Hello list,
I had a panic on a GENERIC.MP 4.3, here are the interesting lines in the
dmesg and the full dmesg follows:
uvm_fault(0xd07d3c40, 0xde98b000, 0, 1) -> e
fatal page fault (6) in supervisor mode
trap type 6 code 0 eip d04852a2 cs 8 eflags 10247 cr2 de98b000 cpl 0
panic: trap type 6, c
Dear Friedrich,
We offer dedicated servers at ipv4.net
If you are interested let me know
Regards,
Marcos Laufer
Francisco Valladolid Hdez. wrote:
> Hi
>
> Consider www.geekisp.com I have a account with Dave for almost, three years
> without problems.
>
> www.rootr.net can
Insan, (or anyone who might know) do you know if x3350 will work with
OpenBSD, or it will not work due to
the raid controller not being supported just like with x3650?
Does anyone tried to install OpenBSD on IBM x3350 machines?
What about x3550 ?
Regards,
Marcos Laufer
Insan Praja SW
Ricardo,
Yo supongo que te va a funcionar, si llegas a tener la posibilidad de
probarlo decime como te fue!
Saludos,
Marcos
Ricardo Augusto de Souza escribis:
Hi,
I have an IBM 3550 with SAS disks and Adaptec ServeRAID 8k controller
and I AM NOT able to install openBSD on it.
Installatio
Marcello ,
If you don't mind, i'd like to know more info or what to read to
acomplish your first scenario:
PC -- Internet -- OpenBSD LAN
PC IPSec Tunnel -- LAN
Thanks!
Marcos Laufer
Marcello Cruz escribiC3:
Toni,
Do you mean a VPN wh
Hello, i'd like to inform a problem when dettaching an external 1TB USB
disk drive , the system just freezes, i can't type anything. Also It
stops responding to ping.
If i don't unplug it then i can use the disk normally, i can copy and
delete files with no problem. But as soon as i unplug the U
Kenneth R Westerback wrote:
> On Wed, Nov 14, 2012 at 04:22:20PM -0300, Marcos Laufer wrote:
>
>> Hello, i'd like to inform a problem when dettaching an external 1TB
>> USB disk drive , the system just freezes, i can't type anything.
>> Also It stops respondin
Kevin Chadwick wrote:
> On Thu, 15 Nov 2012 07:45:40 -0300
> Marcos Ariel Laufer wrote:
>
>
>> I've been using OpenBSD since 2.6, this never happened to me with any
>> other USB hard disks. This one in particular i bought it a couple of
>> days ago.
>>
>
> I wonder if it freezes other OS
Paul de Weerd wrote:
On Thu, Nov 15, 2012 at 04:18:14PM +0100, Otto Moerbeek wrote:
| > I have no problems whatsoever (mounting, umounting, using the disks,
| > etc) with mine:
|
| Did you also try unplugging it? If that works and since the OP did not
| state the newest version he tried this on
Kenneth R Westerback wrote:
> On Thu, Nov 15, 2012 at 12:48:03PM -0300, Marcos Laufer wrote:
>
>> Kenneth R Westerback wrote:
>>
>>> On Wed, Nov 14, 2012 at 04:22:20PM -0300, Marcos Laufer wrote:
>>>
>>>> Hello, i'd like to info
Marcos Ariel Laufer wrote:
On 11/18/2012 12:35 PM, Paul de Weerd wrote:
On Thu, Nov 15, 2012 at 01:04:02PM -0300, Marcos Laufer wrote:
| >I did this quite often a couple of weeks ago. Haven't tried for a
| >while (no need) and have upgraded to newer snaps a bunch of times
| >s
Peter Hessler wrote:
On 2012 Nov 20 (Tue) at 12:45:09 -0300 (-0300), Marcos Laufer wrote:
:Ok , i've just tried it on a OpenBSD 5.1 and unplugging the USB works
:just fine, no crash, no freeze.
