On Mon, 2009-11-23 at 13:04 -0600, Dean Glazeski wrote: > Hi all, > > I've finished up the implementation and documentation for an AT91SAM9 > NAND driver for OpenOCD. In total there are about 34 patches that > includes some refactor work for both the NAND controller layer and the > ARM NAND I/O pieces. I have the branch posted at > http://repo.or.cz/w/dnglaze.git under the at91sam9-nand head. I'm not > sure what the best approach is for working this into the tree cause > this is the biggest change I've attempted to contribute. I can only > verify that this works for my Olimex SAM9-L9260 board. Any > suggestions, testing, or improvements are very welcome.
My first question is: would you mind moving your repository to be a fork of openocd.git? You need to contact pasky (the maintainer), but he will put it in the right place for you. There are several good reasons for him to do this, including saving mirroring bandwidth and disk space on the server. For us, it puts you in the list with the other forks, so others can see when you have pushed new work more easily. Anyway, I just pulled your branches and verified each patch builds okay. That's a step in the right direction. I'll look more closely at them when I am done with my command registration series, which I am getting nearly ready to post. --Z _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
