Ray:
The straddle block does not fit every profile. We have been burned by this reality. Check your measurements. William *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Ray *Sent:* Thursday, February 14, 2019 10:42 PM *To:* re-wrenches@lists.re-wrenches.org *Subject:* Re: [RE-wrenches] Corrugated Metal - Odd Seam Profile SnapNRack makes a Corrugated Straddle Block Ray Walters Remote Solar 303 505-8760 On 2/14/19 10:37 AM, Jason Szumlanski wrote: Have you looked at the Proteabracket? Jason Szumlanski Principal Solar Designer Florida Solar Design Group On Thu, Feb 14, 2019, 12:05 PM Sam Haraldson <s...@onsiteenergyinc.com wrote: Wrenches, I have encountered a corrugated metal seam profile that doesn't fit the standard S-5! Corrubracket we typically employ. I'm looking for alternate solutions if you will, please. The corrugation pattern is 1-1/4" from "ridge" top to "ridge" top and the depth of the "valley" is 1/4". A drawing is attached explaining this further. -- *Sam Haraldson*, Installation Manager <https://onsiteenergyinc.com/about-us#haraldson> OnSite Energy, Inc. NABCEP PV Pro #PV-042217-016714 _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
