February 26, 2025 11:51 PM, "Mickael Torres" <cont...@mtorres.fr> wrote:
> February 26, 2025 8:52 PM, "Mickael Torres" <cont...@mtorres.fr> wrote: > >> December 11, 2024 5:27 PM, "Joerg Streckfuss" <m...@dirtyhack.org> wrote: >> >>> Dear list, >>> >>> i'm running OpenBSD 7.6 on a Protecli VP4670 with with 64G Ram (Micron). >>> The system hosted 4 vms. All vms are also openbsd 7.6. >>> >>> The load an the system is not very high. In addition, the CPU >>> temperature is not particularly high. In conjunction with obsdfreqd, it >>> fluctuates in the range of 46 degrees. I read the CPU temperature sensor >>> every 10 seconds. Before the last crash it showed 46 degrees. Without >>> obsdfreqd, the CPU temperature increases to approx. 65 degrees. >>> >>> The system runs stably for 1 to 2 days. At some point it then crashes >>> with the following message from the ddb: >>> >>> <snip> >>> Stopped at sleep_finish+0x22c: int $3 >>> <snap> >>> >>> After i switched the console to tty0 the system crashed immediately with >>> the following error: >>> >>> <snip> >>> net.inet.ip.forwarding: 0 -> 1 >>> starting network >>> panic: biodone already >>> Stopped at db_enter+0x14: popq %rbp >>> TID PID UID PRFLAGS PFLAGS CPU COMMAND >>> *426721 90617 0 0x100003 0 0K dd >>> 38189 17220 0 0x3 0 1 ar >>> db_enter() at db_enter+0x14 >>> panic(ffffffff8235d778) at panic+0xdd >>> biodone(fffffd904b3037e0) at biodone+0x105 >>> sd_buf_done(fffffd8e6d58f370) at sd_buf_done+0x121 >>> scsi_done(fffffd8e6d58f370) at scsi_done+0x31 >>> nvme_q_complete(ffff80000039f000,ffff8000003a1380) at nvme_q_complete+0x134 >>> nvme_intr(ffff80000039f000) at nvme_intr+0x2b >>> intr_handler(ffff80005cd44a70,ffff800000354180) at intr_handler+0x91 >>> Xintr_ioapic_edge41_untramp() at Xintr_ioapic_edge41_untramp+0x18f >>> Xspllower() at Xspllower+0x1d >>> pool_get(ffffffff8288e338,2) at pool_get+0xdb >>> uvm_analloc() at uvm_analloc+0x27 >>> uvm_fault_lower(ffff80005cd44da0,ffff80005cd44dd8,ffff80005cd44d20,0) at >>> uvm_fa >>> ult_lower+0x10f >>> uvm_fault(fffffd905d905810,352a538c000,0,2) at uvm_fault+0x1ef >>> end trace frame: 0xffff80005cd44ed0, count: 0 >>> https://www.openbsd.org/ddb.html describes the minimum info required in bug >>> reports. Insufficient info makes it difficult to find and fix bugs. >>> ddb{0}> >>> <snap> >>> >>> Bios (ami) version is the newest available (5.17). >>> >>> A 24-hour memory test did not reveal any memory errors. >>> >>> Is this an indication of a hardware-based error or is the cause more >>> likely to be software-based? >>> >>> Many regards, >>> >>> Joerg >>> >>> dmesg: >>> <snip> >>> OpenBSD 7.6 (GENERIC.MP) #338: Mon Sep 30 08:55:35 MDT 2024 >>> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >>> real mem = 68537741312 (65362MB) >>> avail mem = 66436628480 (63358MB) >>> random: good seed from bootblocks >>> mpath0 at root >>> scsibus0 at mpath0: 256 targets >>> mainbus0 at root >>> bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x99ab6000 (94 entries) >>> bios0: vendor American Megatrends Inc. version "5.17" date 09/11/2024 >>> bios0: Protectli VP4670 >>> efi0 at bios0: UEFI 2.7 >>> efi0: American Megatrends rev 0x50011 >>> acpi0 at bios0: ACPI 6.2 >>> acpi0: sleep states S0 S4 S5 >>> acpi0: tables