Your building target for Ubiquiti all ? or UniFi OutDoor ?
On Fri, Jun 13, 2014 at 8:35 PM, and...@polkaspots.com <
and...@polkaspots.com> wrote:
> Then it hasent been generated.
>
> Try :
>
> Do a make dirclean
>
> Change this :
>
> Modify target/linux/ar71xx/image/Makefile:
>
> +$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO
> UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTUNIFI
> UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO))
> $(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800
> WNDRMAC WNDRMACV2))
> $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
> $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
>
> do a make kernel_menuconfig
> exit without doing anything
> cd build_dir
> find | grep m25p80.c
> should show up something in drivers/mtd/devices/
> add the patch in
> +++ m25p80.c 2014-04-05 00:27:58.000000000 +0000
> @@ -677,6 +677,8 @@
> { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
> { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
> { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
> + { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
>
> /* Everspin */
> { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
>
> and then do a make again.
> It should generate it fine.
>
>
> On 13/06/14 11:31, Outback Dingo wrote:
>
> ive applied the patches but its not building that specific image
>
>
> On Fri, Jun 13, 2014 at 8:30 PM, and...@polkaspots.com <
> and...@polkaspots.com> wrote:
>
>> Ah that’s wrong, you need to have one called
>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin not
>> openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin, the
>> firmware check is different.
>>
>>
>>
>> On 13/06/14 11:29, Outback Dingo wrote:
>>
>> somethings odd here.... would you have an image i can test ??
>>
>> tftp> bin
>> tftp> timeout 120
>> tftp> put openwrt-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin
>> Error code 2: Firmware check failed
>> Sent 6356992 bytes in 9.7 seconds
>>
>>
>>
>> On Fri, Jun 13, 2014 at 8:27 PM, and...@polkaspots.com <
>> and...@polkaspots.com> wrote:
>>
>>> Hi there,
>>>
>>> I have one as well and managed to put the firmware on using his patch.
>>> Now i'm just trying to wrap my head around how quilt works.
>>>
>>> Will update you as soon as I have something.
>>> By the way, is this the correct way to reply to this patchworks digest?
>>>
>>
>>
>>
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
