Hey Sam,
Would Ejot work for this scenario? They have a wide range of
washers for that.
https://ejot-usa.com/products/solar-fastening-systems/for-exposed-fastener-metal-roofs/storm-washer-selection-guide
Andrew Perkins
Greenwired
P: 707-923-2001
F: 707-923-2077
1150 #1 Evergreen Rd
Redway, CA 95560
www.greenwired.com
Description: signature
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of Sam Haraldson
Sent: Thursday, February 14, 2019 9:05 AM
To: RE-wrenches
Subject: [RE-wrenches] Corrugated Metal - Odd Seam Profile
Wrenches,
I have encountered a corrugated metal seam profile that doesn't fit the
standard S-5! Corrubracket we typically employ. I'm looking for alternate
solutions if you will, please. The corrugation pattern is 1-1/4" from "ridge"
top to "ridge" top and the depth of the "valley" is 1/4". A drawing is
attached explaining this further.
--
Sam Haraldson, <https://onsiteenergyinc.com/about-us#haraldson> Installation
Manager
OnSite Energy, Inc.
NABCEP PV Pro #PV-042217-016714
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