:
:The weird thing and i don't understand why, is that you guys had good
:results with o
This is a DL360G3 running OpenBSD 5.2 . I can't use a "WD My Passport"
USB disk, i get input/output error, here is what i got:
# dmesg
OpenBSD 5.2 (GENERIC) #0: Fri Dec 14 23:58:18 ART 2012
root@:/u/system/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel"
Kenneth R Westerback wrote:
> On Wed, Dec 19, 2012 at 05:23:55PM -0300, Marcos Laufer wrote:
>
>> This is a DL360G3 running OpenBSD 5.2 . I can't use a "WD My Passport"
>> USB disk, i get input/output error, here is what i got:
>>
>> # dmesg
>
Marcello if you like that Series of Intel motherboards, i can assure you
that D945GCPE works just fine:
OpenBSD 4.2-stable (GENERIC) #0: Fri Mar 28 15:20:03 ART 2008
root@<:/u/system/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("Genui
This is a very interesting subject.
Is there any official paper describing how to tune TCP on OpenBSD?
Googling i found this two interesting links, but none specifically
mentions OpenBSD:
Enabling high performance data transfers
http://www.psc.edu/networking/projects/tcptune/
TCP tuning cookbo
Hi there,
Is there any How-To on a way of making the mailgraph package work with
the chrooted Apache?
Regards,
ks in advance for your help
Regards,
Marcos Laufer
Edd ,
This are the permissions:
hq:/{19}# ls -al |grep mnt
drwxr-xr-x 2 root wheel 512 Nov 3 2008 mnt/
hq:/{20}#
I am mounting this as root .
I also added -root=0 to /etc/exports , still same behavior
Regards,
Marcos Laufer
Edd Barrett escribis:
> On Mon, Jul 06, 2009 at 04:40:3
hq:/{114}#
Johan Torin escribis:
> On Monday 06 July 2009, Marcos Laufer wrote:
>
>> Hello list ,
>>
>> I am having trouble to make NFS work properly. I don't know what i am
>> doing wrong, maybe
>> someone can enlighten me.
>>
>>
&
s: a-l: No such file or directory
backup:/u/data{4}# ls -al|grep export
drwxr-xr-x 2 root wheel 512 Jul 6 21:29 export/
backup:/u/data{5}#
Jan Stary escribis:
> On Jul 06 16:40:31, Marcos Laufer wrote:
>
>> Hello list ,
>>
>> I am having trouble to make NFS wor
I was told by a little bird on this list to set the -root=0 option,
maybe little bird meant -maproot=0 :)
And yes, i HUPed.
But it's all working now, the magic was to add the missing line to fstab.
Thanks everybody for your tips and help on this
Regards,
Marcos Laufer
Jan Stary esc
q 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
Marcos Laufer
* marcos <mailto:mar...@ipversion4.com>@ipversion4.com
<mailto:mar...@ipversion4.com>
CTO
Ipversion4.com
http://www.ipversion4.com <http://www.ipversion4.com/>
( 0800-444-HOSTING
Rodriguez Peqa 468 1 C
Sorry for the noise . I was misconfiguring the horiz sync
Marcos Laufer wrote:
Hello List,
I upgraded my workstation from 4.4 to 4.5 and i lost the 1280x1024
resolution
in X. I had the i810(4) driver which has been removed/replaced with the
intel(4)
driver. Which other driver should i
Hello list ,
I can see that the php5-pear package is missing in 4.2. How is it supposed to
be installed now?
Thanks!
Marcos
My opinion is that more money should be raised in order to
keep -stable up to date.
