OR....you can saw off the axle flush with the locknuts and use a good old-fashioned all steel quick release. I found this on Sheldon's site somewhere. It actually works quite well on V-dropouts. If it didn't, horizontal dropouts wouldn't work because the pull is much greater on the pedal stroke than are required to hold the rider's weight...ie evertime you sheared down on the pedals the wheel would be pulled out of the dropout. Doesn't allow quite as much tensioning room as dropouts or track ends but most ring/ cog combinations should work. A much prettier and cheaper "fix" than a tensioner or eccentric hub or BB.
On Tue, Apr 10, 2012 at 1:39 PM, Allingham II, Thomas J < thomas.alling...@skadden.com> wrote: > Or you can use one of the lovely White ENO hubs, which I've done on > current Bleriot iteration > > -----Original Message----- > From: rbw-owners-bunch@googlegroups.com [mailto: > rbw-owners-bunch@googlegroups.com] On Behalf Of Seth Vidal > Sent: Tuesday, April 10, 2012 1:33 PM > To: rbw-owners-bunch@googlegroups.com > Subject: Re: [RBW] Re: SimpleOne > > On Tue, Apr 10, 2012 at 1:30 PM, Imladris <dgoldberger...@gmail.com> > wrote: > > Whenever I get the urge to own a "fixie", I just start riding in one > > gear and never stop pedaling. Then, when I hit a steep uphill or > > downhill, the urge passes and I shift. ;-) > > > > As a practical question, why couldn't a Rambouillet (or a Roadeo) be > > set up as a single speed and converted back when you need gearing? > > The SimpleOne seems to be outside of the Rivendell velosophy of > > practical, but beautiful, bikes. Also, once you throw brakes on a > > fixie, you alienate the one demographic (in NYC, anyway) that seems to > > want to ride one. > > > Ram or Roadeo have vertical dropouts (as do almost all rivs except for the > oldest ones and the qb/so. > > You can single-speed a bike with vert dropouts but you need a chain > tensioner and then, well, that's just like having a derailler. > > -sv > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > > > > > ------------------------------------------------------------------------------ > **************************************************** > > To ensure compliance with Treasury Department regulations, we advise you > that, unless otherwise expressly indicated, any federal tax advice > contained in this message was not intended or written to be used, and > cannot be used, for the purpose of (i) avoiding tax-related penalties under > the Internal Revenue Code or applicable state or local tax law provisions > or (ii) promoting, marketing or recommending to another party any > tax-related matters addressed herein. > **************************************************** > **************************************************** > > This email (and any attachments thereto) is intended only for use by the > addressee(s) named herein and may contain legally privileged and/or > confidential information. If you are not the intended recipient of this > email, you are hereby notified that any dissemination, distribution or > copying of this email (and any attachments thereto) is strictly prohibited. > If you receive this email in error please immediately notify me at (212) > 735-3000 and permanently delete the original email (and any copy of any > email) and any printout thereof. > > Further information about the firm, a list of the Partners and their > professional qualifications will be provided upon request. > **************************************************** > > ============================================================================== > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