DSDT FACP MCFG SSDT FIDT SSDT HPET SSDT SSDT NHLT LPIT >>> SSDT SSDT DBGP DBG2 SSDT DMAR SPCR BGRT TPM2 WSMT APIC FPDT >>> acpi0: wakeup devices RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) >>> PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) >>> PXSX(S4) RP08(S4) PXSX(S4) [...] >>> acpitimer0 at acpi0: 3579545 Hz, 24 bits >>> acpimcfg0 at acpi0 >>> acpimcfg0: addr 0xe0000000, bus 0-255 >>> acpihpet0 at acpi0: 23999999 Hz >>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>> cpu0 at mainbus0: apid 0 (boot processor) >>> cpu0: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1479.93 MHz, 06-a6-00, >>> patch 000000fe >>> cpu0: cpuid 1 >>> edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI, >>> MX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >>> ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE >>> .1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> >>> cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ> >>> cpu0: cpuid 7.0 >>> ebx=29c67af<FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT, >>> T> >>> edx=bc000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD> >>> cpu0: cpuid a vers=4, gp=4, gpwidth=48, ff=3, ffwidth=48 >>> cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> >>> cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> >>> ecx=121<LAHF,ABM,3DNOWP> >>> cpu0: cpuid 80000007 edx=100<ITSC> >>> cpu0: msr >>> 10a=a0a0c2b<IBRS_ALL,SKIP_L1DFL,MDS_NO,MISC_PKG_CT,ENERGY_FILT,FB_CLEAR,RRSBA,GDS_CTRL,RFDS_NO> >>> cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB >>> 64b/line 4-way L2 cache, 12MB 64b/line 16-way L3 cache >>> cpu0: smt 0, core 0, package 0 >>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges >>> cpu0: apic clock running at 24MHz >>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE >>> cpu1 at mainbus0: apid 2 (application processor) >>> cpu1: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1277.76 MHz, 06-a6-00, >>> patch 000000fe >>> cpu1: smt 0, core 1, package 0 >>> cpu2 at mainbus0: apid 4 (application processor) >>> cpu2: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1130.74 MHz, 06-a6-00, >>> patch 000000fe >>> cpu2: smt 0, core 2, package 0 >>> cpu3 at mainbus0: apid 6 (application processor) >>> cpu3: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 1013.32 MHz, 06-a6-00, >>> patch 000000fe >>> cpu3: smt 0, core 3, package 0 >>> cpu4 at mainbus0: apid 8 (application processor) >>> cpu4: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu4: smt 0, core 4, package 0 >>> cpu5 at mainbus0: apid 10 (application processor) >>> cpu5: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.69 MHz, 06-a6-00, >>> patch 000000fe >>> cpu5: smt 0, core 5, package 0 >>> cpu6 at mainbus0: apid 1 (application processor) >>> cpu6: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu6: smt 1, core 0, package 0 >>> cpu7 at mainbus0: apid 3 (application processor) >>> cpu7: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu7: smt 1, core 1, package 0 >>> cpu8 at mainbus0: apid 5 (application processor) >>> cpu8: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu8: smt 1, core 2, package 0 >>> cpu9 at mainbus0: apid 7 (application processor) >>> cpu9: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu9: