After doing research, it seems that the optimizers won't do what is
needed for the shading and orientation issues. The modules will be on
the east and west pitches of the roof. 

There is an existing array with a Midnite Solar Classic. There are 4
sub-arrays of 3 modules each , all facing due south  that act
independently. 

The new sub-array has more shading and orientation issues. We may need
to cut more trees, but would rather not. 

Although it seems radical for an off grid system., I'm considering
using microinverters, AC coupled to a Radian. Is this idea totally
crazy?

Thank you,

Drake 

----- Original Message -----
From: offgridso...@sti.net "RE-wrenches"
<re-wrenches@lists.re-wrenches.org>
To:<glenn.b...@glbcc.com>, "RE-wrenches"
<re-wrenches@lists.re-wrenches.org>
Cc:
Sent:Wed, 30 Oct 2019 16:11:20 -0700
Subject:Re: [RE-wrenches] Off Grid Optimizers

 Probably for shading! I cut the trees down to avoid all shading
offgrid. 

 Dave Angelini Offgrid Solar
 "we go where powerlines don't"
 http://members.sti.net/offgridsolar/
 e-mail offgridso...@sti.net
 text 209 813 0060

 On Wed, 30 Oct 2019 19:02:58 -0400, "Glenn Burt"
<glenn.b...@glbcc.com>
 wrote:
 > Then again, why optimizers?
 > Rapid shutdown MLPE exist without the complexity and cost of
optimizers,
 so
 > I too am perplexed.
 > 
 > Glenn
 > 
 > -----Original Message-----
 > From: RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> On
Behalf
 Of
 > William Miller
 > Sent: Wednesday, October 30, 2019 5:34 PM
 > To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
 > Subject: Re: [RE-wrenches] Off Grid Optimizers
 > 
 > I think I know this one: For rapid shutdown?
 > 
 > William
 > 
 > Miller Solar
 > 17395 Oak Road, Atascadero, CA 93422
 > 805-438-5600
 > www.millersolar.com
 > CA Lic. 773985
 > 
 > -----Original Message-----
 > From: RE-wrenches
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On
 > Behalf Of Allan Sindelar
 > Sent: Wednesday, October 30, 2019 2:11 PM
 > To: RE-wrenches
 > Subject: Re: [RE-wrenches] Off Grid Optimizers
 > 
 > Drake, I must be old school - why use optimizers?
 > Allan
 > 
 > 
 >> On Oct 30, 2019, at 1:00 PM, drake.chamber...@redwoodalliance.org
 wrote:
 >>
 >> Hello Wrenches,
 >>
 >> What is the best combination of charge controller and optimizer to
use
 > with an off grid, battery based system? What combinations are
 problematic?
 > 
 >>
 >> Thank you,
 >>
 >> Drake
 >> Athens Electric
 >> 740-856-9648
 >>
 >>
 >> _______________________________________________
 >> List sponsored by Redwood Alliance
 >>
 >> List Address: RE-wrenches@lists.re-wrenches.org
 >>
 >> Change listserver email address & settings:
 >>
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 >>
 >> List-Archive:
 >
 http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
 > l
 >>
 >> List rules & etiquette:
 >> www.re-wrenches.org/etiquette.htm
 >>
 >> Check out or update participant bios:
 >> www.members.re-wrenches.org
 >>
 > 
 > _______________________________________________
 > List sponsored by Redwood Alliance
 > 
 > List Address: RE-wrenches@lists.re-wrenches.org
 > 
 > Change listserver email address & settings:
 >
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 > 
 > List-Archive:
 >
 http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
 > l
 > 
 > List rules & etiquette:
 > www.re-wrenches.org/etiquette.htm
 > 
 > Check out or update participant bios:
 > www.members.re-wrenches.org
 > _______________________________________________
 > List sponsored by Redwood Alliance
 > 
 > List Address: RE-wrenches@lists.re-wrenches.org
 > 
 > Change listserver email address & settings:
 >
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 > 
 > List-Archive:
 >
 http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
 > 
 > List rules & etiquette:
 > www.re-wrenches.org/etiquette.htm
 > 
 > Check out or update participant bios:
 > www.members.re-wrenches.org
 > 
 > _______________________________________________
 > List sponsored by Redwood Alliance
 > 
 > List Address: RE-wrenches@lists.re-wrenches.org
 > 
 > Change listserver email address & settings:
 >
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 > 
 > List-Archive:
 >
 http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
 > 
 > List rules & etiquette:
 > www.re-wrenches.org/etiquette.htm
 > 
 > Check out or update participant bios:
 > www.members.re-wrenches.org

 -- 

 _______________________________________________
 List sponsored by Redwood Alliance

 List Address: RE-wrenches@lists.re-wrenches.org

 Change listserver email address & settings:
 http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

 List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

 List rules & etiquette:
 www.re-wrenches.org/etiquette.htm

 Check out or update participant bios:
 www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to