Wrenches, Our utilities require an external AC disconnect between the inverter and the point of interconnection, located next to the meter. In the past, we have marked this switch with the language in 690.17 (although no AHJ or utility has required it). Because we generally argue against the necessity of this switch, I don't feel it is accurate to say that "terminals on both the line AND load sides may be energized in the open position".
Do other Wrenches post this plaque? Is there a way that both line AND load terminals of this switch could be energized? (other than an inverter not paying attention to its UL listing?) Thanks again for your thoughts, P. Phil Schneider Creative Energies _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
