lpc2148.cfg is now:
#reset_config trst_and_srst
reset_config trst_and_srst srst_pulls_trst
The openocd still fails to connect to the processor:
[o...@localhost test]$ bin/openocd -f
share/openocd/scripts/interface/olimex-arm-usb-tiny-h.cfg -f
share/openocd/scripts/target/lpc2148.cfg -c "jtag_khz 1000"
Open On-Chip Debugger 0.5.0-dev-00465-g7682877-dirty (2010-08-03-20:07)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
RCLK - adaptive
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
trst_and_srst srst_pulls_trst srst_gates_jtag trst_push_pull
srst_open_drain
1000 kHz
Info : max TCK change to: 30000 kHz
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Command handler execution failed
in procedure 'transport'
Command handler execution failed
in procedure 'init'
On Wed, 2010-08-04 at 21:19 +0200, Freddie Chopin wrote:
> Hi!
>
> Try changing "reset_config" to "srst_pulls_trst" instead of "separate"
>
> 4\/3!!
> _______________________________________________
> Openocd-development mailing list
> Openocd-development@lists.berlios.de
> https://lists.berlios.de/mailman/listinfo/openocd-development
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
