At some point if you can't troubleshoot, you will need to replace the system, or go with something that you understand. Good Luck!
Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 > Sandra: > > > > The system is a GTBB installation. The AGS is the only component I am > aware of that is losing communications. > > > > I donât know why it is losing communications. I donât know if it is a > Xanbus problem (or even what a Xanbus is), if it is an AGS problem or > whatever. I was hoping you could provide some insight on why it might be > losing communications. This might include any known problems, > troubleshooting tips and maybe a comment on the assertion from Schneider > tech support as to why we needed CAT5 cables in excess of 6 feet. Please > feel free to communicate freely on the subject. > > > > Thanks. > > > > William > > > > > > > > *From:* Sandra Herrera [mailto:sandra.herr...@schneider-electric.com] > *Sent:* Monday, February 4, 2019 6:42 AM > *To:* will...@millersolar.com > *Subject:* RE: [RE-wrenches] No Communication to XW CC > > > > William, > > > > What is the application (Off-grid, Grid-Tie)? > > > > Other than AGS loosing communications, is there any other device with > communication problems? > > If this is only on the AGS, how do you know that it is related to > communication on Xanbus? > > > > Sandra Herrera > Sales Application Engineer > Solar Business > Schneider Electric > > M 425-210-0163 > E sandra.herr...@schneider-electric.com > > Seattle, Washington > United States > > > > [image: > http://www.schneider-electric.com/b2b/en/solutions/for-business/smart-cities/launch-your-project/index.jsp#xtor=CS4-105-[Print]-[Event]-[LIO]-[Hong_Kong]] > <http://www.schneider-electric.com/b2b/en/solutions/for-business/smart-cities/launch-your-project/index.jsp#xtor=CS4-105-[Print]-[Event]-[LIO]-[Hong_Kong]> > > > > *Please consider the environment before printing this e-mail > > [image: Blog] <https://www.facebook.com/SchneiderElectric> [image: Blog] > <https://www.linkedin.com/company/schneider-electric> [image: Blog] > <http://blog.schneider-electric.com/> [image: Blog] > <https://www.twitter.com/SchneiderElec> [image: Blog] > <https://www.youtube.com/schneidercorporate> [image: Blog] > <https://plus.google.com/+schneiderelectric> [image: Blog] > <https://instagram.com/schneiderelectric> > > > > > > *From:* William Miller [mailto:will...@millersolar.com] > *Sent:* Friday, February 1, 2019 2:52 PM > *To:* Sandra Herrera <sandra.herr...@schneider-electric.com> > *Subject:* RE: [RE-wrenches] No Communication to XW CC > > > > [External email: Use caution with links and attachments] > ------------------------------ > > > > Sandra: > > > > Thank you for the speedy reply. Here are the components for just one > problematic system: > > > > 3 XW 6048 inverter, model number 865-1000. Master serial number is > 000011DFBFOB. > > 2 XW-MPPT60-150 charge controllers > > 1 SCP > > 1 AGS > > 2 terminators on the ends of data bus. > > > > The equipment is circa 2009. The case number is Case 19410834 and I spoke > with Chantille on 6/4/15. We replaced all of the network cables and we > still have problems. I suspect some of the new cables may be green in > color and I now understand that brand O cables may not meet data industry > specs. Before I replace them again, I want to know if I need 6â cables > or > any other advice you may offer. > > > > Again the AGS is frequently losing communications with the system. What > else should I check? Donât know the firmware version. I have a dongle. > > > > William > > > > *From:* Sandra Herrera [mailto:sandra.herr...@schneider-electric.com] > *Sent:* Friday, February 1, 2019 2:32 PM > *To:* will...@millersolar.com; RE-wrenches > *Subject:* RE: [RE-wrenches] No Communication to XW CC > > > > William, > > > > I will need system specific information to make any comments on your > reported communications issues. > > > > As far as the recommendations for 6 foot CAT5, that was done 5 to 7 years > ago for a specific application, and it is still valid when working with > large systems, where you are pushing the Xanbus network maximum. > > > > Sandra > > sandra.herr...@schneider-electric.com > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *William Miller > *Sent:* Friday, February 1, 2019 1:41 PM > *To:* RE-wrenches <re-wrenches@lists.re-wrenches.org> > *Subject:* Re: [RE-wrenches] No Communication to XW CC > > > > [External email: Use caution with links and attachments] > ------------------------------ > > > > Sandra: > > > > I have frequent communications problems with XW xanbus devices. At one > point I was told by Schneider tech support that all Cat5 leads need to be > a > minimum of 6 feet in length. Is this true? > > > > William > > > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Sandra Herrera > *Sent:* Friday, February 1, 2019 8:44 AM > *To:* RE-wrenches > *Subject:* Re: [RE-wrenches] No Communication to XW CC > > > > Hello Drake. > > In the Xanbus network, you have devices with power such as inverters, and > other devices without power. > > You can not connect an SCP directly to an MPPT60, because both SCP and > MPPT60 have no power, but if you have an inverter in the network, it > should > give sufficient power for the devices. > > There are several reasons why a device that is still fully functional but > not show up on the network. This ranges from the minor CAT5 cable problem > to maybe a damage communication card. Some may be solved with a simple > factory reset, and other cases may require a replacement. > > However, without the full context of the conversation, I do not see how > connecting ComBox or SCP will make any difference. Although, the ComBox as > an AC power supply it will not power the Xanbus network, it is only to > power the ComBox. > > As far as connecting ComBox directly to your laptop without a router, this > is possible, but you need to change your network setting on the laptop. > > Sandra > > sandra.herr...@schneider-electric.com > > > > > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *drake.chamber...@redwoodalliance.org > *Sent:* Friday, February 1, 2019 8:28 AM > *To:* RE-wrenches <re-wrenches@lists.re-wrenches.org> > *Subject:* [RE-wrenches] No Communication to XW CC > > > > [External email: Use caution with links and attachments] > ------------------------------ > > > > Hello Wrenches, > > > > We have a situation on a repair job (that I didn't install), where the > charge controllers are not showing up on the SCP. There are 3 charge > controllers, two 600 V and one 150 volt units. There is a ComBox and and > SCP. > > > > One Schneider tech recommended that I unplug the SCP and plug a laptop > directly into the ComBox..The manual shows a router being used. > > > > Can a laptop be plugged directly in to a ComBox? Will this be helpful in > finding the missing CCs? > > > > Even with new Ethernet cables, the CCs don't show up. > > > > Thanks, > > > > Drake > > > > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > ______________________________________________________________________ > > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > ______________________________________________________________________ > > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > ______________________________________________________________________ > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
