Yes, actually I use auto-detect for AVR8 chips both on ISP and JTAG according to the JTAG ID. So no need to specify the chip module.
2010/1/16 David Brownell <davi...@pacbell.net> > On Saturday 16 January 2010, Paul Fertser wrote: > > > If use .cfg for a AVR8 chip, there will be many such configure > > > files. > > > > I do not see a problem. Moreover if openOCD implements proper avr > > support one can automatically convert configs. > > Simon, do the AVR8 chips have proper JTAG IDs, from which that > configuration information can be derived? Like a table mapping. > > Sometimes vendors are a bit weak with making each chip have a > unique ID ... instead several chips have the same ID. But then > sometimes they compensate by having secondary IDs. > > Yes, having a per-chip config file is an *annoying* and somewhat > error prone, but workable, solution. > > If OpenOCD were to support some of the AVR8 chips for JTAG debug > (instead of just programming), it would clearly be better to have > some safe way to at least verify such config files. :) > > - Dave > > > -- Best Regards, SimonQian http://www.SimonQian.com
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
