On Wed, May 22, 2002 at 06:30:08PM -0500, Trey Nolen wrote: > code. We upgraded to Qmail-scanner 1.12 because it addressed this issue. We > also upgraded our reformime because it was an older version with bugs and > q-s 1.12 required the update. Shortly thereafter we started having HUGE > perfomance problems. Our load averages which normally ran about 2 were > running 25-50. We made the switch to sophie to try to increase efficiency
Something else is wrong. There have never been any changes to Q-S that could account for such an increase. > If you telnet to the mail server at > port 25, it will sometimes take over a minute to respond. Then, it will seem > to fix itself after a few minutes. During the time of slow response, load There's a problem for a start. Q-S isn't invoked by qmail-smtpd until the DATA call occurs - so something else is doing that. > (sophie -D) and with daemontools -- both with the same result. This is not > a reverse resolution issue as we call tcpserver with -R -H and -l0. Does > anyone have any ideas as to what might be happening? What else is happening? I mean you say you have a load average of 25-50 - what does top show you? The cause of that load would be waving at you :-) -- Cheers Jason Haar Information Security Manager Trimble Navigation Ltd. Phone: +64 3 9635 377 Fax: +64 3 9635 417 _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ Qmail-scanner-general mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/qmail-scanner-general
