Hi I recently dipped my toe into the tubeless phenomenon and had some wheels built by a reputable builder using tubeless Velocity Quill rims and GravelKing SK's in 700x43. Over the past week, some sealant has been seeping out of the rim and is showing up in a dried pattern on the rim and tire. I did a little research online and others have said that high heat and humidity can cause seepage...and we've had plenty of both the past 10 days in New York. Assuming everything has been set up correctly, does anyone have experience with seepage that looks like this (pics attached) *Note, no pressure (or negligible pressure) has been lost. Pics were take while my bike was on hitch mounted car rack. I cleaned the wheels and it happened again today ..While bike was out of the rack Also it's both front and rear wheels.
<https://lh3.googleusercontent.com/-bTtrFRABk0M/W2Ss7NGjJ4I/AAAAAAAABOo/enIXrYOXLjcH1CZjL4RqbLfD74RbunJxwCLcBGAs/s1600/IMG_9749.JPG> <https://lh3.googleusercontent.com/-_LnBCtoo3zU/W2Ss-i5-NxI/AAAAAAAABOs/b7npp49Lzlo5gCypvRzjjpUovgobAGoVACLcBGAs/s1600/IMG_9750.JPG> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
