Dear list,

i'm running OpenBSD 7.6 on a Protecli VP4670 with with 64G Ram (Micron).
The system hosted 4 vms. All vms are also openbsd 7.6.

The load an the system is not very high. In addition, the CPU
temperature is not particularly high. In conjunction with obsdfreqd, it
fluctuates in the range of 46 degrees. I read the CPU temperature sensor
every 10 seconds. Before the last crash it showed 46 degrees. Without
obsdfreqd, the CPU temperature increases to approx. 65 degrees.

The system runs stably for 1 to 2 days. At some point it then crashes
with the following message from the ddb:

<snip>
Stopped at                  sleep_finish+0x22c:        int        $3
<snap>


After i switched the console to tty0 the system crashed immediately with
the following error:

<snip>
net.inet.ip.forwarding: 0 -> 1
starting network
panic: biodone already
Stopped at      db_enter+0x14:  popq    %rbp
     TID    PID    UID     PRFLAGS     PFLAGS  CPU  COMMAND
*426721  90617      0    0x100003          0    0K dd
   38189  17220      0         0x3          0    1  ar
db_enter() at db_enter+0x14
panic(ffffffff8235d778) at panic+0xdd
biodone(fffffd904b3037e0) at biodone+0x105
sd_buf_done(fffffd8e6d58f370) at sd_buf_done+0x121
scsi_done(fffffd8e6d58f370) at scsi_done+0x31
nvme_q_complete(ffff80000039f000,ffff8000003a1380) at nvme_q_complete+0x134
nvme_intr(ffff80000039f000) at nvme_intr+0x2b
intr_handler(ffff80005cd44a70,ffff800000354180) at intr_handler+0x91
Xintr_ioapic_edge41_untramp() at Xintr_ioapic_edge41_untramp+0x18f
Xspllower() at Xspllower+0x1d
pool_get(ffffffff8288e338,2) at pool_get+0xdb
uvm_analloc() at uvm_analloc+0x27
uvm_fault_lower(ffff80005cd44da0,ffff80005cd44dd8,ffff80005cd44d20,0) at
uvm_fa
ult_lower+0x10f
uvm_fault(fffffd905d905810,352a538c000,0,2) at uvm_fault+0x1ef
end trace frame: 0xffff80005cd44ed0, count: 0
https://www.openbsd.org/ddb.html describes the minimum info required in bug
reports.  Insufficient info makes it difficult to find and fix bugs.
ddb{0}>
<snap>

Bios (ami) version is the newest available (5.17).

A 24-hour memory test did not reveal any memory errors.

Is this an indication of a hardware-based error or is the cause more
likely to be software-based?

