Hi, Did you manage to solve this?
I'm also thinking of getting a protectli with NVME on and would like to verify if there is a problem with this or not. Alternatively there is the option of SSD. G On 11/12/2024 18:27, Joerg Streckfuss wrote: > Dear list, > > i'm running OpenBSD 7.6 on a Protecli VP4670 with with 64G Ram (Micron). > The system hosted 4 vms. All vms are also openbsd 7.6. > > The load an the system is not very high. In addition, the CPU > temperature is not particularly high. In conjunction with obsdfreqd, it > fluctuates in the range of 46 degrees. I read the CPU temperature sensor > every 10 seconds. Before the last crash it showed 46 degrees. Without > obsdfreqd, the CPU temperature increases to approx. 65 degrees. > > The system runs stably for 1 to 2 days. At some point it then crashes > with the following message from the ddb: > > <snip> > Stopped at sleep_finish+0x22c: int $3 > <snap> > > > After i switched the console to tty0 the system crashed immediately with > the following error: > > <snip> > net.inet.ip.forwarding: 0 -> 1 > starting network > panic: biodone already > Stopped at db_enter+0x14: popq %rbp > TID PID UID PRFLAGS PFLAGS CPU COMMAND > *426721 90617 0 0x100003 0 0K dd > 38189 17220 0 0x3 0 1 ar > db_enter() at db_enter+0x14 > panic(ffffffff8235d778) at panic+0xdd > biodone(fffffd904b3037e0) at biodone+0x105 > sd_buf_done(fffffd8e6d58f370) at sd_buf_done+0x121 > scsi_done(fffffd8e6d58f370) at scsi_done+0x31 > nvme_q_complete(ffff80000039f000,ffff8000003a1380) at nvme_q_complete+0x134 > nvme_intr(ffff80000039f000) at nvme_intr+0x2b > intr_handler(ffff80005cd44a70,ffff800000354180) at intr_handler+0x91 > Xintr_ioapic_edge41_untramp() at Xintr_ioapic_edge41_untramp+0x18f > Xspllower() at Xspllower+0x1d > pool_get(ffffffff8288e338,2) at pool_get+0xdb > uvm_analloc() at uvm_analloc+0x27 > uvm_fault_lower(ffff80005cd44da0,ffff80005cd44dd8,ffff80005cd44d20,0) at > uvm_fa > ult_lower+0x10f > uvm_fault(fffffd905d905810,352a538c000,0,2) at uvm_fault+0x1ef > end trace frame: 0xffff80005cd44ed0, count: 0 > https://www.openbsd.org/ddb.html describes the minimum info required in bug > reports. Insufficient info makes it difficult to find and fix bugs. > ddb{0}> > <snap> > > Bios (ami) version is the newest available (5.17). > > A 24-hour memory test did not reveal any memory errors. > > Is this an indication of a hardware-based error or is the cause more > likely to be software-based? > > Many regards, > > Joerg > > dmesg: > <snip> > OpenBSD 7.6 (GENERIC.MP) #338: Mon Sep 30 08:55:35 MDT 2024 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 68537741312 (65362MB) > avail mem = 66436628480 (63358MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x99ab6000 (94 entries) > bios0: vendor American Megatrends Inc. version "5.17" date 09/11/2024 > bios0: Protectli VP4670 > efi0 at bios0: UEFI 2.7 > efi0: American Megatrends rev 0x50011 > acpi0 at bios0: ACPI 6.2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP MCFG SSDT FIDT SSDT HPET SSDT SSDT NHLT LPIT > SSDT SSDT DBGP DBG2 SSDT DMAR SPCR BGRT TPM2 WSMT APIC FPDT > acpi0: wakeup devices RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) > PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) > PXSX(S4) RP08(S4) PXSX(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1479.93 MHz, 06-a6-00, > patch 000000fe > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ> > cpu0: cpuid 7.0 > ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT> > edx=bc000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD> > cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 > cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> > ecx=121<LAHF,ABM,3DNOWP> > cpu0: cpuid 80000007 edx=100<ITSC> > cpu0: msr > 10a=a0a0c2b<IBRS_ALL,SKIP_L1DFL,MDS_NO,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,RRSBA,GDS_CTRL,RFDS_NO> > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 12MB 64b/line 16-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1277.76 MHz, 06-a6-00, > patch 000000fe > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1130.74 