On Thu, Feb 18, 2010 at 11:10 AM, Dave Lloyd <dlloyd1...@gmail.com> wrote:
> The trick to removing the cable from the
> cassette joint is using a 2mm allen wrench ot move the cassette joint around
> to take the tension off the cable so that you can easily unhook the cable
> end.  Needle nose pliers are also handy for removing the housing end from
> the cassette joint.

If everything else were equal, i think knowing i'd have to carry a 2mm
allen on the bike at all times might break the deal for me. I've done
some minimal work on IGH bikes, in new/like new condition, and on a
work stand. That was fine, but i don't know that i'd want to swap in a
tube in the cold and/or rain when there's a very lose-able,
hard-to-maneuver-with-cold-hands tiny wrench involved.

On the idea that IGH bikes aren't meant for hard use, that makes me
wonder about the hubs used for racing in Britain back in the day. Were
they really that much more durable, or was regular repair just an
accepted fact with them?

-- 
Bill Connell
St. Paul, MN

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to rbw-owners-bu...@googlegroups.com.
To unsubscribe from this group, send email to 
rbw-owners-bunch+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to