I think it's important to mantain a stable distribution, it's one
of the things that give openbsd it's fame of being solid rock
Marcos
- Original Message -
From: "Antoine Jacoutot" <[EMAIL PROTECTED]>
To:
0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
umass0 at uhub0 port 5 configuration 1 interface 0 "USB Audio Player" rev
2.00/0.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd1 at scsibus1 targ 1 lun 0: <, Audio Player, \\001> SCSI0 0/direct
removable
sd1: 968MB, 123 cyl, 255 head, 63 sec, 512 bytes/sec, 1984000 sec total
Regards,
Marcos Laufer
I'm sure i installed the install42.iso from december 6th , maybe there was
something wrong
on that image?
I'll try burning the newest one
Thanks!
- Original Message -
From: "Jason George" <[EMAIL PROTECTED]>
To:
Sent: Thursday, December 13, 2007 8:42 PM
Subject: Re: Intel DQ35MP
>He
I think the newest install42.iso is also wrong.
I open the .iso and the files inside have old dates (november 20 2007, and
november 13
2007)
I'll make my own .iso with the rest of the files from the i386 snapshot
directory
Regards,
- Original Message -
From: "Marcos Laufe
0,0,de3f7000,d0915334) at mainbus_attach+0x3d
RUN AT LEAST ...
Regards,
Marcos
- Original Message -
From: "Pierre Riteau" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, December 13, 2007 8:55 PM
Subject: Re: Intel DQ35MP
e 2 at 0xffc0 for 4096KB
Low ram: 634KB High ram: 1015580KB
Total free memory: 1016218KB
Atentamente, Marcos Laufer Marcos Laufer - IPversion4.com * [EMAIL PROTECTED]
http://www.ipversion4.com ( 0800-444-HOSTING Rodriguez Peqa 468 1 C
- Original Message -
From: <[EMAIL PROTECTE
Hello Evgeniy,
You can try this how-to, this might work for you:
Solution for ZendOptimizer to work under OpenBSD 4.1/i386
1. Download the file for OpenBSD 3.x as distributed by Zend
currently ZendOptimizer-3.2.8-openbsd3.4-i386.tar.gz
2. Untar (tar -xzf ZendOpt*), and fetch the files
-> ZendOpt
apache, so what would be a solution for this problem?
Anybody else expiriencing this rare problems?
Regards,
Marcos Laufer
- Original Message -
From: "Andrew Pantyukhin" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, No
/soft/tepatche/index.html
Regards,
Marcos Laufer
- Original Message -
From: "Tasmanian Devil" <[EMAIL PROTECTED]>
To: "OpenBSD"
Sent: Friday, January 05, 2007 5:42 AM
Subject: Re: moving kernels between machines
> - Machine A, a single i386 box without enough
k ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
Regards,
Marcos Laufer
0 1 1 0 8
0
plimitpl 152 1300 46 4 0 4 4 0 8
0
inpcbpl 216 22530 198915 01515 0 8
0
In use 15266K, total allocated 19696K; utilization 77.5%
#
I still have the bsd.1 and bsd.1.core files just in
Checck www.ipv4domains.com out , donates to OpenBSD monthly, small company
but big expectations !
Bye!
- Original Message -
From: "Jean-Daniel Beaubien" <[EMAIL PROTECTED]>
To:
Sent: Sunday, January 14, 2007 5:41 PM
Subject: Friendly registrar
Hi everyone,
I'm about to purchase a dom
Would you mind sharing your final config as sample for others
who might need in the future?
Thanks!
- Original Message -
From: "S t i n g r a y" <[EMAIL PROTECTED]>
To: "Open BSD"
Sent: Thursday, January 25, 2007 12:51 PM
Subject: multiple external links working .. (Solved)
Yes it was
Maybe you just have to wait a couple of weeks/months, here's an extract from
VirtualBox website:
OpenBSD 4.0 might not work well, a fix will be in the next version
of VirtualBox. No Guest Additions available yet.
Regards.
Marcos Laufer
---
www.ipv4networks.com InternetWorking Solu
I'd like to get the 4.1 preorder and a Tshirt, but i cant find how
to pay with paypal. Is this possible?
