W dniu 2015-05-05 o 08:56, Johannes Berg pisze:
On Mon, 2015-05-04 at 23:16 +0200, Sylwester Petela wrote:
[ 456.056000] DSL[00]: negative response for MsgID=0x2B0A
(Class=0x00003100) - on try 0!
[ 456.764000] DSL[00]: Error for send CMD MsgID=0x2B0A - KEEP line!
[ 456.768000] DSL[00]: ERROR - ReTx PM counters read failed!
[ 457.032000] MEI_DRV[00 - 01]: ReadAck[0x2B0A] - FctOP ERROR 0x31!
and after about 20-30 min hangs, after disabling ReTx at build system
How did you disable ReTx?
Added to makefile in vdsl-app and vdsl-control
--disable-dsl-pm-retx-counters \
--disable-dsl-pm-retx-thresholds \
vdsl_cpe_control commands were ignored when trying to disable it by them.
stays online for at least 6 hours (didn't test further) with some
warnings repeating every two seconds:
[ 458.772000] DSL[00]: WARNING - Data Path counters are not supported
for the FE!
That seems pretty harmless - the driver code is really really ugly
though. Probably should just remove the message.
Cannot find witch function this message is referring to, need to
investigate more.
vectoring and ReTx works acording to friend but system log shows some
errors as well like on my ADSL line but not so many.
What firmware/driver combination was this with?
xcpe_567517_562301.bin: VDSL over ISDN incl. vectoring support for
VRX200, version: 6.7.5 | ADSL Annex A for VRX200, version: 6.2.3
4.15.2 -app/control; 1.4.5 -mei
On ADSL and also on VDSL with never firmware and errors/warnings
appearing in log, system is under quite big load, compared to stock drivers.
Yeah, this is true. I'm not sure what I said yesterday ("it's too slow")
is correct, but certainly it's pretty loaded.
johannes
Yes slow but why ? Because of load or because of hardware, Zyxel on
stock openwrt driver can achieve 80Mbps without that much load.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