MHz, 06-a6-00, > patch 000000fe > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1013.32 MHz, 06-a6-00, > patch 000000fe > cpu3: smt 0, core 3, package 0 > cpu4 at mainbus0: apid 8 (application processor) > cpu4: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu4: smt 0, core 4, package 0 > cpu5 at mainbus0: apid 10 (application processor) > cpu5: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.69 MHz, 06-a6-00, > patch 000000fe > cpu5: smt 0, core 5, package 0 > cpu6 at mainbus0: apid 1 (application processor) > cpu6: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu6: smt 1, core 0, package 0 > cpu7 at mainbus0: apid 3 (application processor) > cpu7: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu7: smt 1, core 1, package 0 > cpu8 at mainbus0: apid 5 (application processor) > cpu8: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu8: smt 1, core 2, package 0 > cpu9 at mainbus0: apid 7 (application processor) > cpu9: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu9: smt 1, core 3, package 0 > cpu10 at mainbus0: apid 9 (application processor) > cpu10: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu10: smt 1, core 4, package 0 > cpu11 at mainbus0: apid 11 (application processor) > cpu11: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, > patch 000000fe > cpu11: smt 1, core 5, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus -1 (PEG1) > acpiprt3 at acpi0: bus -1 (PEG2) > acpiprt4 at acpi0: bus -1 (RP01) > acpiprt5 at acpi0: bus -1 (RP02) > acpiprt6 at acpi0: bus -1 (RP03) > acpiprt7 at acpi0: bus -1 (RP04) > acpiprt8 at acpi0: bus 1 (RP05) > acpiprt9 at acpi0: bus 2 (RP06) > acpiprt10 at acpi0: bus 3 (RP07) > acpiprt11 at acpi0: bus 4 (RP08) > acpiprt12 at acpi0: bus 5 (RP09) > acpiprt13 at acpi0: bus 6 (RP10) > acpiprt14 at acpi0: bus -1 (RP11) > acpiprt15 at acpi0: bus 7 (RP12) > acpiprt16 at acpi0: bus 8 (RP13) > acpiprt17 at acpi0: bus -1 (RP14) > acpiprt18 at acpi0: bus -1 (RP15) > acpiprt19 at acpi0: bus -1 (RP16) > acpiprt20 at acpi0: bus -1 (RP17) > acpiprt21 at acpi0: bus -1 (RP18) > acpiprt22 at acpi0: bus -1 (RP19) > acpiprt23 at acpi0: bus -1 (RP20) > acpiprt24 at acpi0: bus -1 (RP21) > acpiprt25 at acpi0: bus -1 (RP22) > acpiprt26 at acpi0: bus -1 (RP23) > acpiprt27 at acpi0: bus -1 (RP24) > acpiec0 at acpi0: not present > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 > com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > com0: console > pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 > 0xfd6a0000/0x10000 irq 14, 320 pins > acpibtn0 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > intelpmc0 at acpi0: PEPD > state 0: 0x7f:1:2:0x00:0x0000000000000060 > counter: 0x7f:64:0:0x00:0x0000000000000632 > frequency: 0 > state 1: 0x7f:1:2:0x00:0x0000000000000060 > counter: 0x00:32:0:0x03:0x00000000fe00193c > frequency: 9580 > "ACPI000E" at acpi0 not configured > acpibtn1 at acpi0: PWRB > tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 > rev 0x0 > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpipwrres0 at acpi0: USBC, resource for XDCI > acpipwrres1 at acpi0: V0PR > acpipwrres2 at acpi0: V1PR > acpipwrres3 at acpi0: V2PR > acpipwrres4 at acpi0: WRST > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpicpu1 at acpi0: C1(@1 halt!), PSS > acpicpu2 at acpi0: C1(@1 halt!), PSS > acpicpu3 at acpi0: C1(@1 halt!), PSS > acpicpu4 at acpi0: C1(@1 halt!), PSS > acpicpu5 at acpi0: C1(@1 halt!), PSS > acpicpu6 at acpi0: C1(@1 halt!), PSS > acpicpu7 at acpi0: C1(@1 halt!), PSS > acpicpu8 at acpi0: C1(@1 halt!), PSS > acpicpu9 at acpi0: C1(@1 halt!), PSS > acpicpu10 at acpi0: C1(@1 halt!), PSS > acpicpu11 at acpi0: C1(@1 halt!), PSS > acpipwrres5 at acpi0: FN00, resource for FAN0 > acpipwrres6 at acpi0: FN01, resource for FAN1 > acpipwrres7 at acpi0: FN02, resource for FAN2 > acpipwrres8 at acpi0: FN03, resource for FAN3 > acpipwrres9 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 119 degC > acpipwrres10 at acpi0: PIN_ > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 1479 MHz: speeds: 