Barlow Pass, endurance casing, mounted on Velocity A23 rims, tubeless, 40 psi and about 2 seasons on them. I measure just a cat whisker under 40mm, I did attempt to measure the cat’s whisker but the cat was having none of the caliper in the face
On Tuesday, December 24, 2024 at 12:27:05 AM UTC-5 Bob Walicki wrote: > Adding to this, just for more data in case it gets searched at some point. > > I'm running Snoqualmies, Endurance Plus. 700x44 at about 40 psi > (tubeless). They're at just under 43mm. > > Not too shabby. > > On Sat, Dec 14, 2024 at 10:09 PM Oliver Moss <oliverda...@gmail.com> > wrote: > >> Thanks again all >> >> On Saturday, December 14, 2024 at 8:30:28 PM UTC-5 >> ber...@bernardduhon.com wrote: >> >>> I Have RH 38 MM Barlow pass & 35 mm Bon Jovi pass endurance casing on >>> Campy proton rims 18 mm wide >>> >>> They measure spot on >>> >>> >>> >>> RH 32 mm measure 29 mm on campy neutrons, but RH tells you on the >>> website they will measure 29mm >>> >>> >>> >>> >>> >>> BTW the only tires I have ever had that measure as advertised >>> >>> >>> >>> *From:* rbw-owne...@googlegroups.com <rbw-owne...@googlegroups.com> *On >>> Behalf Of *Father of Sam >>> *Sent:* Friday, December 13, 2024 11:12 PM >>> *To:* RBW Owners Bunch <rbw-owne...@googlegroups.com> >>> *Subject:* [RBW] Re: Rene Herse Tire Actual Width >>> >>> >>> >>> Hi Oliver, >>> >>> >>> >>> You may have heard enough already, but I thought I'd throw my 2 cents >>> in: >>> >>> >>> >>> I've had 4 different models of RH tires mounted solely on Velocity >>> Cliffhanger rims (700c and 650B with an IW of 25mm), and all have measured >>> exactly as the label on their sidewalls indicate. Cliffhangers are about >>> as wide a rimbrake capable rim as you'll find. My guess is that the >>> manufacturer would rather overshoot on the label than undershoot, as >>> ultimately the width of the rim dictates the actual mounted tire width. If >>> RH were labeling their widths according to a median instead of a maximum >>> rim width (say, 19 or 20mm), then the Hatcher Pass might be labeled 700 x >>> 44 instead of 700 x 48. If they're labeled as 44mm wide, and I've >>> carefully measured the clearance between my chainstays as 48mm, then I >>> would buy these Hatcher Pass tires expecting that they would have as >>> perfect (IMO) 2mm of clearance on each side. But then, lo and behold, I >>> mount them on my Cliffhanger rims, and I'm left with a wheel whose tire >>> rubs the chainstays and I'm mumbling curses under my breath. >>> >>> >>> >>> Makes sense to me that stated width errs on the larger side. Hopefully >>> that lends a little peace of mind. >>> >>> >>> >>> FWIW, >>> >>> Peter >>> >>> >>> >>> On Thursday, December 12, 2024 at 9:34:26 PM UTC-8 Oliver Moss wrote: >>> >>> I've picked up a few different widths of RH 650b tires used and noticed >>> that they are consistently under the listed width by about 3-5mm. On the RH >>> website they list the approximate "actual" width with certain given rim >>> IDs, and I've noticed the ones I've gotten to be under. >>> >>> >>> >>> The two rim IDs i've used are 17mm and 21.6mm >>> >>> >>> >>> As an example, I'm running a set of Babyshoe Pass 42s on 17mm ID and >>> they are measuring 38mm >>> >>> >>> >>> None of this is really too much of a deal as they are great tires and I >>> really enjoy riding on them, but I wondered what other's have noticed in >>> terms of actual width. Of course I know it all depends on the rim and >>> tire... ect. but it was something I noticed and thought I'd ask if anyone >>> else had the same experience. >>> >>> >>> >>> Cheers, >>> >>> >>> >>> ~Oliver >>> >>> -- >>> >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com. >>> >>> To view this discussion visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/6d05e7b3-ac54-46ab-b1a3-829883b282c2n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/6d05e7b3-ac54-46ab-b1a3-829883b282c2n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> > To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/8b810ac4-59c8-4e08-98b7-2b928d12eaacn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/8b810ac4-59c8-4e08-98b7-2b928d12eaacn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/6610b062-e203-43c2-a45f-1e26b3bf25abn%40googlegroups.com.
