Has anyone tried using the Ethernet switch on Ralink lately? I don't believe it is working correctly in the default 'off' state. The failure is that the Ralink CPU can't receive any packets from Ethernet (or those packet are corrupted by the VLAN tag).
If I enable the switch it works properly. I'm seeing this on the RT5350 but the code is generic to all Ralink diff --git a/files/etc/config/network b/files/etc/config/network new file mode 100644 index 0000000..c608d0e --- /dev/null +++ b/files/etc/config/network @@ -0,0 +1,39 @@ +config interface 'loopback' + option ifname 'lo' + option proto 'static' + option ipaddr '127.0.0.1' + option netmask '255.0.0.0' + +config globals 'globals' + option ula_prefix 'fd59:3f8d:cb3a::/48' + +config interface 'lan' + option ifname 'eth0.1' + option type 'bridge' + option proto 'static' + option ipaddr '192.168.1.85' + option netmask '255.255.255.0' + option ip6assign '60' + +config interface 'wan' + option ifname 'eth0.2' + option proto 'dhcp' + +config interface 'wan6' + option ifname '@wan' + option proto 'dhcpv6' + +config switch + option name 'rt305x' + option reset '1' + option enable_vlan '1' + +config switch_vlan + option device 'rt305x' + option vlan '1' + option ports '1 2 3 4 6t' + +config switch_vlan + option device 'rt305x' + option vlan '2' + option ports '0 6t' -- Jon Smirl jonsm...@gmail.com _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
