Oliver, My experience with RH tires on four bikes (three of which I currently own) differs.
- Homer, Velocity Dyad rims (18.6 mm inner width, according to Velocity's website): Barlow Pass measured 38 mm. I no longer have this lovely bike. - Bantam custom: Pacenti Brevet rims: Babyshoe Pass measure 42 mm. - Riv All Rounder, Velocity Cliffhanger rims (25 mm inner width): Humptulips Ridge, endurance casing, measure 54 mm. - Surly LHT, Alex Adventurer rims (18.7 mm inner width, according to FreeSpoke): Rat Trap Pass, endurance casing, measure 52 mm. Measurements done with the same analog caliper. In each case (well, I *think* this is what I did with my Homer back in 2016), I mounted the tires on the rims, inflated to the stated maximum pressure, and left them for a couple days. -- Bob On Thursday, December 12, 2024 at 10:34:26 PM UTC-7 Oliver Moss wrote: > I've picked up a few different widths of RH 650b tires used and noticed > that they are consistently under the listed width by about 3-5mm. On the RH > website they list the approximate "actual" width with certain given rim > IDs, and I've noticed the ones I've gotten to be under. > > The two rim IDs i've used are 17mm and 21.6mm > > As an example, I'm running a set of Babyshoe Pass 42s on 17mm ID and they > are measuring 38mm > > None of this is really too much of a deal as they are great tires and I > really enjoy riding on them, but I wondered what other's have noticed in > terms of actual width. Of course I know it all depends on the rim and > tire... ect. but it was something I noticed and thought I'd ask if anyone > else had the same experience. > > Cheers, > > ~Oliver > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/3e13876d-fba0-456e-843f-017f8dea204an%40googlegroups.com.
