My question is, why wouldn’t everyone running a dynamo do this? Perhaps for sharing a single light with more than one bike? So clean.
Sent from my iPhone > On May 3, 2023, at 2:34 AM, Matthew Williams > <matthewwilliamsdes...@gmail.com> wrote: > > Hi everyone, > > An update: I was able to fish the SON dynamo coaxial wire through the fork! > Here’s how I did it: > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_5038.jpg> > > > I first threaded a length of picture-hanging wire as a leader through the > forks, starting from the crown. I used an old V-brake noodle to guide the > leader wire around the 90-degree turn inside the fork tube. > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_5037.jpg> > > > When the wire was near the hole at the end of the fork, I pushed a loop of > wire into the hole to catch the end of the leader. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_7918.jpg> > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_7920.jpg> > > > The coaxial wire just barely fit through the hole at the fork end, so I cut > down the coaxial wire and tied it in a square knot with the end of the leader > wire. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_7919.jpg> > > > I then gently pushed the coaxial wire up though bottom of the fork while > simultaneously gently pulling the leader wire from the crown. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_7921.jpg> > > > Success! > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. > <IMG_7923.jpg> > > > Thanks everyone, for your advice, expertise, encouragement, and wisdom. I > very much appreciate it. > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/BDC68E17-0661-4E00-BC8E-5B4A558BB77E%40gmail.com. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/9E1D927C-9F33-4F83-ABDE-09E03CD3F120%40gmail.com.