Regards,
Marcos Laufer
- Original Message -
From: "Kian Mohageri" <[EMAIL PROTECTED]>
To: "Darrin Chandler" <[EMAIL PROTECTED]>
Cc:
Sent: Monda
release.
So i installed the xbase41.tgz of the release over the snapshot
installation, and i could install gd smoothly.
Now i just have to move on to stable and i'm ready to go!
Thanks !
Marcos Laufer
- Original Message -
From: "Rob Waite" <[EMAIL PROTECTED]>
To:
Se
Daniel,
Try the same test with this changes
Timeout 60
KeepAlive Off
If my guess is right, you'll notice big improvement.
Tell me how it goes
Marcos Laufer
- Original Message -
From: "Daniel Ouellet" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, May 09, 200
x27;t like to have a production server running -current
Has anyone sorted this out?
Marcos
- Original Message -
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: "Rob Waite" <[EMAIL PROTECTED]>;
Sent: Wednesday, May 09, 2007 2:30 PM
Subject: Re: OpenBSD 4.1 ins
inal Message -
From: "Ben Calvert" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Sent: Friday, May 11, 2007 12:33 AM
Subject: Re: OpenBSD 4.1 install issue??
On May 10, 2007, at 7:25 PM, Marcos Laufer wrote:
> I upgraded to stable , rebooted w
Rob ,
raising VM_PHYSSEG_MAX to 16 did the trick. I'm running stable 4.1 now.
Thanks a lot for the sound advice !
Regards,
Marcos Laufer
- Original Message -
From: "Rob Waite" <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 12, 2007 1:04 PM
Subject: Re: OpenBSD 4.1
Hello ,
Has anyone had luck in making ImageMagick work into the www chroot
environment?
Some web applications need to use the 'convert' system command, so i
included it
into the /var/www/bin/ directory and also every file that gets mentioned
when you
run : ldd convert , into it's corresponding dir
s ,
Marcos
- Original Message -
From: "Aiko Barz" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, May 17, 2007 2:51 PM
Subject: Re: ImageMagick and chroot
: <[EMAIL PROTECTED]>
Marcos Laufer wrote:
> Hello ,
>
> Ha
Hello,
I am testing pf in an OpenBSD 4.1. This same configuration works fine on
OpenBSD 3.9, but in 4.1 it is not filtering anything, everything is passing
thru,
just like as if there was no 'block all'. What worries me most is that
anyone
on the outside can see my ssh service .
Is there anything
e tips and advice
Marcos
- Original Message -
From: "Peter N. M. Hansteen" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, May 22, 2007 8:23 AM
Subject: Re: OpenBSD 4.1: pf is not blocking anything
"Marcos Laufer"
Hello there,
I don't know if this has been asked or discussed before,..
here's no mysql4 packages in OpenBSD 4.1 . Why?
Regards,
Marcos
- Original Message -
From: "Daniel Ouellet" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, June 05, 2007 11:46 PM
Subject: Re: mysql4
Marcos Laufer wrote:
> Hello there,
>
> I don't know if this has been asked or discussed before,..
> here's no mysql4 packages i
Will ,
PPPoE needs a MTU of 1492 , i had the same problem with other values
Give it a try.
Marcos
- Original Message -
From: "Will Jenkins" <[EMAIL PROTECTED]>
To:
Sent: Friday, June 08, 2007 9:49 PM
Subject: Re: PPPoE MTU Problem
On 9 Jun 2007, at 00:11, Stuart Henderson wrote:
>
Hi there,
I'm trying to install the newest clamav (0.90.3) on OpenBSD 3.9 . I updated
the
sources, and managed to compile it . But when i try to install the package i
get this error:
pkg_add /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz
Can't install /usr/ports/packages/i386/all/clamav-0.90.3
kage, but not tagged with @lib ?
(check with pkg_info -K -L)
If you are still running 3.6 packages, update them.
test:/usr/ports/security/clamav{96}#
- Original Message -
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To:
Sent: Thursday, June 28, 2007 3:56 PM
Subject: clamav on 3.
