@John - Right on ! Kim Hetzel.
On Tuesday, April 2, 2024 at 5:49:23 AM UTC-7 JohnS wrote: > +1 for Universal Cycles, they are my go to for Jagwire cables, SRAM chains > and other mundane parts that I use when rebuilding a bike. Also always > impressed with the creative use of brake cable noodles. As I recall someone > posted using one at the stem or some such. > > JohnS > > > On Tuesday, April 2, 2024 at 8:35:53 AM UTC-4 Kim H. wrote: > >> @Allan - >> I thank-you for sharing with me the details of how your 135 degree brake >> noodle fits onto your rear brake cable housing. I appreciate it very much. >> Thank-you for the noodle link, as well. Universal Cycles is relatively >> close to me out of Oregon. >> >> Kim Hetzel. >> >> On Tuesday, April 2, 2024 at 3:48:57 AM UTC-7 Allan McLane wrote: >> >>> Kim, >>> >>> The photo shows how Riv arranged the cable housing guide braze-on on >>> this bike, a Rosco Platypus. The entire housing slides through the braze-on >>> and the end of the housing slips into the entrance of the noodle. It isn’t >>> really necessary but I also slipped a short length of clear tubing around >>> the outside of noodle about midway along, just to hold it off the seat tube >>> paint. >>> >>> Here’s one source for that part: >>> https://www.universalcycles.com/shopping/product_details.php?id=205 >>> >>> Allan in SE Vt >>> >>> >>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/bdce20f4-0073-4c9e-ac5f-7b8bef7df177n%40googlegroups.com.
