This is a multi-part message in MIME format. --------------080600000004080602050907 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit
Sorry, for the delay, our release and the www.linux-kongress.de needed to much time. But now I tested the Epson Perfection 1260. In terms of the rating of linuxprinting.org (http://www.linuxprinting.org/database.html) I would say it works "Mostly". Scanning of normal paper documents works, but the transparency light is not recognized. I have connected the transparency light to the scanner, plugged the power and USB in, and then I loaded the USB scanner module with modprobe scanner vendor=0x04b8 product=0x011d edited /etc/sane.d/dll.conf to only contain one line "plustek". In the /etc/sane.d/plustek.conf I added vendor and product ID to the "[usb]" line, set "enableTPA 1" and left all the rest at its default velues. Both "xscanimage" and "xsane" do not show a button to switch to the transparencty unit. Also not under "Advanced options". Kooka has a button for that, but at the button there is a warning that the choices do not necessarily all work and when I choose transparency there, the scanner stillscans with the internal light for normal paper. I use SANE 1.0.9pre1 (source from SANE home page, both frontends and backends) on a Mandrake 9.0 machine. I have attached the debug output (level 12, the maximum as described on http://www.gjaeger.de/scanner/usb/Plustek-USB.txt) of "scanimage -L".\ Till G. Jaeger wrote: > So go to the download page at > http://www.gjaeger.de/scanner/plustek.html > and fetch the latest 0.43-7 tar-ball and replace all the backend-stuff > from the 1.0.8 with the ones from the tarball. Then replace the > tar-balls plustek-devs.c by the one I've sent you... > The other way is to use the latest CVS-Sane stuff... > > Hope this helps so far > Gerhard > > --------------080600000004080602050907 Content-Type: text/plain; name="debug.out" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="debug.out" [sanei_debug] Setting debug level of dll to 12. [dll] sane_init: SANE dll backend version 1.0.6 from sane-backends-1.0.9-pre1 [dll] add_backend: adding backend `plustek' [dll] load: searching backend `plustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [sanei_debug] Setting debug level of plustek to 12. [plustek] sane_init: sane-backends 1.0.9-pre1 [plustek] sane_init, ># Plustek-SANE Backend configuration file< [plustek] sane_init, ># For use with Plustek parallel-port scanners and< [plustek] sane_init, ># LM9831/2/3 based USB scanners< [plustek] sane_init, >#< [plustek] sane_init, ># For parport devices use the parport section< [plustek] sane_init, >#< [plustek] sane_init, >[parport]< [plustek] next device is a PARPORT device [plustek] sane_init, >#device /dev/pt_drv< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># leave the default values as specified in /etc/modules.conf< [plustek] sane_init, >#< [plustek] sane_init, >#option warmup -1< [plustek] sane_init, >#option lOffOnEnd -1< [plustek] sane_init, >#option lampOff -1< [plustek] sane_init, >< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># The USB section:< [plustek] sane_init, ># each device needs at least two lines:< [plustek] sane_init, ># - [usb] vendor-ID and product-ID< [plustek] sane_init, ># - device devicename< [plustek] sane_init, ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] sane_init, ># [usb] 0x07B3 0x0017< [plustek] sane_init, ># device /dev/usbscanner< [plustek] sane_init, >#< [plustek] sane_init, ># additionally you can specify some options< [plustek] sane_init, ># warmup, lOffOnEnd, lampOff< [plustek] sane_init, >#< [plustek] sane_init, ># For autodetection use< [plustek] sane_init, ># [usb]< [plustek] sane_init, ># device /dev/usb/scanner0< [plustek] sane_init, >#< [plustek] sane_init, ># NOTE: autodetection is safe, as it uses the info it got< [plustek] sane_init, ># from the USB subsystem. If you're not using the< [plustek] sane_init, ># autodetection, you MUST have attached that device< [plustek] sane_init, ># at your USB-port, that you have specified...