On Sat, Aug 14, 2010 at 8:30 AM, Xiaofan Chen <xiaof...@gmail.com> wrote:
> OpenOCD has long worked with LPC-2148. Last time I was
> using a J-Link (V6, V7 and V3, it took some time to get V3 working).
>
I also tried it under Linux with the latest git. Here I am using libftdi-0.18.
Somehow the RCLK support is gone.
../git/openocd/configure --enable-maintainer-mode --enable-jlink
--enable-ft2232_libftdi --enable-parport --enable-dummy
mc...@ubuntu:~/Desktop/build/openocd/lpc2148$
openocd -f interface/jtagkey2.cfg -f board/olimex_lpc_h2148.cfg
Open On-Chip Debugger 0.5.0-dev-00485-g36333f9 (2010-08-14-11:18)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
RCLK - adaptive
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
Info : RCLK (adaptive clock speed) not supported - fallback to 500 kHz
Info : JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787,
part: 0xf1f0, ver: 0x4)
Info : Embedded ICE version 4
Info : lpc2148.cpu: hardware has 2 breakpoint/watchpoint units
--
Xiaofan
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
