Oh, sorry I think is actually my bad, I didn’t paste everything, grrr
target/linux/ar71xx/image/Makefile:
$(eval $(call
SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
+$(eval $(call
SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-U20,ttyS0,115200,BZ,BZ,ar7240))
On 13/06/14 12:42, Outback Dingo wrote:
seriously..... i did it even exactly as you stated and still no
joy..........
and ive been using/developing on WRT for 6+ years.... Grrrrrrr what
did i miss
-rw-r--r-- 1 dingo dingo 5636096 Jun 13 21:37
openwrt-ar71xx-generic-root.squashfs
-rw-r--r-- 1 dingo dingo 5308420 Jun 13 21:37
openwrt-ar71xx-generic-root.squashfs-64k
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-airrouter-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-rspro-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-rspro-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-rs-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-rs-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6881628 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6881284 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-unifi-squashfs-factory.bin
-rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
openwrt-ar71xx-generic-ubnt-unifi-squashfs-sysupgrade.bin
-rw-r--r-- 1 dingo dingo 1425844 Jun 13 21:37
openwrt-ar71xx-generic-uImage-gzip.bin
-rw-r--r-- 1 dingo dingo 1034289 Jun 13 21:37
openwrt-ar71xx-generic-uImage-lzma.bin
On Fri, Jun 13, 2014 at 8:48 PM, and...@polkaspots.com
<and...@polkaspots.com <mailto:and...@polkaspots.com>> wrote:
Ubiquiti all, The outdoor+ profile is not defined, so it will call
the normal Outdoor if you select that one.
On 13/06/14 11:47, Outback Dingo wrote:
Your building target for Ubiquiti all ? or UniFi OutDoor ?
On Fri, Jun 13, 2014 at 8:35 PM, and...@polkaspots.com
<mailto:and...@polkaspots.com> <and...@polkaspots.com
<mailto:and...@polkaspots.com>> wrote:
Then it hasent been generated.
Try :
Do a make dirclean
Change this :
Modify target/linux/ar71xx/image/Makefile:
+$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO
UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI
UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO))
$(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800
WNDRMAC WNDRMACV2))
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M
WP543_16M))
do a make kernel_menuconfig
exit without doing anything
cd build_dir
find | grep m25p80.c
should show up something in drivers/mtd/devices/
add the patch in
+++ m25p80.c 2014-04-05 00:27:58.000000000 +0000
@@ -677,6 +677,8 @@
{ "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
{ "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
/* Everspin */
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
and then do a make again.
It should generate it fine.
On 13/06/14 11:31, Outback Dingo wrote:
ive applied the patches but its not building that specific image
On Fri, Jun 13, 2014 at 8:30 PM, and...@polkaspots.com
<mailto:and...@polkaspots.com> <and...@polkaspots.com
<mailto:and...@polkaspots.com>> wrote:
Ah that’s wrong, you need to have one called
openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin
not
openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin,
the firmware check is different.
On 13/06/14 11:29, Outback Dingo wrote:
somethings odd here.... would you have an image i can
test ??
tftp> bin
tftp> timeout 120
tftp> put
openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
Error code 2: Firmware check failed
Sent 6356992 bytes in 9.7 seconds
On Fri, Jun 13, 2014 at 8:27 PM, and...@polkaspots.com
<mailto:and...@polkaspots.com> <and...@polkaspots.com
<mailto:and...@polkaspots.com>> wrote:
Hi there,
I have one as well and managed to put the firmware
on using his patch.
Now i'm just trying to wrap my head around how
quilt works.
Will update you as soon as I have something.
By the way, is this the correct way to reply to
this patchworks digest?
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
