Hi Jon,
I don't know what you mean with "default 'off' state", but I'm using an
RT3052F SoC and I have to explicitly specify the the pvid for the port in
vlan 2 to make it work properly. I think this is usual. From
http://wiki.openwrt.org/doc/uci/network/switch :
"Tagged packets received on a port will be directed to the VLAN indicated
by the VID contained in the packet. Untagged packets received on a port
will be directed to the default port VLAN (usually called the PVID). A
separate config switch_port section is required to set the default port
VLAN."
So you should add this to your config:
config 'switch_port'
option 'port' '0'
option 'pvid' '2'
I hope it helps.
Regards,
Diego
On Thu, Sep 19, 2013 at 4:21 PM, jonsm...@gmail.com <jonsm...@gmail.com>wrote:
> Has anyone tried using the Ethernet switch on Ralink lately? I don't
> believe it is working correctly in the default 'off' state. The
> failure is that the Ralink CPU can't receive any packets from Ethernet
> (or those packet are corrupted by the VLAN tag).
>
> If I enable the switch it works properly. I'm seeing this on the
> RT5350 but the code is generic to all Ralink
>
> diff --git a/files/etc/config/network b/files/etc/config/network
> new file mode 100644
> index 0000000..c608d0e
> --- /dev/null
> +++ b/files/etc/config/network
> @@ -0,0 +1,39 @@
> +config interface 'loopback'
> + option ifname 'lo'
> + option proto 'static'
> + option ipaddr '127.0.0.1'
> + option netmask '255.0.0.0'
> +
> +config globals 'globals'
> + option ula_prefix 'fd59:3f8d:cb3a::/48'
> +
> +config interface 'lan'
> + option ifname 'eth0.1'
> + option type 'bridge'
> + option proto 'static'
> + option ipaddr '192.168.1.85'
> + option netmask '255.255.255.0'
> + option ip6assign '60'
> +
> +config interface 'wan'
> + option ifname 'eth0.2'
> + option proto 'dhcp'
> +
> +config interface 'wan6'
> + option ifname '@wan'
> + option proto 'dhcpv6'
> +
> +config switch
> + option name 'rt305x'
> + option reset '1'
> + option enable_vlan '1'
> +
> +config switch_vlan
> + option device 'rt305x'
> + option vlan '1'
> + option ports '1 2 3 4 6t'
> +
> +config switch_vlan
> + option device 'rt305x'
> + option vlan '2'
> + option ports '0 6t'
>
> --
> Jon Smirl
> jonsm...@gmail.com
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
