http://www.sciencedaily.com/releases/2014/02/140213122404.htm
http://www.nrel.gov/docs/fy12osti/51664.pdf
go to the conclusion on page 18.
Thanks,
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 6/1/2015 5:46 PM, jay peltz wrote:
HI Ray,
Can you tell me/us where you have your data on the a-Si having higher
voltage degradation over time?
thanks
jay
On Sun, May 31, 2015 at 11:31 AM, Ray Walters <r...@solarray.com
<mailto:r...@solarray.com>> wrote:
Yes, amorphous modules degrade faster then crystalline cells. 15
years will really start catching up with you, that's why we always
tried to stick to monocrystalline when we could.
I think your best option for now is to rewire the array for much
higher voltage. Even your current voltage problem aside, the
system will run more efficiently at higher voltage: Less current
= less voltage drop. I would probably just jump the 4 module sets
in series in the combiner box to 8 in series. Should be a quick
fix, and really show an improvement. I've seen this same issue
with low voltage polys and undersized wiring. Usually the MPP
controllers like some room to play with; as soon as the MPP
voltage gets close to or less than battery voltage, the current
drops off substantially.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760 <tel:303%20505-8760>
Jay Peltz
Peltz Power
jay.pe...@gmail.com <mailto:jay.pe...@gmail.com>
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
