Pre cut the rails at ground level with your circular saw. Jeremy Rodriguez Solar Installation / Design Expert All Solar, Inc. 1463 M St Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand. On Jun 12, 2019, at 11:32 PM, frenergy <frene...@psln.com<mailto:frene...@psln.com>> wrote: Any suggestions for cutting rail with a Sawzall? Many times at the end of a run of PVs there could be 5-6" of rail (in this case DPW P8). I like to use a circular saw but sometimes I don't have enough clearance once the rail and panels are installed. The sawzall works but I'm looking for a blade that doesn't load up with aluminum too fast and cuts without too much vibration. Other ideas? Thanks, Bill Feather River Solar Electric Bill Battagin, Owner 4291 Nelson St. Taylorsville, CA 95983 530.284.7849 CA Lic 874049 www.frenergy.net<http://www.frenergy.net> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out or update participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org>
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
