That's strike one, I get two more.

On 1/22/2025 10:31 PM, John Blittersdorf via RE-wrenches wrote:
Christopher,
Update on the Transformer Humming.  Installed a new PSX-240 from Kirk and it is LOUDER than the T-240 that I took out. I have a call into the well driller to see if they have a record of the pump size or other details. When connected directly to the grid via transfer switch, still loud noise... same with battery only.  I did not check the 120VAC 30 amp break in the backed up loads sub panel. All other wiring was redone as I switched the pump directly to the grid until I received the new transformer and back to the inverter again. so all the connections were redone except the 120 breaker.

John


On Wed, Jan 22, 2025 at 10:30 AM Howie Michaelson via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:

    John,
    If you need a T240 (internal or external), I have a few used ones
    (and maybe a new one) in storage.
    Howie


    On Wed, Jan 22, 2025, 10:14 AM Christopher Warfel via RE-wrenches
    <re-wrenches@lists.re-wrenches.org> wrote:

        I could be a loose electrical or mechanical connection. It's been
        installed for a while and connections could have loosened up from
        expansion and contraction.

        On 1/18/2025 9:06 AM, John Blittersdorf via RE-wrenches wrote:
        > Hi Wrenches,
        >   I have a customer with an SW4024 installed in 2003 with
        the Trace
        > T220 transformer for
        > her well pump.  Recently it has started making a lot of
        noise when the
        > well pump comes on.
        > I checked the current on the well pump and it seems to be in
        the
        > normal range.  I have never had a transformer failure. Could
        this be a
        > failing transformer?
        >
        > Also, I have not been able to source a new one (Outback
        T240).  Are
        > there other brands
        > some of you may have used for a step up transformer?
        >
        > John Blittersdorf
        >
        > _______________________________________________
        > List sponsored by Redwood Alliance
        >
        > Pay optional member dues here: http://re-wrenches.org
        >
        > List Address: RE-wrenches@lists.re-wrenches.org
        >
        > Change listserver email address & settings:
        >
        http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
        >
        > There are two list archives for searching. When one doesn't
        work, try the other:
        > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
        >
        http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
        >
        > List rules & etiquette:
        > http://www.re-wrenches.org/etiquette.htm
        >
        > Check out or update participant bios:
        > http://www.members.re-wrenches.org
        >
-- Christopher Warfel, PE
        ENTECH Engineering, Inc.
        PO Box 871, Block Island, RI 02807
        (401) 447-5773

        _______________________________________________
        List sponsored by Redwood Alliance

        Pay optional member dues here: http://re-wrenches.org

        List Address: RE-wrenches@lists.re-wrenches.org

        Change listserver email address & settings:
        http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

        There are two list archives for searching. When one doesn't
        work, try the other:
        https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
        http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

        List rules & etiquette:
        http://www.re-wrenches.org/etiquette.htm

        Check out or update participant bios:
        http://www.members.re-wrenches.org

    _______________________________________________
    List sponsored by Redwood Alliance

    Pay optional member dues here: http://re-wrenches.org

    List Address: RE-wrenches@lists.re-wrenches.org

    Change listserver email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    There are two list archives for searching. When one doesn't work,
    try the other:
    https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    http://www.re-wrenches.org/etiquette.htm

    Check out or update participant bios:
    http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

--
Christopher Warfel, PE
ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
(401) 447-5773
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to