smt 1, core 3, package 0 >>> cpu10 at mainbus0: apid 9 (application processor) >>> cpu10: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu10: smt 1, core 4, package 0 >>> cpu11 at mainbus0: apid 11 (application processor) >>> cpu11: Intel(R) Core(TM) i7-10810U CPU @ 1.10GHz, 997.68 MHz, 06-a6-00, >>> patch 000000fe >>> cpu11: smt 1, core 5, package 0 >>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins >>> acpiprt0 at acpi0: bus 0 (PCI0) >>> acpiprt1 at acpi0: bus -1 (PEG0) >>> acpiprt2 at acpi0: bus -1 (PEG1) >>> acpiprt3 at acpi0: bus -1 (PEG2) >>> acpiprt4 at acpi0: bus -1 (RP01) >>> acpiprt5 at acpi0: bus -1 (RP02) >>> acpiprt6 at acpi0: bus -1 (RP03) >>> acpiprt7 at acpi0: bus -1 (RP04) >>> acpiprt8 at acpi0: bus 1 (RP05) >>> acpiprt9 at acpi0: bus 2 (RP06) >>> acpiprt10 at acpi0: bus 3 (RP07) >>> acpiprt11 at acpi0: bus 4 (RP08) >>> acpiprt12 at acpi0: bus 5 (RP09) >>> acpiprt13 at acpi0: bus 6 (RP10) >>> acpiprt14 at acpi0: bus -1 (RP11) >>> acpiprt15 at acpi0: bus 7 (RP12) >>> acpiprt16 at acpi0: bus 8 (RP13) >>> acpiprt17 at acpi0: bus -1 (RP14) >>> acpiprt18 at acpi0: bus -1 (RP15) >>> acpiprt19 at acpi0: bus -1 (RP16) >>> acpiprt20 at acpi0: bus -1 (RP17) >>> acpiprt21 at acpi0: bus -1 (RP18) >>> acpiprt22 at acpi0: bus -1 (RP19) >>> acpiprt23 at acpi0: bus -1 (RP20) >>> acpiprt24 at acpi0: bus -1 (RP21) >>> acpiprt25 at acpi0: bus -1 (RP22) >>> acpiprt26 at acpi0: bus -1 (RP23) >>> acpiprt27 at acpi0: bus -1 (RP24) >>> acpiec0 at acpi0: not present >>> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000 >>> com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo >>> com0: console >>> pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 >>> 0xfd6a0000/0x10000 irq 14, 320 pins >>> acpibtn0 at acpi0: SLPB >>> "PNP0C14" at acpi0 not configured >>> "PNP0C14" at acpi0 not configured >>> intelpmc0 at acpi0: PEPD >>> state 0: 0x7f:1:2:0x00:0x0000000000000060 >>> counter: 0x7f:64:0:0x00:0x0000000000000632 >>> frequency: 0 >>> state 1: 0x7f:1:2:0x00:0x0000000000000060 >>> counter: 0x00:32:0:0x03:0x00000000fe00193c >>> frequency: 9580 >>> "ACPI000E" at acpi0 not configured >>> acpibtn1 at acpi0: PWRB >>> tpm0 at acpi0 TPM_ 2.0 (CRB) addr 0xfed40000/0x5000, device 0x00000000 >>> rev 0x0 >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> "PNP0C0B" at acpi0 not configured >>> acpipwrres0 at acpi0: USBC, resource for XDCI >>> acpipwrres1 at acpi0: V0PR >>> acpipwrres2 at acpi0: V1PR >>> acpipwrres3 at acpi0: V2PR >>> acpipwrres4 at acpi0: WRST >>> acpicpu0 at acpi0: C1(@1 halt!), PSS >>> acpicpu1 at acpi0: C1(@1 halt!), PSS >>> acpicpu2 at acpi0: C1(@1 halt!), PSS >>> acpicpu3 at acpi0: C1(@1 halt!), PSS >>> acpicpu4 at acpi0: C1(@1 halt!), PSS >>> acpicpu5 at acpi0: C1(@1 halt!), PSS >>> acpicpu6 at acpi0: C1(@1 halt!), PSS >>> acpicpu7 at acpi0: C1(@1 halt!), PSS >>> acpicpu8 at acpi0: C1(@1 halt!), PSS >>> acpicpu9 at acpi0: C1(@1 halt!), PSS >>> acpicpu10 at acpi0: C1(@1 halt!), PSS >>> acpicpu11 at acpi0: C1(@1 halt!), PSS >>> acpipwrres5 at acpi0: FN00, resource for FAN0 >>> acpipwrres6 at acpi0: FN01, resource for FAN1 >>> acpipwrres7 at acpi0: FN02, resource for FAN2 >>> acpipwrres8 at acpi0: FN03, resource for FAN3 >>> acpipwrres9 at acpi0: