Hi, On Thu, 17 Jun 2004, Jean Christophe Pelletier wrote: > My card dc10+ is working. > Until now, I am making a "modprobe zr36067" to make it started. > I would like to know what I have to put in the /etc/modules.conf to make it loaded > everytime ?
You can add loading the v4l module to your XF86Config file. then, add a "alias char-major-81-0 zr36067" to your /etc/modules.conf, and it'll load the zr36067 driver as first driver for v4l cards during v4l/X initialization. > I try to start studio (v4l linuxvideostudio-0.1.7-1) > When I start it, I have a black screen and a message when I push "initialize > capture" : > "Lavrec failed with the following error: [lavrec] Error initializing Audio: Audio > task died. Reason: Error mapping audio buffer - Input/output error. > with xawtv, sound is working and it is LOOK LIKE the options are correct. In the preferences screen, there's an option in the audio section that says "use read instead of mmap capture mode" or so. Enable that. Ronald ------------------------------------------------------- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