I just worked it out, sorry for the noise !
Just had to compile clamav again with the newest curl installed , and the
resulting clamav package worked just fine.
- Original Message -
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To:
Sent: Thursday, June 28, 2007 4:1
Daniel ,
How about Cacti? . Have you succesfully installed with mysql5?
Has ayone?
I'm having all kind of troubles to make it work on mysql5, and
all recomendations go back to install mysql4
Regards,
- Original Message -
From: "Daniel Ouellet" <[EMAIL PROTECTED]&g
I've been seeing this since OpenBSD 3.4 with Uebimiau php webmail and
sometimes httpd stops working, restarting is needed.
- Original Message -
From: "Joachim Schipper" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, July 11, 2007 10:28 AM
Subject: Re: apache + php
On Wed, Jul 11, 2007 at 12:
I am having a very strange problem on a 3.9 , suddenly i can't access any
table
on the databases. I have around 100 databases on this server and can't access
not even one. This is a production server and i am in an urge to solve it, if
anyone
can help i would appreciate it:
# mysql mysql -p
Enter
Maybe i need to increase something else?
Thanks!
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Friday, July 13, 2007 3:12 AM
Subject: Re: mysql problem
On Fri, 13 Jul 2007, Marcos Lau
t|stop]" && exit 1
exec /usr/local/share/mysql/mysql.server $1 > /dev/null 2>&1
--
and in mysql.server it says:
# Set some defaults
pid_file=
server_pid_file=
use_mysqld_safe=1
user=_mysql
What do you think, should i add more openfiles to mysql?
Regards,
Marcos
Hello,
I want to report a problem i experienced while testing OpenBSD 4.1 .
I've installed it, increased VM_PHYSSEG_MAX to 16
in /usr/src/sys/arch/i386/include/vmparam.h to make
it work with this particular motherboard and made a
stable release.
Installed a server with it and it's working fine as
t; <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: "Otto Moerbeek" <[EMAIL PROTECTED]>;
Sent: Friday, July 13, 2007 1:54 PM
Subject: Re: mysql problem
You are setting the user, not the login class.
You have made a login class _mysql in /et
I will start it as you say .
I will let you know it it worked
Thanks !
Marcos
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: "Bob Beck" <[EMAIL PROTECTED]>;
Sent: Friday, July
8: W83627THF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ebfd netmask effd ttymask
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
- Original Message -
From: "Otto Moerbeek&quo
ystem?
Regards,
Marcos
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Friday, July 13, 2007 4:46 PM
Subject: Re: fsck Segmentation fault on 4.1
On Fri, 13 Jul 2007, Marcos Laufer wrote:
>
-p
Now what?
Regards,
Marcos
- Original Message -
From: "Clint Pachl" <[EMAIL PROTECTED]>
Cc: "Marcos Laufer" <[EMAIL PROTECTED]>;
Sent: Friday, July 13, 2007 6:05 PM
Subject: Re: mysql problem
Otto Moerbeek wrote:
> On Fri, 13 Jul 2007, Marcos Laufer w
Ok , i had followed the instructions at http://openbsdsupport.org/mysql.htm
And now i have this configuration:
I start mysql with this script:
# cat /usr/local/bin/mysql.start
if [ -x /usr/local/bin/mysqld_safe ] ; then
su -c _mysql root -c '/usr/local/bin/mysqld_safe &' > /dev/null &
echo -
afe which wouldn't let me open more
that 2048 files despite of what i configured in my.cnf.
Regards,
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: ; <[EMAIL PROTECTED]>; "Daniel Oue
> You didn't read it and you didn't pay attention to statement in bold
> either. I could tell you what to do to fix it, but then you wouldn't
> learn from it. If it wasn't explain there, I would be happy to tell you,
> but it is there and pretty clear as well.
