Did you power down all of the equipment making sure the DC bus goes to zero vdc?
I am not sure on the pc going straight in and unless the combox has been kept up to date with firmware I am doubting it. The port on combox says ethernet 10/100. Good Luck! Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail offgridso...@sti.net text 209 813 0060 > > Hello Wrenches, > > We have a situation on a repair job (that I didn't install), where the > charge controllers are not showing up on the SCP. There are 3 charge > controllers, two 600 V and one 150 volt units. There is a ComBox and > and SCP. > > One Schneider tech recommended that I unplug the SCP and plug a laptop > directly into the ComBox..The manual shows a router being used. > > Can a laptop be plugged directly in to a ComBox? Will this be helpful > in finding the missing CCs? > > Even with new Ethernet cables, the CCs don't show up. > > Thanks, > > Drake > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
