Re: [RBW] Re: Dynamo Wiring inside the Fork and Frame?

[Brian Barnhart]

Nice job Matthew, and thanks for the pics and explanation! I think I’ll try the same, but with B&M wire. I just got a new B&M IQ-XS light that I need to properly wire up with my Sinewave Reactor usb charger. I also still want to get a rear light too.  Brian On May 2, 2023, at 11:44 PM, Matthew Williams <matthewwilliamsdes...@gmail.com> wrote:  Hi everyone, An update: I was able to fish the SON dynamo coaxial wire through the fork! Here’s how I did it: <IMG_5038.jpg> I first threaded a length of picture-hanging wire as a leader through the forks, starting from the crown. I used an old V-brake noodle to guide the leader wire around the 90-degree turn inside the fork tube. <IMG_5037.jpg>   When the wire was near the hole at the end of the fork, I pushed a loop of wire into the hole to catch the end of the leader. <IMG_7918.jpg> <IMG_7920.jpg> The coaxial wire just barely fit through the hole at the fork end, so I cut down the coaxial wire and tied it in a square knot with the end of the leader wire. <IMG_7919.jpg> I then gently pushed the coaxial wire up though bottom of the fork while simultaneously gently pulling the leader wire from the crown. <IMG_7921.jpg> Success! <IMG_7923.jpg> Thanks everyone, for your advice, expertise, encouragement, and wisdom. I very much appreciate it. -- You received this message because you are subscribed to a topic in the Google Groups "RBW Owners Bunch" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/rbw-owners-bunch/aXeIXqwZPYg/unsubscribe. To unsubscribe from this group and all its topics, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1b001b46-d5a9-4e79-b5c2-e72448ff9e70n%40googlegroups.com. <IMG_7920.jpg> <IMG_7919.jpg> <IMG_5038.jpg> <IMG_7923.jpg> <IMG_7918.jpg> <IMG_7921.jpg> <IMG_5037.jpg> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3C453BFA-7E39-4F88-B5DE-C8B2D44A9D7C%40gmail.com.