Hi Wiz Le dimanche 23 mars 2008, RHS Linux User a écrit : > From what I can tell, however, the kernel and modules are not (from > what I can tell) being compiled for MIPS1 but rather for MIPS32? This MAY > be the reason I have yet to see any boot up serial output? I have yet to > find the right place to modify in the build tree to get MIPS1 kernel and > module compilation? Suggestions please....
If your kernel is correctly compiled for MIPS-1, you should be able to see it running on your FPGA. Are you sure the IP cores (UART, DDRAM ...) are working fine ? Most of the time problems come from here, but I am sure you did validate all the cores. From the OpenWrt perspective, if you did change the CFLAGS to match the MIPS-1 instruction set in toolchain/Config.in when selecting your architecture, those CFLAGS will be passed to the kernel and so will the modules be compiled with. > > I would GREATLY appreciate any other suggestions any of you might have > as to how you did your port, etc. Maybe there is another version that is > already known to run on R3000? This would, I suspect, make my port MUCH > easier. There is currently no OpenWrt port on the MIPS R3K architecture. -- Best regards, Florian Fainelli Email : [EMAIL PROTECTED] http://openwrt.org -------------------------------
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