Daniel ,
When i post a message on the
Will this be moved to -stable, or is it an uncommon thing ?
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, July 19, 2007 3:09 PM
Subject: Re: fsck Segmentation fault on 4.1
On
arcos
- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Friday, July 20, 2007 4:02 PM
Subject: Re: fsck Segmentation fault on 4.1
On Fri, 20 Jul 2007, Marcos Laufer wrote:
> Will this b
INOPB(&sblock));
sblock.fs_inopb = sblock.fs_bsize / sizeof(struct
ufs1_dinode);
--
Will this work?
Regards,
Marcos
----- Original Message -
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc:
Sent: Frid
So the patch works, and this problem seems serious and easy to encounter, i
vote for moving it to stable.
- Original Message -
From: "Tobias Ulmer" <[EMAIL PROTECTED]>
To: "Otto Moerbeek" <[EMAIL PROTECTED]>
Cc:
Sent: Friday, August 03, 2007 3:37 PM
Subject: Re: fsck Segmentation fault o
Hello list,
I installed the latest snapshot on an Intel D945GCcr mobo
which supports SATA-300 (sata2) , plugged in some hard
disks, all of them Western Digital WD3200AAKS,
wich according to WD website those work at 300 mb/s.
(http://www.westerndigital.com/sp/products/products.asp?driveid=299&langu
response, maybe someone
can assist the people at the Cshop so they can sell properly.
Or maybe someone else should be in charge of selling internationally.
Thanks
Marcos
- Original Message -
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: "OpenBSD Orders" <[EMAI
ginal Message -
From: "L. V. Lammert" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: "OpenBSD Orders" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
Sent: Wednesday, October 10, 2007 11:37 AM
Subject: Re: OpenBSD is loosing cd
Just put this line in your /etc/profile :
TMOUT=900
So after a while noone clicks anything, it will logout automatically and
nobody will
have access to your server without knowing the root password .
---
Departamento de Soporte Tecnico
www.ipv4networks.com InternetWorking Solutions
Av. Dr. Honor
Hi there too,
I am having the exact same error, buy my ichiic0 is "Intel 82801FB SMBus"
and i have only one processor. Note that my kernel is GENERIC, not
GENERIC.MP .
I've also tried disabling hyperthreading at the bios, but the errors still
show up.
Regards,
Marcos Laufer
Oh, h
problems are related to threads librarys on OpenBSD only?
Other OSes do not have such issues?
Regards,
Marcos Laufer
- Original Message -
From: "Edgars" <[EMAIL PROTECTED]>
To: "Toni Mueller" <[EMAIL PROTECTED]>
Cc:
Sent: Thursday, September 07, 2006 8:57 AM
Take a look at www.mybboard.com
- Original Message -
From: "Michael Schmidt" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, September 12, 2006 8:13 AM
Subject: Forum-Software, good and secure, on OpenBSD systems?
Hello,
which experiences or what knowledge are/is available concerning good and
Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
dmesg (SAS hard disks are not recognized)
OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) MV CPU 3.20GHz ("GenuineIntel" 686-clas
r the documentation
you need.
Regards,
Marcos Laufer
Jonathan Gray wrote:
> On Tue, Oct 07, 2008 at 06:26:23PM -0200, Marcos Laufer wrote:
>
>> Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
>> dmesg (SAS hard disks are not recognized)
>>
>>
>> &
I'm pretty sure that my email won't change a thing about Adaptec's way
of thinking. But it is the right thing to do, i must send them that
email with my
point of view and needs as a user of Adaptec's products.
I will also let IBM know about this.
Theo de Raadt wrote:
>> I am writing an email to A
ntroller is not supported at all in the aac driver?
Regards,
Marcos Laufer
Jonathan Gray wrote:
> On Tue, Oct 07, 2008 at 06:26:23PM -0200, Marcos Laufer wrote:
>
>> Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
>> dmesg (SAS hard disks are not recognized)
Hello list,
I can't find redhat_base in the 4.4 packages .
