No I still have that error. Other than that I don't see any other errors. On Wed, Apr 20, 2016 at 9:22 AM, Eugen Block <ebl...@nde.ag> wrote:
> So I guess the mentioned error should be resolved? Does it work now? > > > > Zitat von Paras pradhan <pradhanpa...@gmail.com>: > > Yes I I have it set up in nova.conf and neutron.conf >> >> On Wed, Apr 20, 2016 at 9:11 AM, Eugen Block <ebl...@nde.ag> wrote: >> >> And did you change it to auth_type instead of auth_plugin? Also you should >>> make sure that this option is in the correct section of your config file, >>> for example >>> >>> [keystone_authtoken] >>> ... >>> auth_type = password >>> >>> or >>> >>> [neutron] >>> ... >>> auth_type = password >>> >>> >>> Regards, >>> Eugen >>> >>> >>> Zitat von Paras pradhan <pradhanpa...@gmail.com>: >>> >>> Hi Eugen, >>> >>>> >>>> Thanks. Log says its an error. Here is the full log. >>>> http://pastebin.com/K1f4pJhB >>>> >>>> -Paras. >>>> >>>> On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <ebl...@nde.ag> wrote: >>>> >>>> Hi Paras, >>>> >>>>> >>>>> the option auth_plugin is deprecated (from nova.conf): >>>>> >>>>> ---cut here--- >>>>> # Authentication type to load (unknown value) >>>>> # Deprecated group/name - [DEFAULT]/auth_plugin >>>>> auth_type = password >>>>> ---cut here--- >>>>> >>>>> But as far as I can tell, you should only get a warning, not an error, >>>>> I've seen some of these warnings in my logs, but it works (I work with >>>>> openSUSE). To get Mitaka working at all I simply tried to set the same >>>>> options as in my working Liberty configs, and then I searched for >>>>> deprecation warnings and additional options mentioned in the Mitaka >>>>> guide. >>>>> >>>>> Hope this helps! >>>>> >>>>> Regards, >>>>> Eugen >>>>> >>>>> >>>>> Zitat von Paras pradhan <pradhanpa...@gmail.com>: >>>>> >>>>> >>>>> Can somebody share the nova.conf and neutron.conf from working mitaka? >>>>> I >>>>> am >>>>> >>>>> also following the same guide and ran into a problem. >>>>>> >>>>>> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions >>>>>> NoSuchOptError: no such option in group neutron: auth_plugin >>>>>> >>>>>> Not sure what did I do wrong. It was while launching an instance. >>>>>> >>>>>> >>>>>> Thanks >>>>>> >>>>>> Paras. >>>>>> >>>>>> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood < >>>>>> nasir.mahm...@gmail.com >>>>>> > >>>>>> wrote: >>>>>> >>>>>> Martinx, >>>>>> >>>>>> >>>>>>> glad to see that you are able to dig into the typo issue. I >>>>>>> remember, I >>>>>>> had to completely re-re-clean install my virtual setup of OpenStack >>>>>>> for a >>>>>>> POC back in 2015 , just because I have had miss-configured my >>>>>>> neutron.conf's mysql DB connector information. >>>>>>> >>>>>>> Cheers! >>>>>>> >>>>>>> >>>>>>> Regards, >>>>>>> Nasir Mahmood >>>>>>> >>>>>>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ < >>>>>>> thiagocmarti...@gmail.com> wrote: >>>>>>> >>>>>>> FIXED!! I knew it was a typo somewhere! LOL >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02 >>>>>>>> >>>>>>>> Thank you guys! >>>>>>>> >>>>>>>> Sorry about the buzz on TWO mail lists... >>>>>>>> >>>>>>>> At least, now we know that Nova silent fail on its start up, if >>>>>>>> somethings aren't configured according... And there is no >>>>>>>> verification >>>>>>>> steps to test the communication between Nova and Neutron. >>>>>>>> >>>>>>>> Mitaka is working now on Xenial! YAY!! >>>>>>>> >>>>>>>> I'm about to commit changes to enable OpenvSwitch with DPDK and >>>>>>>> multi-node deployments, fully automated! >>>>>>>> >>>>>>>> Cheers! >>>>>>>> Thiago >>>>>>>> >>>>>>>> On 17 April 2016 at 21:26, Martinx - ジェームズ < >>>>>>>> thiagocmarti...@gmail.com >>>>>>>> > >>>>>>>> wrote: >>>>>>>> >>>>>>>> On 17 April 2016 at 17:39, Martinx - ジェームズ < >>>>>>>> thiagocmarti...