On 03/11/2010, at 8:34 AM, Steve Bennett wrote: > On 03/11/2010, at 12:23 AM, Laurent Gauch wrote: > >> under Cygwin with external JIM TCL 0.63 in ./openocd/jimtcl, the make error >> is : >> >> ../../../src/helper/command.h:34:17: jim.h: No such file or directory > > Did you forget 'make install' in ./openocd/jimtcl? > > This is the symptom I see when that step is missed. > > (Although as someone pointed out, it would be nice to have > a single stage configure/build without needing to install jimtcl)
Although the link step still fails for me on cygwin. make[4]: Entering directory `/src/openocd/src' /bin/sh ../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -o openocd.exe main.o libopenocd.la -ljim libtool: link: gcc -std=gnu99 -g -O2 -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -o openocd.exe main.o ./.libs/libopenocd.a -ljim /usr/lib/gcc/i686-pc-cygwin/4.3.4/../../../../i686-pc-cygwin/bin/ld: cannot find -ljim collect2: ld returned 1 exit status make[4]: *** [openocd.exe] Error 1 make[4]: Leaving directory `/src/openocd/src' I'm no automake expert. It seems to me that it should be possible to add include and lib paths directly to the jimtcl directory under openocd, thus avoiding the need to 'make install' and addressing this link problem. > >> >>> checking whether standard drivers can be built... yes >>> checking for ftd2xx.lib exists (win32)... checking whether ftd2xx library >>> works. >>> .. Success! >>> checking for ftd2xx highspeed device support... yes >>> checking for environ in unistd.h and stdlib.h... yes >>> checking for a C compiler for build tools... gcc -mno-cygwin -std=gnu99 >>> checking for suffix of executable build tools... .exe >>> configure: creating ./config.status >>> config.status: creating Makefile >>> config.status: creating src/Makefile >>> config.status: creating src/helper/Makefile >>> config.status: creating src/jtag/Makefile >>> config.status: creating src/jtag/drivers/Makefile >>> config.status: creating src/xsvf/Makefile >>> config.status: creating src/svf/Makefile >>> config.status: creating src/target/Makefile >>> config.status: creating src/server/Makefile >>> config.status: creating src/flash/Makefile >>> config.status: creating src/flash/nor/Makefile >>> config.status: creating src/flash/nand/Makefile >>> config.status: creating src/pld/Makefile >>> config.status: creating doc/Makefile >>> config.status: creating config.h >>> config.status: executing depfiles commands >>> config.status: executing libtool commands >>> make all-recursive >>> make[1]: Entering directory >>> `/cygdrive/c/amontec/openocd-builder/git/openocd' >>> Making all in src >>> make[2]: Entering directory >>> `/cygdrive/c/amontec/openocd-builder/git/openocd/src >>> ' >>> cat helper/startup.tcl jtag/startup.tcl target/startup.tcl >>> flash/startup.tcl ser >>> ver/startup.tcl > startup.tcl >>> make all-recursive >>> make[3]: Entering directory >>> `/cygdrive/c/amontec/openocd-builder/git/openocd/src >>> ' >>> Making all in jtag >>> make[4]: Entering directory >>> `/cygdrive/c/amontec/openocd-builder/git/openocd/src >>> /jtag' >>> cp drivers/minidriver_imp.h minidriver_imp.h >>> make all-recursive >>> make[5]: Entering directory >>> `/cygdrive/c/amontec/openocd-builder/git/openocd/src >>> /jtag' >>> Making all in drivers >>> make[6]: Entering directory >>> `/cygdrive/c/amontec/openocd-builder/git/openocd/src >>> /jtag/drivers' >>> /bin/sh ../../../libtool --tag=CC --mode=compile gcc -mno-cygwin >>> -std=gnu99 -D >>> HAVE_CONFIG_H -I. -I../../.. -I../../../src -I../../../src -g -O2 >>> -I/cygdrive >>> /c/amontec/jtagkey/driver/d2xx/nt -Wall -Wstrict-prototypes >>> -Wformat-security -W >>> shadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align >>> -Wredundan >>> t-decls -MT driver.lo -MD -MP -MF .deps/driver.Tpo -c -o driver.lo driver.c >>> libtool: compile: gcc -mno-cygwin -std=gnu99 -DHAVE_CONFIG_H -I. >>> -I../../.. -I. >>> ./../../src -I../../../src -g -O2 >>> -I/cygdrive/c/amontec/jtagkey/driver/d2xx/nt - >>> Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra >>> -Wno-unused-paramete >>> r -Wbad-function-cast -Wcast-align -Wredundant-decls -MT driver.lo -MD -MP >>> -MF . >>> deps/driver.Tpo -c driver.c -o driver.o >>> In file included from ../../../src/helper/log.h:29, >>> from ../../../src/jtag/jtag.h:27, >>> from driver.c:34: >>> ../../../src/helper/command.h:34:17: jim.h: No such file or directory >>> ../../../src/helper/command.h:35:21: jim-nvp.h: No such file or directory >> >> Regards, >> Laurent >> http://www.amontec.com >> >> _______________________________________________ >> Openocd-development mailing list >> Openocd-development@lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/openocd-development >> > > -- > µWeb: Embedded Web Framework - http://uweb.workware.net.au/ > WorkWare Systems Pty Ltd > W: www.workware.net.au P: 0434 921 300 > E: ste...@workware.net.au F: 07 3102 9221 > > > > > _______________________________________________ > Openocd-development mailing list > Openocd-development@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/openocd-development -- µWeb: Embedded Web Framework - http://uweb.workware.net.au/ WorkWare Systems Pty Ltd W: www.workware.net.au P: 0434 921 300 E: ste...@workware.net.au F: 07 3102 9221 _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
