Hi Eugen, Thanks. Log says its an error. Here is the full log. http://pastebin.com/K1f4pJhB
-Paras. On Tue, Apr 19, 2016 at 2:05 AM, Eugen Block <ebl...@nde.ag> wrote: > Hi Paras, > > the option auth_plugin is deprecated (from nova.conf): > > ---cut here--- > # Authentication type to load (unknown value) > # Deprecated group/name - [DEFAULT]/auth_plugin > auth_type = password > ---cut here--- > > But as far as I can tell, you should only get a warning, not an error, > I've seen some of these warnings in my logs, but it works (I work with > openSUSE). To get Mitaka working at all I simply tried to set the same > options as in my working Liberty configs, and then I searched for > deprecation warnings and additional options mentioned in the Mitaka guide. > > Hope this helps! > > Regards, > Eugen > > > Zitat von Paras pradhan <pradhanpa...@gmail.com>: > > > Can somebody share the nova.conf and neutron.conf from working mitaka? I am >> also following the same guide and ran into a problem. >> >> 2016-04-18 16:51:07.982 2447 ERROR nova.api.openstack.extensions >> NoSuchOptError: no such option in group neutron: auth_plugin >> >> Not sure what did I do wrong. It was while launching an instance. >> >> >> Thanks >> >> Paras. >> >> On Mon, Apr 18, 2016 at 2:46 AM, Nasir Mahmood <nasir.mahm...@gmail.com> >> wrote: >> >> Martinx, >>> >>> glad to see that you are able to dig into the typo issue. I remember, I >>> had to completely re-re-clean install my virtual setup of OpenStack for a >>> POC back in 2015 , just because I have had miss-configured my >>> neutron.conf's mysql DB connector information. >>> >>> Cheers! >>> >>> >>> Regards, >>> Nasir Mahmood >>> >>> On Mon, Apr 18, 2016 at 7:02 AM, Martinx - ジェームズ < >>> thiagocmarti...@gmail.com> wrote: >>> >>> FIXED!! I knew it was a typo somewhere! LOL >>>> >>>> >>>> >>>> https://github.com/tmartinx/svauto/commit/40ce6566cd0e6435cf75bb34116b6c3bacbeaf02 >>>> >>>> Thank you guys! >>>> >>>> Sorry about the buzz on TWO mail lists... >>>> >>>> At least, now we know that Nova silent fail on its start up, if >>>> somethings aren't configured according... And there is no verification >>>> steps to test the communication between Nova and Neutron. >>>> >>>> Mitaka is working now on Xenial! YAY!! >>>> >>>> I'm about to commit changes to enable OpenvSwitch with DPDK and >>>> multi-node deployments, fully automated! >>>> >>>> Cheers! >>>> Thiago >>>> >>>> On 17 April 2016 at 21:26, Martinx - ジェームズ <thiagocmarti...@gmail.com> >>>> wrote: >>>> >>>> On 17 April 2016 at 17:39, Martinx - ジェームズ <thiagocmarti...@gmail.com> >>>>> wrote: >>>>> >>>>> Guys, >>>>>> >>>>>> I am trying to deploy Mitaka, on top of Ubuntu 16.04, by using the >>>>>> following document: >>>>>> >>>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu >>>>>> >>>>>> Yes, I know, the above document is for installing Mitaka on top of >>>>>> Ubuntu 14.04 but, from what I understand, the only difference is that >>>>>> on >>>>>> Xenial, there is no need to add the Ubuntu Mitaka Cloud Archive, since >>>>>> Mitaka is the default on Xenial, so, I can follow that document, >>>>>> right? >>>>>> =) >>>>>> >>>>>> At first, OpenStack installation goes okay, without any errors, all >>>>>> services comes up, etc... However, it is not possible to launch an >>>>>> Instance. >>>>>> >>>>>> *** Errors on launching the Instance: >>>>>> >>>>>> - Right after launching it: >>>>>> >>>>>> https://paste.ubuntu.com/15902503/ >>>>>> >>>>>> - Spawning it, after Glance finishes the download, similar error a >>>>>> second time: >>>>>> >>>>>> https://paste.ubuntu.com/15902556/ >>>>>> >>>>>> What am I missing? >>>>>> >>>>>> Apparently, Nova is not authorized to talk with Neutron but, I am >>>>>> following the docs (maybe it is just a typo somewhere?)... >>>>>> >>>>>> Also, I have an Ansible automation to deploy it, so, it is less error >>>>>> prone. And however can help me, will see how I am deploying it. >>>>>> >>>>>> I see no error on Admin Dashboard, all services are up. >>>>>> >>>>>> NOTE: My Ansible playbooks is in a sense, " >>>>>> docs.openstack.org/mitaka/install-guide-ubuntu fully automated", it >>>>>> is >>>>>> very close to it, step-by-step. >>>>>> >>>>>> How can I debug this? I mean, how can I try to do, what Nova is doing >>>>>> (its connection with Neutron), to make sure that the settings are in >>>>>> place >>>>>> correctly? >>>>>> >>>>>> Here is how I am installing Mitaka on Xenial: >>>>>> >>>>>> --- >>>>>> 1- Install Ubuntu 16.04 server 64-bit on bare-metal; >>>>>> >>>>>> * Configure your /etc/hostname and /etc/hosts. >>>>>> >>>>>> DETAILS: >>>>>> https://github.com/tmartinx/svauto/blob/dev/README.OpenStack.md >>>>>> >>>>>> >>>>>> 2- Clone the automation: >>>>>> >>>>>> cd ~ >>>>>> git clone https://github.com/tmartinx/svauto.git >>>>>> >>>>>> >>>>>> 3- Run the automation to install OpenStack (all-in-one) >>>>>> >>>>>> cd ~/svauto >>>>>> >>>>>> ./os-deploy.sh --br-mode=LBR --use-dummies --base-os=ubuntu16 >>>>>> --base-os-upgrade=yes --openstack-release=mitaka >>>>>> --openstack-installation >>>>>> --dry-run >>>>>> >>>>>> ansible-playbook -c local site-openstack.yml --extra-vars >>>>>> "openstack_installation=yes" >>>>>> --- >>>>>> >>>>>> NOTE: If you don't use "--dry-run" option, Ansible will be executed >>>>>> automatically by "os-deploy.sh". >>>>>> >>>>>> I am sharing the Ansible playbooks, because it will be easier to see >>>>>> what I am doing. >>>>>> >>>>>> About the relevant configuration blocks, I believe that I have it >>>>>> properly configured (I followed Mitaka docs), like this: >>>>>> >>>>>> * neutron.conf: >>>>>> - >>>>>> >>>>>> >>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_neutron_aio/templates/mitaka/neutron.conf >>>>>> - >>>>>> >>>>>> * nova.conf: >>>>>> - >>>>>> >>>>>> >>>>>> https://github.com/tmartinx/svauto/blob/dev/ansible/roles/os_nova_aio/templates/mitaka/nova.conf >>>>>> - >>>>>> >>>>>> I already installed OpenStack many, many, many times, since Havana >>>>>> release, I'm confident that I am doing it right but, of course, maybe >>>>>> I did >>>>>> something wrong this time... =P >>>>>> >>>>>> I appreciate any help! >>>>>> >>>>>> Thanks! >>>>>> Thiago >>>>>> >>>>>> >>>>> Hey guys, >>>>> >>>>> I am reviewing everything, to make sure that my automation matches >>>>> docs.openstack.org/mitaka/install-guide-ubuntu/ in details. >>>>> >>>>> Two things... >>>>> >>>>> --- >>>>> 1- All the verification steps (from official doc) passed >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-verify.html >>>>> - passed >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/keystone-openrc.html >>>>> - passed >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/glance-verify.html >>>>> - passed >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/nova-verify.html >>>>> - passed >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify.html >>>>> - passed >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/neutron-verify-option2.html >>>>> - passed >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/horizon-verify.html >>>>> - passed (mine doesn't have /horizon) >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/cinder-verify.html >>>>> - passed but, I'm not using any cinder-volume yet >>>>> >>>>> >>>>> >>>>> http://docs.openstack.org/mitaka/install-guide-ubuntu/launch-instance-selfservice.html >>>>> - "6. Launch the instance" - FAIL >>>>> >>>>> NOTE: I can create Networks, Subnets, Routers... I can see the Linux >>>>> Namespaces at the Neutron L3 Router (All-in-One) >>>>> >>>>> >>>>> 2- This problem happen no matter if deploying it with Linux Bridges >>>>> (--br-mode=LBR) or with OpenvSwitch (--br-mode=OVS) >>>>> --- >>>>> >>>>> So, I think that OpenStack should provide more verification steps, >>>>> specially to test the communication / authentication between its >>>>> different >>>>> projects, for example: >>>>> >>>>> A- Does Nova can communicate with Neutron? How to test this? >>>>> >>>>> B- Can Nova download images from Glance? Etc... >>>>> >>>>> >>>>> Doing more reviews now... >>>>> >>>>> >>>>> Cheers! >>>>> Thiago >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Mailing list: >>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>> Post to : openstack@lists.openstack.org >>>> Unsubscribe : >>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>> >>>> >>>> >>> >>> -- >>> Nasir Mahmood >>> >>> _______________________________________________ >>> Mailing list: >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> Post to : openstack@lists.openstack.org >>> Unsubscribe : >>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>> >>> >>> > > > -- > Eugen Block voice : +49-40-559 51 75 > NDE Netzdesign und -entwicklung AG fax : +49-40-559 51 77 > Postfach 61 03 15 > D-22423 Hamburg e-mail : ebl...@nde.ag > > Vorsitzende des Aufsichtsrates: Angelika Mozdzen > Sitz und Registergericht: Hamburg, HRB 90934 > Vorstand: Jens-U. Mozdzen > USt-IdNr. DE 814 013 983 > > > > _______________________________________________ > Mailing list: > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack > Post to : openstack@lists.openstack.org > Unsubscribe : > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
