On Sat, Dec 13, 2014 at 04:42:03PM -0700, Davey Hutchison wrote:
> The boot loader on these boards is routerboot. I do not know if routerboot
> provides a md like command or not.
>
Here's the RouterBOOT menu on my RB2011:-
RouterBOOT booter 3.18
RouterBoard 2011UiAS-2HnD
CPU frequency: 600 MHz
Memory speed: 200 MHz
Memory size: 128 MiB
NAND size: 128 MiB
Press any key within 9 seconds to enter setup
RouterBOOT-3.18
What do you want to configure?
d - boot delay
k - boot key
s - serial console
n - silent boot
o - boot device
f - cpu frequency
r - reset booter configuration
e - format nand
w - repartition nand
g - upgrade firmware
i - board info
p - boot protocol
b - booter options
t - do memory testing
x - exit setup
your choice:
--
Chris Green
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
