I resent that, Rocheford! I'm a Yorkshireman! Midlander my arse . . .
On Thursday, 7 February 2013 01:40:20 UTC, TyngTech wrote: > > The Tyng T-Max suspension is basically an easily assembled and adjustable > rubber torsion axle (RTA) ideal for use in small vehicular applications. > RTA's are commonly used in the trailer industry and commercial applications > where compact size and low parts count are advantageous. They consist of a > square axle inserted into a larger square outer casing at a 45 degree > offset. Compressed rubber cords are sandwiched between the two pieces and > provide a springing and damping function. The manufacture of RTA's > usually require specialized jigs that compress and insert the axle and > rubber cords into the outer casing under high pressure. A process that > Airstream trailers uses requires liquid nitrogen to freeze the assembly > for insertion into the outer casing. Once initially assembled, RTA's are > set for life as there is no way to adjust them or repair them after > manufacture. > > What I have done in my implementation is to basically split the outer > casing. What this allows you to do is to insert the inner axle and > uncompressed rubber cords into the assembly and then squeeze it all down by > clamping the outer casing back together. A big advantage with this setup > is that you can easily adjust spring rate by changing the length of the > rubber cords. Longer cords give you a stiffer suspension, shorter cords, a > softer and more compliant suspension. Another feature in my design is a > bushing that supports the back end of the inner axle (needed when the cords > are shorter). The bolt that holds the trailing arm to the inner axle can > be loosened and allows you to adjust the angle of the arm in relation to > the inner axle. This gives you the ability to adjust whatever preload you > need for your application. By reviewing the pics you can see that the > design is easily fabricated using ordinary hardware store items. > > Believe it or not, the split casing design in this application appears to > be a fairly innovative concept according to a couple of sources and with > potential commercial applications. I've started the process of a patent > application to see if the patent office concurs. > > Steve Tyng, 2/6/2013 > > > Prototype assembled on the bench. > > > <https://lh5.googleusercontent.com/-ilJP8qpWj3o/URL8nGg6yYI/AAAAAAAAAKg/_x2x_5ARxbw/s1600/T-Max1.jpg> > > > Compression plate removed. > > > <https://lh5.googleusercontent.com/-w8mmV5vcDcg/URL8tI-upCI/AAAAAAAAAKo/EUORKZXQm-o/s1600/T-Max2.jpg> > > > All the bits. > > > <https://lh5.googleusercontent.com/-wLsNPclE_Fo/URL8yOriuvI/AAAAAAAAAKw/ACehPsSgaRs/s1600/T-Max3.jpg> > > > First production version first assembled. > > > <https://lh4.googleusercontent.com/-CalHSQqPhoA/URL816Q2VDI/AAAAAAAAAK4/fmWLcuLCVIU/s1600/T-Max4.jpg> > > > > > > > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
