duh.... it reversed the nics, i plugged into the poe and 192.168.1.1 is
reachable.... i was plugged into the secondary port
im in its live
On Fri, Jun 13, 2014 at 10:09 PM, and...@polkaspots.com <
and...@polkaspots.com> wrote:
> Do you have a serial console?
> Plug the main directly in to your network and do an arp scan for the mac.
>
>
> On 13/06/14 13:06, Outback Dingo wrote:
>
> Shoot..... its not coming up....... after the tftp it was flashing white
> blue white blue white blue for a bit then stopped.....
>
> doesnt seem to be doing much....... cant ping 192.168.1.1 from my
> host........ hrmmmmm.... should i unplug plug it back in
>
>
> On Fri, Jun 13, 2014 at 10:05 PM, and...@polkaspots.com <
> and...@polkaspots.com> wrote:
>
>> Great!
>> I was confused about the Tx-Power: 18 dBm but that makes sense, as it has
>> 2 x 5dBi passive gain antennas. So the total will actually be 28. Powerful
>> little one.
>>
>>
>> On 13/06/14 12:53, Outback Dingo wrote:
>>
>> tftp> put
>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin
>> Sent 6881628 bytes in 4.0 seconds
>>
>>
>> FINALLY.....
>>
>>
>> On Fri, Jun 13, 2014 at 9:49 PM, Outback Dingo <outbackdi...@gmail.com>
>> wrote:
>>
>>> yeah i just noticed that you dropped that from the initial patch, caught
>>> it fixed it and now i have an image.
>>>
>>> its been too long, need more coffee.......... but Thanks....... always
>>> something simple
>>>
>>>
>>> On Fri, Jun 13, 2014 at 9:46 PM, and...@polkaspots.com <
>>> and...@polkaspots.com> wrote:
>>>
>>>> Oh, sorry I think is actually my bad, I didn’t paste everything, grrr
>>>>
>>>>
>>>> target/linux/ar71xx/image/Makefile:
>>>>
>>>>
>>>> $(eval $(call
>>>> SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))+$(eval
>>>> $(call
>>>> SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-U20,ttyS0,115200,BZ,BZ,ar7240))
>>>>
>>>>
>>>> On 13/06/14 12:42, Outback Dingo wrote:
>>>>
>>>> seriously..... i did it even exactly as you stated and still no
>>>> joy..........
>>>>
>>>> and ive been using/developing on WRT for 6+ years.... Grrrrrrr what
>>>> did i miss
>>>> -rw-r--r-- 1 dingo dingo 5636096 Jun 13 21:37
>>>> openwrt-ar71xx-generic-root.squashfs
>>>> -rw-r--r-- 1 dingo dingo 5308420 Jun 13 21:37
>>>> openwrt-ar71xx-generic-root.squashfs-64k
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-airrouter-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-rspro-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-rspro-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-rs-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-rs-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6881628 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6881284 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-unifi-squashfs-factory.bin
>>>> -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
>>>> openwrt-ar71xx-generic-ubnt-unifi-squashfs-sysupgrade.bin
>>>> -rw-r--r-- 1 dingo dingo 1425844 Jun 13 21:37
>>>> openwrt-ar71xx-generic-uImage-gzip.bin
>>>> -rw-r--r-- 1 dingo dingo 1034289 Jun 13 21:37
>>>> openwrt-ar71xx-generic-uImage-lzma.bin
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Jun 13, 2014 at 8:48 PM, and...@polkaspots.com <
>>>> and...@polkaspots.com> wrote:
>>>>
>>>>> Ubiquiti all, The outdoor+ profile is not defined, so it will call
>>>>> the normal Outdoor if you select that one.
>>>>>
>>>>>
>>>>>
>>>>> On 13/06/14 11:47, Outback Dingo wrote:
>>>>>
>>>>> Your building target for Ubiquiti all ? or UniFi OutDoor ?
>>>>>
>>>>>
>>>>> On Fri, Jun 13, 2014 at 8:35 PM, and...@polkaspots.com <
>>>>> and...@polkaspots.com> wrote:
>>>>>
>>>>>> Then it hasent been generated.
>>>>>>
>>>>>> Try :
>>>>>>
>>>>>> Do a make dirclean
>>>>>>
>>>>>> Change this :
>>>>>>
>>>>>> Modify target/linux/ar71xx/image/Makefile:
>>>>>>
>>>>>> +$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO
>>>>>> UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI
>>>>>> UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO))
>>>>>> $(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800
>>>>>> WNDRMAC WNDRMACV2))
>>>>>> $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
>>>>>> $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
>>>>>>
>>>>>> do a make kernel_menuconfig
>>>>>> exit without doing anything
>>>>>> cd build_dir
>>>>>> find | grep m25p80.c
>>>>>> should show up something in drivers/mtd/devices/
>>>>>> add the patch in
>>>>>> +++ m25p80.c 2014-04-05 00:27:58.000000000 +0000
>>>>>> @@ -677,6 +677,8 @@
>>>>>> { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
>>>>>> { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
>>>>>> { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
>>>>>> + { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
>>>>>>
>>>>>> /* Everspin */
>>>>>> { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
>>>>>>
>>>>>> and then do a make again.
>>>>>> It should generate it fine.
>>>>>>
>>>>>>
>>>>>> On 13/06/14 11:31, Outback Dingo wrote:
>>>>>>
>>>>>> ive applied the patches but its not building that specific image
>>>>>>
>>>>>>
>>>>>> On Fri, Jun 13, 2014 at 8:30 PM, and...@polkaspots.com <
>>>>>> and...@polkaspots.com> wrote:
>>>>>>
>>>>>>> Ah that’s wrong, you need to have one called
>>>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin not
>>>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin, the
>>>>>>> firmware check is different.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 13/06/14 11:29, Outback Dingo wrote:
>>>>>>>
>>>>>>> somethings odd here.... would you have an image i can test ??
>>>>>>>
>>>>>>> tftp> bin
>>>>>>> tftp> timeout 120
>>>>>>> tftp> put
>>>>>>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
>>>>>>> Error code 2: Firmware check failed
>>>>>>> Sent 6356992 bytes in 9.7 seconds
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jun 13, 2014 at 8:27 PM, and...@polkaspots.com <
>>>>>>> and...@polkaspots.com> wrote:
>>>>>>>
>>>>>>>> Hi there,
>>>>>>>>
>>>>>>>> I have one as well and managed to put the firmware on using his
>>>>>>>> patch.
>>>>>>>> Now i'm just trying to wrap my head around how quilt works.
>>>>>>>>
>>>>>>>> Will update you as soon as I have something.
>>>>>>>> By the way, is this the correct way to reply to this patchworks
>>>>>>>> digest?
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