Has it been discontinued?
Regards,
Marcos Laufer
ent
via
paypal with my paypal account.
Regards,
Marcos Laufer - IPversion4.com
* [EMAIL PROTECTED]
http://www.ipversion4.com
( 0800-444-HOSTING
Rodriguez Peqa 468 1 C
Well , php5-sybase_ct does not enable the same functions, for instance
the mysql_init() function is not there. That function would allow you to
use stored procedures from the ms db .
Does anyone know how to generate a mssql.so with this functions included?
Regards,
Marcos Laufer
--
List
hould divide those numbers by three, 1 u$s = 3.00 pesos$
Let me know if i can help with someting
Regards,
Marcos Laufer
- Original Message -
From: "Gilles Chehade" <[EMAIL PROTECTED]>
To:
Sent: Saturday, September 16, 2006 8:52 PM
Subject: OpenBSD dedicated hosting
Hi
if(lo0),
mbuf,
sensor(9),
proc(httpd),
proc(smtpd),
if(xl0),
io1(wd0)
}
datadir "/var/www/symon/rrds/srv3"
}
Best Regards,
Marcos Laufer
Marco , that did it!
It worked just by increasing this two:
kern.seminfo.semmni=256
kern.seminfo.semmns=2048
I'm copying to the list in order others can benefit from
this too.
Thanks a lot !
Marcos Laufer
- Original Message -
From: "Marco Pfatschbacher" <[EM
isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
npx0 at isa0 port 0xf0/16: using exception 16
biomask c000 netmask c000 ttymask c002
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Best Regards,
Marcos Laufer
using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ef6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Marcos Laufer
0 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd
Thanks Matthew , you are correct.
I also realized i did not install X sets after sending my email, i am
installin all X sets, but i guess those libs probably are on xfont48.tgz
Matthew Weigel wrote:
On Thu, 30 Jun 2011 20:50:20 -0300, Marcos Laufer wrote:
Hello list, i can't in
Hello list, i am having strange issues with openbsd 4.8 and cron .
This is a OpenBSD 4.8 with it's kernel modified to have pci.c rev 1.72 ,
in order to make it run on a IBM x336 server.
Everything was working perfect. Until i added today a new user. Then i
used vipw to change it's group.
After
Regards,
Marcos Laufer wrote:
Hello list, i am having strange issues with openbsd 4.8 and cron .
This is a OpenBSD 4.8 with it's kernel modified to have pci.c rev 1.72
, in order to make it run on a IBM x336 server.
Everything was working perfect. Until i added today a new user. Then i
used
t
Jul 19 16:00:14 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 16:00:50 srv last message repeated 15 times
Jul 19 16:02:51 srv last message repeated 62 times
Jul 19 16:05:05 srv last message repeated 57 times
Marcos Laufer wrote:
I noticed that this was sent by email by cron
ttp://playr.co.uk/
>
Then what you need is exactly mod_throttle.
mod_throttle project is discontinued but the latest version works just
fine and does it job very well.
I use it with stock Apache since OpenBSD 3.4 and never had problems with it.
Regards,
Marcos Laufer
* marcos <mai
Daniel,
What i did to make my x336 servers work with OpenBSD 4.9 was to replace
pci.c from the source with pci.c 1.72 .
Is this somehow wrong? Should i apply this patch instead?
Regards,
Marcos
LEVAI Daniel wrote:
> Hi!
>
>
> (Just for the record)
> Regarding PR#6523, OpenBSD 4.9 works with
I am sorry, this confused me, and i didn't quite understand.
Just to be clear:
ddb.panic=0 will boot instead of dropping you into a ddb?
Or is it ddb.panic=1 the option that will make the system boot?
Regards,
David Coppa wrote:
> On Wed, 22 Jun 2011, ter Voorde Informatiesystemen wrote:
>
>
1 - 100 of 122 matches
Mail list logo