Many regards,

Joerg

dmesg:
<snip>
OpenBSD 7.6 (GENERIC.MP) #338: Mon Sep 30 08:55:35 MDT 2024
     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 68537741312 (65362MB)
avail mem = 66436628480 (63358MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x99ab6000 (94 entries)
bios0: vendor American Megatrends Inc. version "5.17" date 09/11/2024
bios0: Protectli VP4670
efi0 at bios0: UEFI 2.7
efi0: American Megatrends rev 0x50011
acpi0 at bios0: ACPI 6.2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP MCFG SSDT FIDT SSDT HPET SSDT SSDT NHLT LPIT
SSDT SSDT DBGP DBG2 SSDT DMAR SPCR BGRT TPM2 WSMT APIC FPDT
acpi0: wakeup devices RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4)
PXSX(S4) RP08(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1479.93 MHz, 06-a6-00,
patch 000000fe
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0
ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT>
edx=bc000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG>
ecx=121<LAHF,ABM,3DNOWP>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: msr
10a=a0a0c2b<IBRS_ALL,SKIP_L1DFL,MDS_NO,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,RRSBA,GDS_CTRL,RFDS_NO>
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB
64b/line 4-way L2 cache, 12MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1277.76 MHz, 06-a6-00,
patch 000000fe
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1130.74 MHz, 06-a6-00,
patch 000000fe
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1013.32 MHz, 06-a6-00,
patch 000000fe
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 8 (application processor)
cpu4: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu4: smt 0, core 4, package 0
cpu5 at mainbus0: apid 10 (application processor)
cpu5: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.69 MHz, 06-a6-00,
patch 000000fe
cpu5: smt 0, core 5, package 0
cpu6 at mainbus0: apid 1 (application processor)
cpu6: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu6: smt 1, core 0, package 0
cpu7 at mainbus0: apid 3 (application processor)
cpu7: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu7: smt 1, core 1, package 0
cpu8 at mainbus0: apid 5 (application processor)
cpu8: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu8: smt 1, core 2, package 0
cpu9 at mainbus0: apid 7 (application processor)
cpu9: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu9: smt 1, core 3, package 0
cpu10 at mainbus0: apid 9 (application processor)
cpu10: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu10: smt 1, core 4, package 0
cpu11 at mainbus0: apid 11 (application processor)
cpu11: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00,
patch 000000fe
cpu11: smt 1, core 5, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus 1 (RP05)
acpiprt9 at acpi0: bus 2 (RP06)
acpiprt10 at acpi0: bus 3 (RP07)
acpiprt11 at acpi0: bus 4 (RP08)
acpiprt12 at acpi0: bus 5 (RP09)
acpiprt13 at acpi0: bus 6 (RP10)
acpiprt14 at acpi0: bus -1 (RP11)
acpiprt15 at acpi0: bus 7 (RP12)
acpiprt16 at acpi0: bus 8 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpiprt24 at acpi0: bus -1 (RP21)
acpiprt25 at acpi0: bus -1 (RP22)
acpiprt26 at acpi0: bus -1 (RP23)
acpiprt27 at acpi0: bus -1 (RP24)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000
0xfd6a0000/0x10000 irq 14, 320 pins
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
intelpmc0 at acpi0: PEPD
state 0: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x7f:64:0:0x00:0x0000000000000632
frequency: 0
state 1: 0x7f:1:2:0x00:0x0000000000000060
counter: 0x00:32:0:0x03:0x00000000fe00193c
frequency: 9580
"ACPI000E" at acpi0 not configured
acpibtn1 at acpi0: PWRB
tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000
rev 0x0
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpipwrres0 at acpi0: USBC, resource for XDCI
acpipwrres1 at acpi0: V0PR
acpipwrres2 at acpi0: V1PR
acpipwrres3 at acpi0: V2PR
acpipwrres4 at acpi0: WRST
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS
acpicpu3 at acpi0: C1(@1 halt!), PSS
acpicpu4 at acpi0: C1(@1 halt!), PSS
acpicpu5 at acpi0: C1(@1 halt!), PSS
acpicpu6 at acpi0: C1(@1 halt!), PSS
acpicpu7 at acpi0: C1(@1 halt!), PSS
acpicpu8 at acpi0: C1(@1 halt!), PSS
acpicpu9 at acpi0: C1(@1 halt!), PSS
acpicpu10 at acpi0: C1(@1 halt!), PSS
acpicpu11 at acpi0: C1(@1 halt!), PSS
acpipwrres5 at acpi0: FN00, resource for FAN0
acpipwrres6 at acpi0: FN01, resource for FAN1
acpipwrres7 at acpi0: FN02, resource for FAN2
acpipwrres8 at acpi0: FN03, resource for FAN3
acpipwrres9 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpipwrres10 at acpi0: PIN_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1479 MHz: speeds: 1601, 1600, 1500, 1400, 1300,
1200, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 10G Host" rev 0x00
"Intel UHD Graphics" rev 0x04 at pci0 dev 2 function 0 not configured
pchtemp0 at pci0 dev 18 function 0 "Intel 400 Series Thermal" rev 0x00
xhci0 at pci0 dev 20 function 0 "Intel 400 Series xHCI" rev 0x00: msi,
xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 400 Series Shared SRAM" rev 0x00 at pci0 dev 20 function 2 not
configured
"Intel 400 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 400 Series AHCI" rev 0x00: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
scsibus1 at ahci0: 32 targets
sdhc0 at pci0 dev 26 function 0 "Intel 400 Series eMMC" rev 0x00: apic 2
int 16
sdhc0: SDHC 3.00, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
ppb0 at pci0 dev 28 function 0 "Intel 400 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
igc0 at pci1 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues,
address 64:62:66:21:3c:4a
ppb1 at pci0 dev 28 function 5 "Intel 400 Series PCIE" rev 0xf0: msi
pci2 at ppb1 bus 2
igc1 at pci2 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues,
address 64:62:66:21:3c:4b
ppb2 at pci0 dev 28 function 6 "Intel 400 Series PCIE" rev 0xf0: msi
pci3 at ppb2 bus 3
igc2 at pci3 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues,
address 64:62:66:21:3c:4c
ppb3 at pci0 dev 28 function 7 "Intel 400 Series PCIE" rev 0xf0: msi
pci4 at ppb3 bus 4
igc3 at pci4 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues,
address 64:62:66:21:3c:4d
ppb4 at pci0 dev 29 function 0 "Intel 400 Series PCIE" rev 0xf0: msi
pci5 at ppb4 bus 5
igc4 at pci5 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues,
address 64:62:66:21:3c:4e
ppb5 at pci0 dev 29 function 1 "Intel 400 Series PCIE" rev 0xf0: msi
pci6 at ppb5 bus 6
igc5 at pci6 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues,
address 64:62:66:21:3c:4f
ppb6 at pci0 dev 29 function 3 "Intel 400 Series PCIE" rev 0xf0: msi
pci7 at ppb6 bus 7
"Atheros QCA6174" rev 0x30 at pci7 dev 0 function 0 not configured
ppb7 at pci0 dev 29 function 4 "Intel 400 Series PCIE" rev 0xf0: msi
pci8 at ppb7 bus 8
nvme0 at pci8 dev 0 function 0 vendor "Kingston", unknown product 0x5017
rev 0x03: msix, NVMe 1.4
nvme0: KINGSTON SNV2S2000G, firmware SBK00104, serial 50026B77850A1177
scsibus2 at nvme0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S20, SBK0>
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
pcib0 at pci0 dev 31 function 0 "Intel 400 Series LPC" rev 0x00
azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi
azalia0: codecs: Realtek ALC897, Intel/0x280b, using Realtek ALC897
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 400 Series SMBus" rev 0x00:
apic 2 int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 32GB DDR4 SDRAM PC4-21300 SO-DIMM
spdmem1 at iic0 addr 0x52: 32GB DDR4 SDRAM PC4-21300 SO-DIMM
"Intel 400 Series SPI" rev 0x00 at pci0 dev 31 function 5 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb0 at mainbus0: 3840x2160, 32bpp
wsdisplay0 at efifb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
uhub1 at uhub0 port 2 configuration 1 interface 0 "Apple, Inc. Keyboard
Hub" rev 2.00/94.15 addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple, Inc Apple
Keyboard" rev 2.00/0.67 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple, Inc Apple
Keyboard" rev 2.00/0.67 addr 3
uhidev1: iclass 3/0
ucc0 at uhidev1: 7 usages, 7 keys, enum
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
sdmmc0: can't enable card
ugen0 at uhub0 port 6 "Atheros Communications product 0x3004" rev
1.10/0.01 addr 4
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (df9432d5d8eb9427.a) swap on sd0b dump on sd0b
<snap>

Reply via email to