@gmail.com >>>>>>>> > >>>>>>>> >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Guys, >>>>>>>>> >>>>>>>>> >>>>>>>>>> I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using >>>>>>>>>> the >>>>>>>>>> following document: >>>>>>>>>> >>>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu >>>>>>>>>> >>>>>>>>>> Yes, I know, the above document is for installing Mitaka on top >>>>>>>>>> of >>>>>>>>>> Ubuntu 14.04 but, from what I understand, the only difference is >>>>>>>>>> that >>>>>>>>>> on >>>>>>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive, >>>>>>>>>> since >>>>>>>>>> Mitaka is the default on Xenial, so, I can follow that document, >>>>>>>>>> right? >>>>>>>>>> =) >>>>>>>>>> >>>>>>>>>> At first, OpenStack installation goes okay, without any errors, >>>>>>>>>> all >>>>>>>>>> services comes up, etc... However, it is not possible to launch an >>>>>>>>>> Instance. >>>>>>>>>> >>>>>>>>>> *** Errors on launching the Instance: >>>>>>>>>> >>>>>>>>>> - Right after launching it: >>>>>>>>>> >>>>>>>>>> https://paste.ubuntu.com/15902503/ >>>>>>>>>> >>>>>>>>>> - Spawning it, after Glance finishes the download, similar error >>>>>>>>>> a >>>>>>>>>> second time: >>>>>>>>>> >>>>>>>>>> https://paste.ubuntu.com/15902556/ >>>>>>>>>> >>>>>>>>>> What am I missing? >>>>>>>>>> >>>>>>>>>> Apparently, Nova is not authorized to talk with Neutron but, I am >>>>>>>>>> following the docs (maybe it is just a typo somewhere?)... >>>>>>>>>> >>>>>>>>>> Also, I have an Ansible automation to deploy it, so, it is less >>>>>>>>>> error >>>>>>>>>> prone. And however can help me, will see how I am deploying it. >>>>>>>>>> >>>>>>>>>> I see no error on Admin Dashboard, all services are up. >>>>>>>>>> >>>>>>>>>> NOTE: My Ansible playbooks is in a sense, " >>>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully automated", >>>>>>>>>> it >>>>>>>>>> is >>>>>>>>>> very close to it, step-by-step. >>>>>>>>>> >>>>>>>>>> How can I debug this? I mean, how can I try to do, what Nova is >>>>>>>>>> doing >>>>>>>>>> (its connection with Neutron), to make sure that the settings are >>>>>>>>>> in >>>>>>>>>> place >>>>>>>>>> correctly? >>>>>>>>>> >>>>>>>>>> Here is how I am installing Mitaka on Xenial: >>>>>>>>>> >>>>>>>>>> --- >>>>>>>>>> 1- Install Ubuntu 16.04 server 64-bit on bare-metal; >>>>>>>>>> >>>>>>>>>> * Configure your /etc/hostname and /etc/hosts. >>>>>>>>>> >>>>>>>>>> DETAILS: >>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2- Clone the automation: >>>>>>>>>> >>>>>>>>>> cd ~ >>>>>>>>>> git clone https://github.com/tmartinx/svauto.git >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 3- Run the automation to install OpenStack (all-in-one) >>>>>>>>>> >>>>>>>>>> cd ~/svauto >>>>>>>>>> >>>>>>>>>> ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16 >>>>>>>>>> --base-os-upgrade=yes --openstack-release=mitaka >>>>>>>>>> --openstack-installation >>>>>>>>>> --dry-run >>>>>>>>>> >>>>>>>>>> ansible-playbook -c local site-openstack.yml --extra-vars >>>>>>>>>> "openstack_installation=yes" >>>>>>>>>> --- >>>>>>>>>> >>>>>>>>>> NOTE: If you don't use "--dry-run" option, Ansible will be >>>>>>>>>> executed >>>>>>>>>> automatically by "os-deploy.sh". >>>>>>>>>> >>>>>>>>>> I am sharing the Ansible playbooks, because it will be easier to >>>>>>>>>> see >>>>>>>>>> what I am doing. >>>>>>>>>> >>>>>>>>>> About the relevant configuration blocks, I believe that I have it >>>>>>>>>> properly configured (I followed Mitaka docs), like this: >>>>>>>>>> >>>>>>>>>> * neutron.conf: >>>>>>>>>> - >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf >>>>>>>>>> - >>>>>>>>>> >>>>>>>>>> * nova.conf: >>>>>>>>>> - >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf >>>>>>>>>> - >>>>>>>>>> >>>>>>>>>> I already installed OpenStack many, many, many times, since >>>>>>>>>> Havana >>>>>>>>>> release, I'm confident that I am doing it right but, of course, >>>>>>>>>> maybe >>>>>>>>>> I did >>>>>>>>>> something wrong this time... =P >>>>>>>>>> >>>>>>>>>> I appreciate any help! >>>>>>>>>> >>>>>>>>>> Thanks! >>>>>>>>>> Thiago >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hey guys, >>>>>>>>>> >>>>>>>>> >>>>>>>>> I am reviewing everything, to make sure that my automation matches >>>>>>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details. >>>>>>>>> >>>>>>>>> Two things... >>>>>>>>> >>>>>>>>> --- >>>>>>>>> 1- All the verification steps (from official doc) passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html >>>>>>>>> - passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html >>>>>>>>> - passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html >>>>>>>>> - passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html >>>>>>>>> - passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html >>>>>>>>> - passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html >>>>>>>>> - passed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html >>>>>>>>> - passed (mine doesn't have /horizon) >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html >>>>>>>>> - passed but, I'm not using any cinder-volume yet >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html >>>>>>>>> - "6. Launch the instance" - FAIL >>>>>>>>> >>>>>>>>> NOTE: I can create Networks, Subnets, Routers... I can see the >>>>>>>>> Linux >>>>>>>>> Namespaces at the Neutron L3 Router (All-in-One) >>>>>>>>> >>>>>>>>> >>>>>>>>> 2- This problem happen no matter if deploying it with Linux >>>>>>>>> Bridges >>>>>>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS) >>>>>>>>> --- >>>>>>>>> >>>>>>>>> So, I think that OpenStack should provide more verification steps, >>>>>>>>> specially to test the communication / authentication between its >>>>>>>>> different >>>>>>>>> projects, for example: >>>>>>>>> >>>>>>>>> A- Does Nova can communicate with Neutron? How to test this? >>>>>>>>> >>>>>>>>> B- Can Nova download images from Glance? Etc... >>>>>>>>> >>>>>>>>> >>>>>>>>> Doing more reviews now... >>>>>>>>> >>>>>>>>> >>>>>>>>> Cheers! >>>>>>>>> Thiago >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>> Mailing list: >>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>>> Post to : openstack@lists.openstack.org >>>>>>>> Unsubscribe : >>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> Nasir Mahmood >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Mailing list: >>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>> Post to : openstack@lists.openstack.org >>>>>>> Unsubscribe : >>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>> -- >>>>> Eugen Block voice : +49-40-559 51 75 >>>>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 >>>>> Postfach 61 03 15 >>>>> D-22423 Hamburg e-mail : ebl...@nde.ag >>>>> >>>>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen >>>>> Sitz und Registergericht: Hamburg, HRB 90934 >>>>> Vorstand: Jens-U. Mozdzen >>>>> USt-IdNr. DE 814 013 983 >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Mailing list: >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>> Post to : openstack@lists.openstack.org >>>>> Unsubscribe : >>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>> >>>>> >>>>> >>> >>> -- >>> Eugen Block voice : +49-40-559 51 75 >>> NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 >>> Postfach 61 03 15 >>> D-22423 Hamburg e-mail : ebl...@nde.ag >>> >>> Vorsitzende des Aufsichtsrates: Angelika Mozdzen >>> Sitz und Registergericht: Hamburg, HRB 90934 >>> Vorstand: Jens-U. Mozdzen >>> USt-IdNr. DE 814 013 983 >>> >>> >>> > > > -- > Eugen Block voice : +49-40-559 51 75 > NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 > Postfach 61 03 15 > D-22423 Hamburg e-mail : ebl...@nde.ag > > Vorsitzende des Aufsichtsrates: Angelika Mozdzen > Sitz und Registergericht: Hamburg, HRB 90934 > Vorstand: Jens-U. Mozdzen > USt-IdNr. DE 814 013 983 > >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