FN04, resource for FAN4 >>> acpitz0 at acpi0: critical temperature is 119 degC >>> acpipwrres10 at acpi0: PIN_ >>> acpivideo0 at acpi0: GFX0 >>> acpivout0 at acpivideo0: DD1F >>> cpu0: Enhanced SpeedStep 1479 MHz: speeds: 1601, 1600, 1500, 1400, 1300, >>> 1200, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz >>> pci0 at mainbus0 bus 0 >>> pchb0 at pci0 dev 0 function 0 "Intel Core 10G Host" rev 0x00 >>> "Intel UHD Graphics" rev 0x04 at pci0 dev 2 function 0 not configured >>> pchtemp0 at pci0 dev 18 function 0 "Intel 400 Series Thermal" rev 0x00 >>> xhci0 at pci0 dev 20 function 0 "Intel 400 Series xHCI" rev 0x00: msi, >>> xHCI 1.10 >>> usb0 at xhci0: USB revision 3.0 >>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev >>> 3.00/1.00 addr 1 >>> "Intel 400 Series Shared SRAM" rev 0x00 at pci0 dev 20 function 2 not >>> configured >>> "Intel 400 Series MEI" rev 0x00 at pci0 dev 22 function 0 not configured >>> ahci0 at pci0 dev 23 function 0 "Intel 400 Series AHCI" rev 0x00: msi, >>> AHCI 1.3.1 >>> ahci0: PHY offline on port 0 >>> scsibus1 at ahci0: 32 targets >>> sdhc0 at pci0 dev 26 function 0 "Intel 400 Series eMMC" rev 0x00: apic 2 >>> int 16 >>> sdhc0: SDHC 3.00, 200 MHz base clock >>> sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma >>> ppb0 at pci0 dev 28 function 0 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci1 at ppb0 bus 1 >>> igc0 at pci1 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, >>> address 64:62:66:21:3c:4a >>> ppb1 at pci0 dev 28 function 5 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci2 at ppb1 bus 2 >>> igc1 at pci2 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, >>> address 64:62:66:21:3c:4b >>> ppb2 at pci0 dev 28 function 6 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci3 at ppb2 bus 3 >>> igc2 at pci3 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, >>> address 64:62:66:21:3c:4c >>> ppb3 at pci0 dev 28 function 7 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci4 at ppb3 bus 4 >>> igc3 at pci4 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, >>> address 64:62:66:21:3c:4d >>> ppb4 at pci0 dev 29 function 0 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci5 at ppb4 bus 5 >>> igc4 at pci5 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, >>> address 64:62:66:21:3c:4e >>> ppb5 at pci0 dev 29 function 1 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci6 at ppb5 bus 6 >>> igc5 at pci6 dev 0 function 0 "Intel I225-V" rev 0x03, msix, 4 queues, >>> address 64:62:66:21:3c:4f >>> ppb6 at pci0 dev 29 function 3 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci7 at ppb6 bus 7 >>> "Atheros QCA6174" rev 0x30 at pci7 dev 0 function 0 not configured >>> ppb7 at pci0 dev 29 function 4 "Intel 400 Series PCIE" rev 0xf0: msi >>> pci8 at ppb7 bus 8 >>> nvme0 at pci8 dev 0 function 0 vendor "Kingston", unknown product 0x5017 >>> rev 0x03: msix, NVMe 1.4 >>> nvme0: KINGSTON SNV2S2000G, firmware SBK00104, serial 50026B77850A1177 >>> scsibus2 at nvme0: 2 targets, initiator 0 >>> sd0 at scsibus2 targ 1 lun 0: <NVMe, KINGSTON SNV2S20, SBK0> >>> sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors >>> pcib0 at pci0 dev 31 function 0 "Intel 400 Series LPC" rev 0x00 >>> azalia0 at pci0 dev 31 