> I've never seen that, but which firmware are you using? > > I'd been using the speedport 1.21 > (e1ef690e8dc0075468d4b6ba7bcdd0fc710bc671) one IIRC. I am running Chaos Calmer (but I've also tried Barrier Breaker) and that is exactly the firmware I am using.
> Are you on VDSL Annex B, where you'd fall back to ADSL 16/1 when > vectoring isn't supported? If so, this configuration should work: No VDSL here yet. A fritz box (with stock firmware) on the same line reports: http://abload.de/img/fritz_box_dsldzudk.png > config vdsl 'dsl' > option annex 'b' > option firmware '/lib/firmware/vdsl.bin' > option tone 'b' > option xfer_mode 'ptm' My settings look similar: I use xfer_mode 'atm' - but the other values are identical. > On my previous ISP I was on Annex A, but I don't have the right > configuration right now. I'm using a line provided by Deutsche Telekom (resold to 1&1, but that shouldn't make a difference). > First I'm going to replace this router with one that's faster, and then > I'll start playing with this :-) Right now I need it to have internet > connectivity. Makes sense - never play with productive hardware :-) Regards, Martin _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
