On Monday, February 18, 2013 2:25:29 PM UTC-5, Michael Blattau wrote:
>
> I think the term is "broaching" (not to be confused with the machining 
> process).  We use a lot of PEM nuts  (http://www.pemnet.com) in our 
> enclosures in which a press is used to force a fastener into a piece of 
> sheet-metal.  Swaging is more akin to riveting.  Swaging can be done with a 
> hammer and punch.
>
 
Mike,
 
One again Herr Tyng has developed something that defies description.
He said that "he whacked it with a hammer" and then tightened the
bolt to keep it in place.
 
His process uses a toothed tool to plastically deform a workpiece by impact.
There is no metal removal.
 
Swaging is plastic deformation induced by impact or pressure and usually 
involves a mandrel or die, not a toothed tool.
 
Broaching uses a toothed tool (generally for metal removal) and usually 
does 
not involve impact.
 
Because I was not familiar with impact broaching and because only plastic 
deformation occured, I detaulted to swaging.
 
His process is actually more like hand stamping a serial number into
a metal part with steel stamps.  
http://www.mcmaster.com/#metal-stamps/=ljo5as
  
Lastly this conversation occurred just after the ceremonial
Opening of the Donuts Box, and I was on a sugar high from the 
Ravens donuts with purple icing.
 
Joe
 

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to