote: [...] > By the way, I have no real trust in the wlan encryption (which AFAIK is > not very effective) and rely more on SSH, IMAPS, HTTPS and friends. Hi! OK, but many other Protocols are unencrypted and vulnerable to spoofing and sniffing... If you disable WEP you should use something like FreeS/WAN ipsec VPN to secure your connection. OK, you have more overhead than without any encryption but less than with WEP. Cheers, mfl [fullquotes are bad :-(] -- Michael Flaig (PROLinux) [EMAIL PROTECTED] Home | https://init.homeip.net | my home in cyberspace PROLinux | http://www.pro-linux.de | the german open source portal LUUG-HN | http://www.luug-hn.org | linux unix user group heilbronn
Re: French Keymap
On Wed, Jan 29, 2003 at 03:46:18PM +0100, Michael Herrmann wrote:
> Hi!
hi!
[...]
> Maybe somebody with a german keyboard too can give me any advise to fix my
> problem.
Have a look at : https://init.homeip.net/index.pl?category=public
You can find xkeykaps with the powerbook g3 (pismo) layout. I don't know
if the keyboard layout has changed, so have a look, i hope it fits your
needs. btw. i had do modify the keymap, so generates Alt keysym
and generates Mode_Switch (AltGR)
With xkeykaps you can create an .xmodmap file wich you can copy to
/etc/X11/Xmodmap to have it system-wide enabled. or load it as user with
xmodmap .xmodmap- after you generated the file with the tool.
I have all keys now ... :-)
cu,
mfl
--
Michael Flaig (PROLinux) [EMAIL PROTECTED]
Home | https://init.homeip.net | my home in cyberspace
PROLinux | http://www.pro-linux.de | the german open source portal
LUUG-HN | http://www.luug-hn.org | linux unix user group heilbronn
powerbook 15" 1Ghz question ...
Hi all, I thought about buying the Powerbook G4 15" 1GHz, but have a few GNU/Linux related questions. So I would be happy If someone who has this TiBook could give me some answeres ... As far as I know - Powermanagement does work with latest Benh Kernels (suspend) - XFree86 work's but without 3D Accelration - Sound works right? Do this components work? - PCMCIA Slot? (with pcmcia-cs? because of orinoco-cs monitor patch) - Modem? (heard that there is an closed source driver) How long can you work with your powerbook on battery power? Yes, i know, this depends on what you do with the Powerbook, right. But what are your experiences? - on normal working (vi, ssh, email, web, irc, etc.) - and on heavy cpu using (compiling, etc.) This is my most important question because I have an Pismo and could live with the slow cpu of the G3, but not with intel-like on-battery times :-/ And how often do you hear the fan? how hot will it get? is there a problem like the "toasted ibooks in sleep-mode"? ;) Regards, Michael
