On Mon, 2015-05-04 at 23:16 +0200, Sylwester Petela wrote:
> [ 456.056000] DSL[00]: negative response for MsgID=0x2B0A
> (Class=0x00003100) - on try 0!
> [ 456.764000] DSL[00]: Error for send CMD MsgID=0x2B0A - KEEP line!
> [ 456.768000] DSL[00]: ERROR - ReTx PM counters read failed!
> [ 457.032000] MEI_DRV[00 - 01]: ReadAck[0x2B0A] - FctOP ERROR 0x31!
>
> and after about 20-30 min hangs, after disabling ReTx at build system
How did you disable ReTx?
> stays online for at least 6 hours (didn't test further) with some
> warnings repeating every two seconds:
>
> [ 458.772000] DSL[00]: WARNING - Data Path counters are not supported
> for the FE!
That seems pretty harmless - the driver code is really really ugly
though. Probably should just remove the message.
> vectoring and ReTx works acording to friend but system log shows some
> errors as well like on my ADSL line but not so many.
What firmware/driver combination was this with?
> On ADSL and also on VDSL with never firmware and errors/warnings
> appearing in log, system is under quite big load, compared to stock drivers.
Yeah, this is true. I'm not sure what I said yesterday ("it's too slow")
is correct, but certainly it's pretty loaded.
johannes
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