1601, 1600, 1500, 1400, 1300, > 1200, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 10G Host" rev 0x00 > "Intel UHD Graphics" rev 0x04 at pci0 dev 2 function 0 not configured > pchtemp0 at pci0 dev 18 function 0 "Intel 400 Series Thermal" rev 0x00 > xhci0 at pci0 dev 20 function 0 "Intel 400 Series xHCI" rev 0x00: msi, > xHCI 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 400 Series Shared SRAM" rev 0x00 at pci0 dev 20 function 2 not > configured > "Intel 400 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured > ahci0 at pci0 dev 23 function 0 "Intel 400 Series AHCI" rev 0x00: msi, > AHCI 1.3.1 > ahci0: PHY offline on port 0 > scsibus1 at ahci0: 32 targets > sdhc0 at pci0 dev 26 function 0 "Intel 400 Series eMMC" rev 0x00: apic 2 > int 16 > sdhc0: SDHC 3.00, 200 MHz base clock > sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma > ppb0 at pci0 dev 28 function 0 "Intel 400 Series PCIE" rev 0xf0: msi > pci1 at ppb0 bus 1 > igc0 at pci1 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, > address 64:62:66:21:3c:4a > ppb1 at pci0 dev 28 function 5 "Intel 400 Series PCIE" rev 0xf0: msi > pci2 at ppb1 bus 2 > igc1 at pci2 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, > address 64:62:66:21:3c:4b > ppb2 at pci0 dev 28 function 6 "Intel 400 Series PCIE" rev 0xf0: msi > pci3 at ppb2 bus 3 > igc2 at pci3 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, > address 64:62:66:21:3c:4c > ppb3 at pci0 dev 28 function 7 "Intel 400 Series PCIE" rev 0xf0: msi > pci4 at ppb3 bus 4 > igc3 at pci4 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, > address 64:62:66:21:3c:4d > ppb4 at pci0 dev 29 function 0 "Intel 400 Series PCIE" rev 0xf0: msi > pci5 at ppb4 bus 5 > igc4 at pci5 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, > address 64:62:66:21:3c:4e > ppb5 at pci0 dev 29 function 1 "Intel 400 Series PCIE" rev 0xf0: msi > pci6 at ppb5 bus 6 > igc5 at pci6 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, > address 64:62:66:21:3c:4f > ppb6 at pci0 dev 29 function 3 "Intel 400 Series PCIE" rev 0xf0: msi > pci7 at ppb6 bus 7 > "Atheros QCA6174" rev 0x30 at pci7 dev 0 function 0 not configured > ppb7 at pci0 dev 29 function 4 "Intel 400 Series PCIE" rev 0xf0: msi > pci8 at ppb7 bus 8 > nvme0 at pci8 dev 0 function 0 vendor "Kingston", unknown product 0x5017 > rev 0x03: msix, NVMe 1.4 > nvme0: KINGSTON SNV2S2000G, firmware SBK00104, serial 50026B77850A1177 > scsibus2 at nvme0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S20, SBK0> > sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors > pcib0 at pci0 dev 31 function 0 "Intel 400 Series LPC" rev 0x00 > azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi > azalia0: codecs: Realtek ALC897, Intel/0x280b, using Realtek ALC897 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 400 Series SMBus" rev 0x00: > apic 2 int 16 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 32GB DDR4 SDRAM PC4-21300 SO-DIMM > spdmem1 at iic0 addr 0x52: 32GB DDR4 SDRAM PC4-21300 SO-DIMM > "Intel 400 Series SPI" rev 0x00 at pci0 dev 31 function 5 not configured > isa0 at pcib0 > isadma0 at isa0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb0 at mainbus0: 3840x2160, 32bpp > wsdisplay0 at efifb0 mux 1 > wsdisplay0: screen 0-5 added (std, vt100 emulation) > uhub1 at uhub0 port 2 configuration 1 interface 0 "Apple, Inc. Keyboard > Hub" rev 2.00/94.15 addr 2 > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple, Inc Apple > Keyboard" rev 2.00/0.67 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13 > wskbd0 at ukbd0 mux 1 > wskbd0: connecting to wsdisplay0 > uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple, Inc Apple > Keyboard" rev 2.00/0.67 addr 3 > uhidev1: iclass 3/0 > ucc0 at uhidev1: 7 usages, 7 keys, enum > wskbd1 at ucc0 mux 1 > wskbd1: connecting to wsdisplay0 > sdmmc0: can't enable card > ugen0 at uhub0 port 6 "Atheros Communications product 0x3004" rev > 1.10/0.01 addr 4 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (df9432d5d8eb9427.a) swap on sd0b dump on sd0b > <snap> > > >