< [plustek] sane_init, >#< [plustek] sane_init, >< [plustek] sane_init, >[usb] 0x04B8 0x011D< [plustek] next device is a USB device (0x04B8-0x011D) [plustek] next device is an USB device [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># options for the previous USB entry< [plustek] sane_init, >#< [plustek] sane_init, ># switch lamp off after xxx secs, 0 disables the feature< [plustek] sane_init, >option lampOff 0< [plustek] Decoding option >lampOff< [plustek] sane_init, >< [plustek] sane_init, ># warmup period in seconds, 0 means no warmup< [plustek] sane_init, >option warmup 30< [plustek] Decoding option >warmup< [plustek] sane_init, >< [plustek] sane_init, ># 0 means leave lamp-status untouched, not 0 means switch off< [plustek] sane_init, ># on sane_close< [plustek] sane_init, >option lOffOnEnd 0< [plustek] Decoding option >lOffOnEnd< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># options to tweak the image start-position< [plustek] sane_init, ># (WARNING: there's no internal range check!!!)< [plustek] sane_init, >#< [plustek] sane_init, ># for the normal scan area< [plustek] sane_init, >#< [plustek] sane_init, >option posOffX 0< [plustek] Decoding option >posOffX< [plustek] sane_init, >option posOffY 0< [plustek] Decoding option >posOffY< [plustek] sane_init, >< [plustek] sane_init, ># for transparencies< [plustek] sane_init, >option tpaOffX 0< [plustek] Decoding option >tpaOffX< [plustek] sane_init, >option tpaOffY 0< [plustek] Decoding option >tpaOffY< [plustek] sane_init, >< [plustek] sane_init, ># for negatives< [plustek] sane_init, >option negOffX 0< [plustek] Decoding option >negOffX< [plustek] sane_init, >option negOffY 0< [plustek] Decoding option >negOffY< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># for adjusting the default gamma values< [plustek] sane_init, ># use values of 2.5 for CanoScan< [plustek] sane_init, >#< [plustek] sane_init, >option redGamma 1.0< [plustek] Decoding option >redGamma< [plustek] sane_init, >option greenGamma 1.0< [plustek] Decoding option >greenGamma< [plustek] sane_init, >option blueGamma 1.0< [plustek] Decoding option >blueGamma< [plustek] sane_init, >option grayGamma 1.0< [plustek] Decoding option >grayGamma< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># to enable TPA (non Plustek devices only)< [plustek] sane_init, ># 0 means default behaviour as specified in the internal tables< [plustek] sane_init, ># 1 means enable< [plustek] sane_init, >#< [plustek] sane_init, >enableTPA 1< [plustek] ignoring >enableTPA 1< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># and of course the device-name< [plustek] sane_init, >#< [plustek] sane_init, >device /dev/usb/scanner0< [plustek] Decoding device name >/dev/usb/scanner0< [plustek] sane_init, >< [plustek] sane_init, >#< [plustek] sane_init, ># to define a new device, start with a new section:< [plustek] sane_init, ># [usb] or [parport]< [plustek] sane_init, >#< [plustek] attach (/dev/usb/scanner0, 0xbfffd320, (nil)) [plustek] Device configuration: [plustek] device name : >/dev/usb/scanner0< [plustek] porttype : 1 [plustek] USB-ID : >0x04B8-0x011D< [plustek] warmup : 30s [plustek] lampOff : 0 [plustek] lampOffOnEnd : 0 [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] drvopen() [plustek] usbDev_open(/dev/usb/scanner0,0x04B8-0x011D) [plustek] Vendor ID=0x04B8, Product ID=0x011D [plustek] usbio_DetectLM983x [plustek] usbio_DetectLM983x: found LM9832/3 [plustek] Device description for >0x04B8-0x011D< found. [plustek] usb_initDev(32,0x04b8) [plustek] Vendor adjusted to: >Epson< [plustek] REG[0x5b] = 0x94 (msk=0x80) [plustek] LAMP-STATUS: 0x00000001 [plustek] RESETTING REGISTERS [plustek] usb_SetScanParameters() [plustek] HDPI: 8.000 [plustek] DataPixelStart=69, LineEnd=69 [plustek] Full Steps to Skip at Start = 0x0000 [plustek] usb_GetMCLKDivider() [plustek] Integration Time Adjust = 0 (HDPI=8.000,MCLKD=4.000) [plustek] Current MCLK Divider = 4.000000 [plustek] PC-Rate mclkdiv=1.000000 [plustek] MOTOR-Settings: PWM=0x01, PWM_DUTY=0x30 [plustek] PL=295, coeffsize=216, scaler=1 [plustek] PauseLimit = 295, [0x4e] = 0x91, [0x4f] = 0x01 [plustek] usb_SetScanParameters() done. [plustek] usbDev_getCaps() [plustek] usbDev_getLensInfo() [plustek] wMAX=19200, WPHYMAX=2400 [plustek] Scanner information: [plustek] Model : Perfection 1260 [plustek] Asic : 0x42 [plustek] Flags : 0x00000206 [plustek] Version: 0x00000000 [plustek] drvclose() [plustek] usbDev_stopScan(mode=0) [plustek] usbDev_ScanEnd(), start=0, park=0 [plustek] usbDev_close() [plustek] attach: model = >Perfection 1260< [dll] init: backend `plustek' is version 1.0.0 [plustek] sane_get_devices (0xbffff3f8, 0) [dll] sane_exit: exiting [dll] sane_exit: calling backend `plustek's exit function [plustek] sane_exit [plustek] Shutdown called (dev->fd=-1, /dev/usb/scanner0) [plustek] Waiting for scanner-ready... [plustek] Lamp-Timer stopped [dll] sane_exit: finished device `plustek:/dev/usb/scanner0' is a Epson Perfection 1260 USB flatbed scanner --------------080600000004080602050907--
