Peter, Pro-Solar offers the black end/mid clamps so they have a place that can do the work. You may want to ask them if they can offer you black tilt-up legs and maybe even black rails.
Richard J. Bogan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Parrish Sent: Wednesday, July 30, 2008 1:44 PM To: 'RE-wrenches' Subject: [RE-wrenches] Touching Up Anodized Al Rails Wrenches, [I don't think this got posted earlier or perhaps it is too prosaic a question for reply] We have a high-end client for whom we are installing a 12 kWp system on an essentially flat roof. The terrain slopes down from the street to the house (and there is an additional 2.5 deg slope on the roof in the same direction), hence making the array visible at some point away from the house going uphill to the street. The client has asked us to paint the back tilt-legs and rails of the array the same color as the PV module frames. The reason being the legs and rails are clear anodized (ProSolar) and the modules are black anodized (BP SX3200). We are talking about only the back of one row, as the front of the row is so low as to be truly out of sight. The question: what do we need to do to prep and paint the clear anodized tilt legs and rails? I'm hoping that a quick TSP wash, rinse and dry, followed by a primer appropriate for Al, followed by a high quality exterior paint. Any suggestions on primer and finish coat products? We want this to look good and last a long time. Thanks, - Peter Peter T. Parrish, Ph.D., President California Solar Engineering, Inc. _______________________________________________ List sponsored by Home Power magazine RE-wrenches@lists.re-wrenches.org http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out participant bios: www.mrsharkey.com/wrenches/ The information contained in this message may be confidential and is for the intended addressee only. Any unauthorized use, dissemination of the information, or copying of this message is prohibited. If you are not the intended addressee, please notify the sender immediately and delete this message. _______________________________________________ List sponsored by Home Power magazine RE-wrenches@lists.re-wrenches.org http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
