Do you have a serial console?
Plug the main directly in to your network and do an arp scan for the mac.

On 13/06/14 13:06, Outback Dingo wrote:
Shoot..... its not coming up....... after the tftp it was flashing white blue white blue white blue for a bit then stopped.....

doesnt seem to be doing much....... cant ping 192.168.1.1 from my host........ hrmmmmm.... should i unplug plug it back in


On Fri, Jun 13, 2014 at 10:05 PM, and...@polkaspots.com <and...@polkaspots.com <mailto:and...@polkaspots.com>> wrote:

    Great!
    I was confused about the Tx-Power: 18 dBm but that makes sense, as
    it has 2 x 5dBi passive gain antennas. So the total will actually
    be 28. Powerful little one.


    On 13/06/14 12:53, Outback Dingo wrote:
    tftp> put
    openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin
    Sent 6881628 bytes in 4.0 seconds


    FINALLY.....


    On Fri, Jun 13, 2014 at 9:49 PM, Outback Dingo
    <outbackdi...@gmail.com <mailto:outbackdi...@gmail.com>> wrote:

        yeah i just noticed that you dropped that from the initial
        patch, caught it fixed it and now i have an image.

        its been too long, need more coffee.......... but
        Thanks....... always something simple


        On Fri, Jun 13, 2014 at 9:46 PM, and...@polkaspots.com
        <mailto:and...@polkaspots.com> <and...@polkaspots.com
        <mailto:and...@polkaspots.com>> wrote:

            Oh, sorry I think is actually my bad, I didn’t paste
            everything, grrr


            target/linux/ar71xx/image/Makefile:


              $(eval $(call 
SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
            +$(eval $(call 
SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-U20,ttyS0,115200,BZ,BZ,ar7240))


            On 13/06/14 12:42, Outback Dingo wrote:
            seriously..... i did it even exactly as you stated and
            still no joy..........

            and ive been using/developing on WRT for 6+ years....
            Grrrrrrr what did i miss
            -rw-r--r-- 1 dingo dingo 5636096 Jun 13 21:37
            openwrt-ar71xx-generic-root.squashfs
            -rw-r--r-- 1 dingo dingo 5308420 Jun 13 21:37
            openwrt-ar71xx-generic-root.squashfs-64k
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-airrouter-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-ls-sr71-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-nano-m-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-rocket-m-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-rspro-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-rspro-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-rs-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6488064 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-rs-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6881628 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6881284 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-uap-pro-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 6357404 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-unifi-squashfs-factory.bin
            -rw-r--r-- 1 dingo dingo 6356996 Jun 13 21:37
            openwrt-ar71xx-generic-ubnt-unifi-squashfs-sysupgrade.bin
            -rw-r--r-- 1 dingo dingo 1425844 Jun 13 21:37
            openwrt-ar71xx-generic-uImage-gzip.bin
            -rw-r--r-- 1 dingo dingo 1034289 Jun 13 21:37
            openwrt-ar71xx-generic-uImage-lzma.bin




            On Fri, Jun 13, 2014 at 8:48 PM, and...@polkaspots.com
            <mailto:and...@polkaspots.com> <and...@polkaspots.com
            <mailto:and...@polkaspots.com>> wrote:

                Ubiquiti all, The outdoor+ profile is not defined,
                so it will call the normal Outdoor if you select
                that one.



                On 13/06/14 11:47, Outback Dingo wrote:
                Your building target for Ubiquiti all ? or UniFi
                OutDoor ?


                On Fri, Jun 13, 2014 at 8:35 PM,
                and...@polkaspots.com
                <mailto:and...@polkaspots.com>
                <and...@polkaspots.com
                <mailto:and...@polkaspots.com>> wrote:

                    Then it hasent been generated.

                    Try :

                    Do a make dirclean

                    Change this :

                    Modify target/linux/ar71xx/image/Makefile:

                    +$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS 
UBNTRSPRO
                    UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI
                    UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO))
                      $(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 
WNDR3800
                    WNDRMAC WNDRMACV2))
                      $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
                      $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M 
WP543_8M WP543_16M))

                    do a make kernel_menuconfig
                    exit without doing anything
                    cd build_dir
                    find | grep m25p80.c
                    should show up something in drivers/mtd/devices/
                    add the patch in
                    +++ m25p80.c    2014-04-05 00:27:58.000000000 +0000
                    @@ -677,6 +677,8 @@
                          { "en25q32b", INFO(0x1c3016, 0, 64 * 1024,  64, 0) },
                          { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
                          { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, 
SECT_4K) },
                    +    { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },

                          /* Everspin */
                          { "mr25h256", CAT25_INFO(  32 * 1024, 1, 256, 2) },

                    and then do a make again.
                    It should generate it fine.


                    On 13/06/14 11:31, Outback Dingo wrote:
                    ive applied the patches but its not building
                    that specific image


                    On Fri, Jun 13, 2014 at 8:30 PM,
                    and...@polkaspots.com
                    <mailto:and...@polkaspots.com>
                    <and...@polkaspots.com
                    <mailto:and...@polkaspots.com>> wrote:

                        Ah that’s wrong, you need to have one
                        called
                        
openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin
                        not
                        
openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin,
                        the firmware check is different.



                        On 13/06/14 11:29, Outback Dingo wrote:
                        somethings odd here.... would you have an
                        image i can test ??

                        tftp> bin
                        tftp> timeout 120
                        tftp> put
                        
openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
                        Error code 2: Firmware check failed
                        Sent 6356992 bytes in 9.7 seconds



                        On Fri, Jun 13, 2014 at 8:27 PM,
                        and...@polkaspots.com
                        <mailto:and...@polkaspots.com>
                        <and...@polkaspots.com
                        <mailto:and...@polkaspots.com>> wrote:

                            Hi there,

                            I have one as well and managed to put
                            the firmware on using his patch.
                            Now i'm just trying to wrap my head
                            around how quilt works.

                            Will update you as soon as I have
                            something.
                            By the way, is this the correct way
                            to reply to this patchworks digest?














_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to