Handheld battery powered bandsaw. Works great. We have the DeWalt version.

Chad Waits
President/Owner ­ Net Zero Solar
101 W. 5th St., Tucson, AZ  85705
Office: 520-207-4053
Cell: 520-270-4873
NABCEP Certified PV Installation Professional



From:  RE-wrenches <[email protected]> on behalf of
"James \"Jibril\" Gustafson" <[email protected]>
Reply-To:  RE-wrenches <[email protected]>
Date:  Thursday, June 13, 2019 at 5:20 AM
To:  RE-wrenches <[email protected]>
Subject:  Re: [RE-wrenches] Cutting rail

Sometimes there is not enough clearance to complete the cut with the
circular saw, then I finish with a cordless Sawzall.  I try not to push the
saw down, just let it do the work.

On Thu, Jun 13, 2019 at 6:02 AM James "Jibril" Gustafson
<[email protected]> wrote:
> I often cut rail ends with my cordless Dewalt circular saw.  It makes a nice
> straight cut, after marking the rail with a sharpie and speed square. Ear and
> Eye protection are crucial.
> 
> On Wed, Jun 12, 2019 at 11:24 PM Kirpal <[email protected]> wrote:
>> Just like the other gents mentioned...but I would add...get the saw blade
>> with 10 teeth per inch....will not clog up with the soft aluminum.   You will
>> love the saw for cutting conduit too.  All done relatively quietly without
>> all the jarring.
>> Kirpal
>> 
>> On Wed, Jun 12, 2019, 9:32 PM frenergy <[email protected]> wrote:
>>> Any suggestions for cutting rail with a Sawzall?  Many times at the end
>>> of a run of PVs there could be 5-6" of rail (in this case DPW P8).  I
>>> like to use a circular saw but sometimes I don't have enough clearance
>>> once the rail and panels are installed.  The sawzall works but I'm
>>> looking for a blade that doesn't load up with aluminum too fast and cuts
>>> without too much vibration.  Other ideas?
>>> 
>>> Thanks,
>>> 
>>> Bill
>>> 
>>> Feather River Solar Electric
>>> Bill Battagin, Owner
>>> 4291 Nelson St.
>>> Taylorsville, CA 95983
>>> 530.284.7849
>>> CA Lic 874049
>>> www.frenergy.net <http://www.frenergy.net>
>>> 
>>> 
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>> 
>>> 
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> List Address: [email protected]
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive: 
>>> http://www.mail-archive.com/[email protected]/maillist.html
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>>> 
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: [email protected]
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://www.mail-archive.com/[email protected]/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>> 
_______________________________________________ List sponsored by Redwood
Alliance List Address: [email protected] Change listserver
email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or
update participant bios: www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to