function 3 "Intel 400 Series HD Audio" rev 0x00: msi >>> azalia0: codecs: Realtek ALC897, Intel/0x280b, using Realtek ALC897 >>> audio0 at azalia0 >>> ichiic0 at pci0 dev 31 function 4 "Intel 400 Series SMBus" rev 0x00: >>> apic 2 int 16 >>> iic0 at ichiic0 >>> spdmem0 at iic0 addr 0x50: 32GB DDR4 SDRAM PC4-21300 SO-DIMM >>> spdmem1 at iic0 addr 0x52: 32GB DDR4 SDRAM PC4-21300 SO-DIMM >>> "Intel 400 Series SPI" rev 0x00 at pci0 dev 31 function 5 not configured >>> isa0 at pcib0 >>> isadma0 at isa0 >>> pcppi0 at isa0 port 0x61 >>> spkr0 at pcppi0 >>> vmm0 at mainbus0: VMX/EPT >>> efifb0 at mainbus0: 3840x2160, 32bpp >>> wsdisplay0 at efifb0 mux 1 >>> wsdisplay0: screen 0-5 added (std, vt100 emulation) >>> uhub1 at uhub0 port 2 configuration 1 interface 0 "Apple, Inc. Keyboard >>> Hub" rev 2.00/94.15 addr 2 >>> uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple, Inc Apple >>> Keyboard" rev 2.00/0.67 addr 3 >>> uhidev0: iclass 3/1 >>> ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13 >>> wskbd0 at ukbd0 mux 1 >>> wskbd0: connecting to wsdisplay0 >>> uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple, Inc Apple >>> Keyboard" rev 2.00/0.67 addr 3 >>> uhidev1: iclass 3/0 >>> ucc0 at uhidev1: 7 usages, 7 keys, enum >>> wskbd1 at ucc0 mux 1 >>> wskbd1: connecting to wsdisplay0 >>> sdmmc0: can't enable card >>> ugen0 at uhub0 port 6 "Atheros Communications product 0x3004" rev >>> 1.10/0.01 addr 4 >>> vscsi0 at root >>> scsibus3 at vscsi0: 256 targets >>> softraid0 at root >>> scsibus4 at softraid0: 256 targets >>> root on sd0a (df9432d5d8eb9427.a) swap on sd0b dump on sd0b >>> <snap> >> >> Hello! >> >> Did you find a solution for this problem? >> I have exactly the same on an old i7-9600k that I use as a filer on 7.6 with >> all syspatches >> installed. >> >> All I get on the console is a bunch of: >> pmap_unwire: wiring for 0xfffffd876f7fe440 va 0xc0001e6000 didn't change >> the VA changes about every three occurrence and repeats. >> and then: >> Stopped at sleep_finish+0x22c: int $3 >> >> (dmesg to come, but currently running some memtest86) > > memtest finished four passes succesfully. > > dmesg: > OpenBSD 7.6 (GENERIC.MP) #1: Mon Feb 10 00:14:14 MST 2025 > r...@syspatch-76-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 34198122496 (32613MB) > avail mem = 33138024448 (31602MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x8aa9f000 (99 entries) > bios0: vendor American Megatrends Inc. version "2808" date 05/27/2020 > bios0: ASUSTeK COMPUTER INC. PRIME Z390-P > efi0 at bios0: UEFI 2.7 > efi0: American Megatrends rev 0x5000d > acpi0 at bios0: ACPI 6.1 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG WSMT SSDT SSDT SSDT HPET SSDT > SSDT UEFI LPIT SSDT SSDT > DBGP DBG2 DMAR SSDT > acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) PEGP(S4) > SIO1(S3) RP01(S4) > PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, 3700.01 MHz, 06-9e-0c, patch > 000000f8 > cpu0: cpuid 1 > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI, > MX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE > .1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND> > cpu0: cpuid 6 eax=27f7<SENSOR,ARAT> ecx=9<EFFFREQ> > cpu0: cpuid 7.0 > ebx=29c6fbf<FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLF > USHOPT,PT> ecx=40000000 > edx=bc002e00<SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD> > cpu0: cpuid a vers=4, gp=8, gpwidth=48, ff=3, ffwidth=48 > cpu0: cpuid d.1 eax=f<XSAVEOPT,XSAVEC,XGETBV1,XSAVES> > cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> > ecx=121<LAHF,ABM,3DNOWP> > cpu0: cpuid 80000007 edx=100<ITSC> > cpu0: msr 10a=a000c09<SKIP_L1DFL,MISC_PKG_CT,ENERGY_FILT,GDS_CTRL,RFDS_NO> > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 9MB > 64b/line 12-way L3 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, 3700.01 MHz, 06-9e-0c, patch > 000000f8 > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, 3700.01 MHz, 06-9e-0c, patch > 000000f8 > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, 3700.01 MHz, 06-9e-0c, patch > 000000f8 > cpu3: smt 0, core 3, package 0 > cpu4 at mainbus0: apid 8 (application processor) > cpu4: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, 3700.01 MHz, 06-9e-0c, patch > 000000f8 > cpu4: smt 0, core 4, package 0 > cpu5 at mainbus0: apid 10 (application processor) > cpu5: Intel(R) Core(TM) i5-9600K CPU @ 3.70GHz, 3700.00 MHz, 06-9e-0c, patch > 000000f8 > cpu5: smt 0, core 5, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 23999999 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PEG0) > acpiprt2 at acpi0: bus -1 (PEG1) > acpiprt3 at acpi0: bus -1 (PEG2) > acpiprt4 at acpi0: bus 3 (RP01) > acpiprt5 at acpi0: bus -1 (RP02) > acpiprt6 at acpi0: bus -1 (RP03) > acpiprt7 at acpi0: bus -1 (RP04) > acpiprt8 at acpi0: bus 4 (RP05) > acpiprt9 at acpi0: bus -1 (RP06) > acpiprt10 at acpi0: bus -1 (RP07) > acpiprt11 at acpi0: bus -1 (RP08) > acpiprt12 at acpi0: bus 5 (RP09) > acpiprt13 at acpi0: bus -1 (RP10) > acpiprt14 at acpi0: bus -1 (RP11) > acpiprt15 at acpi0: bus -1 (RP12) > acpiprt16 at acpi0: bus -1 (RP13) > acpiprt17 at acpi0: bus -1 (RP14) > acpiprt18 at acpi0: bus -1 (RP15) > acpiprt19 at acpi0: bus -1 (RP16) > acpiprt20 at acpi0: bus 2 (RP17) > acpiprt21 at acpi0: bus -1 (RP18) > acpiprt22 at acpi0: bus -1 (RP19) > acpiprt23 at acpi0: bus -1 (RP20) > acpiprt24 at acpi0: bus -1 (RP21) > acpiprt25 at acpi0: bus -1 (RP22) > acpiprt26 at acpi0: bus -1 (RP23) > acpiprt27 at acpi0: bus -1 (RP24) > acpiec0 at acpi0: not present > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > "PNP0C14" at acpi0 not configured > "ACPI000E" at acpi0 not configured > acpibtn0 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > intelpmc0 at acpi0: PEPD > state 0: 0x7f:1:2:0x00:0x0000000000000060 > counter: 0x7f:64:0:0x00:0x0000000000000632 > frequency: 0 > state 1: 0x7f:1:2:0x00:0x0000000000000060 > counter: 0x00:32:0:0x03:0x00000000fe00193c > frequency: 10000 > acpibtn1 at acpi0: PWRB > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpipwrres0 at acpi0: USBC, resource for XDCI > acpipwrres1 at acpi0: V0PR > acpipwrres2 at acpi0: V1PR > acpipwrres3 at acpi0: V2PR > acpipwrres4 at acpi0: WRST > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@120 mwait.1@0x32), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@120 mwait.1@0x32), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@120 mwait.1@0x32), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@120 mwait.1@0x32), > C1(1000@1 mwait.1), PSS > acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@120 mwait.1@0x32), > C1(1000@1 mwait.1), PSS > acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@120 mwait.1@0x32), > C1(1000@1 mwait.1), PSS > acpipwrres5 at acpi0: FN00, resource for FAN0 > acpipwrres6 at acpi0: FN01, resource for FAN1 > acpipwrres7 at acpi0: FN02, resource for FAN2 > acpipwrres8 at acpi0: FN03, resource for FAN3 > acpipwrres9 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 119 degC > acpipwrres10 at acpi0: PIN_ > acpivideo0 at acpi0: GFX0 > cpu0: using VERW MDS workaround > cpu0: Enhanced SpeedStep 3700 MHz: speeds: 3701, 3700, 3500, 3300, 3100, > 2900, 2700, 2500, 2200, > 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x0a > ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x0a: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 00:1b:21:3a:16:92 > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 630" rev 0x00 > drm0 at inteldrm0 > inteldrm0: msi, COFFEELAKE, gen 9 > xhci0 at pci0 dev 20 function 0 "Intel 300 Series xHCI" rev 0x10: msi, xHCI > 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 > addr 1 > "Intel 300 Series Shared SRAM" rev 0x10 at pci0 dev 20 function 2 not > configured > "Intel 300 Series HECI" rev 0x10 at pci0 dev 22 function 0 not configured > ahci0 at pci0 dev 23 function 0 "Intel 300 Series AHCI" rev 0x10: msi, AHCI > 1.3.1 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 6.0Gb/s > ahci0: port 2: 6.0Gb/s > ahci0: port 3: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, ST10000NT001-3LY, EN01> > naa.5000c500f7cff7d0 > sd0: 9537536MB, 512 bytes/sector, 19532873728 sectors > sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD101EFBX-68, 85.0> > naa.5000cca0d8d97099 > sd1: 9537536MB, 512 bytes/sector, 19532873728 sectors > sd2 at scsibus1 targ 2 lun 0: <ATA, ST4000DM004-2CV1, 0001> > naa.5000c500c8e0cc66 > sd2: 3815447MB, 512 bytes/sector, 7814037168 sectors > sd3 at scsibus1 targ 3 lun 0: <ATA, WDC WD40EZAZ-19S, 80.0> > naa.50014ee26908d4f9 > sd3: 3815447MB, 512 bytes/sector, 7814037168 sectors, thin > ppb1 at pci0 dev 27 function 0 "Intel 300 Series PCIE" rev 0xf0: msi > pci2 at ppb1 bus 2 > nvme0 at pci2 dev 0 function 0 vendor "Realtek", unknown product 0x5765 rev > 0x01: msix, NVMe 1.4 > nvme0: Patriot M.2 P300 512GB, firmware VC3S5007, serial P300WCBA24090607141 > scsibus2 at nvme0: 2 targets, initiator 0 > sd4 at scsibus2 targ 1 lun 0: <NVMe, Patriot M.2 P300, VC3S> > sd4: 488386MB, 512 bytes/sector, 1000215216 sectors > ppb2 at pci0 dev 28 function 0 "Intel 300 Series PCIE" rev 0xf0 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 4 "Intel 300 Series PCIE" rev 0xf0: msi > pci4 at ppb3 bus 4 > re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H > (0x5400), msi, address > 00:1b:21:3a:16:92 > rgephy0 at re0 phy 7: RTL8251, rev. 0 > ppb4 at pci0 dev 29 function 0 "Intel 300 Series PCIE" rev 0xf0: msi > pci5 at ppb4 bus 5 > nvme1 at pci5 dev 0 function 0 unknown vendor 0x1e4b product 0x1202 rev 0x01: > msix, NVMe 1.4 > nvme1: SPCC M.2 PCIe SSD, firmware SN14243, serial 92FD500B33494A58C95E > scsibus3 at nvme1: 2 targets, initiator 0 > sd5 at scsibus3 targ 1 lun 0: <NVMe, SPCC M.2 PCIe SS, SN14> > sd5: 488386MB, 512 bytes/sector, 1000215216 sectors > pcib0 at pci0 dev 31 function 0 "Intel Z390 LPC" rev 0x10 > ichiic0 at pci0 dev 31 function 4 "Intel 300 Series SMBus" rev 0x10: apic 2 > int 16 > iic0 at ichiic0 > iic0: addr 0x20 0b=22 0c=22 0d=cc 0e=cc 0f=44 10=43 13=73 15=ab 16=1d 17=a5 > 19=ca 1a=51 1b=68 1c=22 > 1d=0f 1e=0c 20=90 21=60 22=47 23=44 2a=2a 2d=22 2e=dd 2f=44 31=73 33=ab 34=01 > 35=69 37=8a 38=51 > 39=0f 3a=0c 3b=45 3c=44 44=24 48=07 92=0b b2=29 words 00=00ff 01=00ff 02=00ff > 03=00ff 04=00ff > 05=00ff 06=00ff 07=00ff > spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-17000 > spdmem1 at iic0 addr 0x51: 8GB DDR4 SDRAM PC4-17000 > spdmem2 at iic0 addr 0x52: 8GB DDR4 SDRAM PC4-17000 > spdmem3 at iic0 addr 0x53: 8GB DDR4 SDRAM PC4-17000 > "Intel 300 Series SPI" rev 0x10 at pci0 dev 31 function 5 not configured > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Fujitsu Component Type 6 > Keyboard" rev > 1.00/1.01 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd1 at ukbd0 mux 1 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > softraid0: sd6 was not shutdown properly > sd6 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1C, 006> > sd6: 481281MB, 512 bytes/sector, 985665499 sectors > root on sd6a (ed3c9095fbee4e3c.a) swap on sd6b dump on sd6b > WARNING: / was not properly unmounted > WARNING: clock gained 3 days > WARNING: CHECK AND RESET THE DATE! > drm:pid0:intel_ddi_sanitize_encoder_pll_mapping *NOTICE* [drm] > [ENCODER:94:DDI B/PHY B] is > disabled/in DSI mode with an ungated DDI clock, gate it > inteldrm0: 1280x1024, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > softraid0: sd7 was not shutdown properly > softraid0: sd7 was not shutdown properly > sd7 at scsibus5 targ 2 lun 0: <OPENBSD, SR RAID 1C, 006> > sd7: 9537535MB, 512 bytes/sector, 19532873103 sectors > softraid0: sd8 was not shutdown properly > softraid0: sd8 was not shutdown properly > sd8 at scsibus5 targ 3 lun 0: <OPENBSD, SR RAID 1C, 006> > sd8: 3815447MB, 512 bytes/sector, 7814036543 sectors Just got another crash, with a complete panic this time (copied by hand from a phone picture): disk_unbusy: sd5: dk_busy < 0 panic: biodone already Stopped at db_enter+0x14: popq %rbp TID PID UID PRFLAGS PFLAGS CPU COMMAND db_enter() at db_enter+0x14 panic(ffffffff8235abc1) at panic+0xdd biodone(ffff8000006c0500) at biodone+0x105 sd_buf_done(fffffd86d20e3ce0) at sd_buf_done+0x121 scsi_done(fffffd86d20e3ce0) at scsi_done+0x31 nvme_q_complete(ffff800000622000,ffff800000621a80) at nvme_q_complete+0x134 nvme_intr(ffff800000622000) at nvme_intr+0x46 intr_handler(ffff800049ab2eb0,ffff800000621a00) at intr_handler+0x91 Xintr_ioapic_edge26_untramp() at Xintr_ioapic_edge26_untramp+0x18f acpicpu_idle() at acpicpu_idle+0x239 sched_idle(ffffffff8277aff0) at sched_idle+0x298 end trace frame: 0x0, count: 4 ddb{0}> at that point the USB keyboard is non functional. It looks similar to the one reported by Joerg. This crash was way faster than the previous ones (months or weeks/days), it happened in a matter of hours. Is it an indication that the nvme disk (sd5, NVMe, SPCC M.2 PCIe SS, SN14) is going bad? I'll try to hook up a serial console to this machine, if there's a onboard port. Anything else I can try next time this happens, or before? Best, Mickael
