I don't know either ;) I am still fairly new to networking....sorta
Anyway, I have never have to change that one myself it's alway been .255
Maybe it has to do with your network class..C Probably is come to think of
it.
hmmm, this is strange!
What type of cable are you using? Maybe there is something wrong with that.
Try new cables and go through the hub.
Dan
At 10:10 PM 3/31/98 -0800, [EMAIL PROTECTED] wrote:
>Okay, I've checked that. Everything looks fine, but I'm not sure what
>BROADCAST is...???
>
>
>
>
>
>[EMAIL PROTECTED]
>03/31/98 10:09 PM
>
>
>Please respond to [EMAIL PROTECTED]
>
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>cc: (bcc: Joe Ferguson)
>Subject: Re: Just can't connect (was: sendmail hangs...)
>
>
>
>
>
>It really is starting to sound like you didn't setup networking during your
>install.
>/etc/sysconfig/network-scripts/ifcfg-eth0
>eg.
>DEVICE=eth0
>IPADDR=192.168.0.2
>NETMASK=255.255.255.0
>NETWORK=192.168.0.0
>BROADCAST=192.168.0.255
>ONBOOT=yes
>Pay special attention to your NETMASK
>You 'should' be able to ping your router if your on the same
>subnet....NETWORK. That asumes your using proper cabling. BNC is the easest
>to test with as RJ45 requires a special pinout for a direct connection.
>pin 3 to 1 and pin 2 to 6, the rest straight through.
>
>Dan
>
>At 09:51 PM 3/31/98 -0800, [EMAIL PROTECTED] wrote:
>>So far, everything I know to check, and everything I've been told to
>check,
>>have been correct. I don't know what else to do...
>>
>>I can ping myself @ 127.0.0.1 AND my IP, but that's it. I can't ping my
>>router, or anything else. I've swapped ports on the hub, bypassed the hub
>>and connected directly to the router, and even swpped nics.
>>
>>I tell ya, I'm completely at a loss...
>>
>>Anyone have any more ideas I can try???
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
