In the vain of Williams caution, you may also want to look at the amount of space between the bottom of the elevated section of the corrugated profile and the top of the ridge it is straddling - it may require a thicker gasketing or butyl layer in order to create a good seal. Howie Sun Catcher www.suncatchervt.com
On Fri, Feb 15, 2019 at 11:04 AM William Miller <will...@millersolar.com> wrote: > Ray: > > > > The straddle block does not fit every profile. We have been burned by > this reality. Check your measurements. > > > > William > > > > > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Ray > *Sent:* Thursday, February 14, 2019 10:42 PM > *To:* re-wrenches@lists.re-wrenches.org > *Subject:* Re: [RE-wrenches] Corrugated Metal - Odd Seam Profile > > > > SnapNRack makes a Corrugated Straddle Block > > Ray Walters > > Remote Solar > > 303 505-8760 > > On 2/14/19 10:37 AM, Jason Szumlanski wrote: > > Have you looked at the Proteabracket? > > Jason Szumlanski > Principal Solar Designer > Florida Solar Design Group > > > > On Thu, Feb 14, 2019, 12:05 PM Sam Haraldson <s...@onsiteenergyinc.com > wrote: > > Wrenches, > > > > I have encountered a corrugated metal seam profile that doesn't fit the > standard S-5! Corrubracket we typically employ. I'm looking for alternate > solutions if you will, please. The corrugation pattern is 1-1/4" from > "ridge" top to "ridge" top and the depth of the "valley" is 1/4". A > drawing is attached explaining this further. > > > > -- > > *Sam Haraldson*, Installation Manager > <https://onsiteenergyinc.com/about-us#haraldson> > OnSite Energy, Inc. > > NABCEP PV Pro #PV-042217-016714 > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > > _______________________________________________ > > List sponsored by Redwood Alliance > > > > List Address: RE-wrenches@lists.re-wrenches.org > > > > Change listserver email address & settings: > > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > > > List rules & etiquette: > > www.re-wrenches.org/etiquette.htm > > > > Check out or update participant bios: > > www.members.re-wrenches.org > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
