To be sure: this is not "near the end of sysupgrade" - the isntaller hasn't evene started upgrading anything, as your filesystems can't even be mounted.
On Mar 04 09:17:05, h...@stare.cz wrote: > On Mar 04 20:57:04, avo...@xtra.co.nz wrote: > > THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY: > > ffs: fa50b3edace170b1.e (/var) > > Automatic file system check failed: help! > > Enter pathname of shell or RETURN for sh: > > > > wrdl5# fsck -t ffs /dev/sd1e > > ** /dev/rsd1e > > > > CANNOT READ: BLK 128 > > CONTINUE? [Fyn] y > > > > THE FOLLOWING DISK SECTORS COULD NOT BE READ: 128, 129, 130, 131, > > 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, > > /dev/rsd1e: CANNOT READ DISKLABEL > > wrdl5# > > > > The laptop concerned is a Dell M6600 circa 2011 that I have > > owned since it was new. All internal components are original > > including the 2 750Gb spinning disks. > > > > Is the fsck failed partition recoverable, or should I assume > > the sd1 disk is at end of (a long) life? > > Make sure to destroy that disk > so that no-one will try to use it. > > Get a SSD; those are reasonably cheap now > and the machine will be considerably faster. > > Better yet, replace both disks with SSDs. > > Then restore from backups, obviously. > > > Jan > > > > OpenBSD 7.6-current (GENERIC.MP) #523: Thu Jan 30 18:52:21 MST 2025 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 17035309056 (16246MB) > > avail mem = 16495280128 (15731MB) > > random: good seed from bootblocks > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf1ed0 (109 entries) > > bios0: vendor Dell Inc. version "A18" date 09/14/2018 > > bios0: Dell Inc. Precision M6600 > > efi0 at bios0: UEFI 2.0 > > acpi0 at bios0: ACPI 4.0 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP APIC TCPA SSDT MCFG HPET BOOT SSDT SSDT SLIC SSDT > > acpi0: wakeup devices UAR1(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) RP01(S4) > > PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) > > PXSX(S4) RP06(S4) [...] > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.87 MHz, 06-2a-07, > > patch 0000002f > > cpu0: cpuid 1 > > edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > > > ecx=17bae3ff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX> > > cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ> > > cpu0: cpuid 7.0 edx=9c000400<MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD> > > cpu0: cpuid a vers=3, gp=8, gpwidth=48, ff=3, ffwidth=48 > > cpu0: cpuid d.1 eax=1<XSAVEOPT> > > cpu0: cpuid 80000001 edx=28100800<NXE,RDTSCP,LONG> ecx=1<LAHF> > > cpu0: cpuid 80000007 edx=100<ITSC> > > cpu0: MELTDOWN > > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > > 64b/line 8-way L2 cache, 8MB 64b/line 16-way L3 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 2 (application processor) > > cpu1: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.92 MHz, 06-2a-07, > > patch 0000002f > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 4 (application processor) > > cpu2: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2294.99 MHz, 06-2a-07, > > patch 0000002f > > cpu2: smt 0, core 2, package 0 > > cpu3 at mainbus0: apid 6 (application processor) > > cpu3: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz, 2295.08 MHz, 06-2a-07, > > patch 0000002f > > cpu3: smt 0, core 3, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (P0P1) > > acpiprt2 at acpi0: bus 2 (RP01) > > acpiprt3 at acpi0: bus 3 (RP02) > > acpiprt4 at acpi0: bus 4 (RP03) > > acpiprt5 at acpi0: bus 10 (RP04) > > acpiprt6 at acpi0: bus -1 (RP05) > > acpiprt7 at acpi0: bus -1 (RP06) > > acpiprt8 at acpi0: bus -1 (RP07) > > acpiprt9 at acpi0: bus 11 (RP08) > > acpiprt10 at acpi0: bus 1 (PEG0) > > acpiprt11 at acpi0: bus -1 (PEG1) > > acpiprt12 at acpi0: bus -1 (PEG2) > > acpiprt13 at acpi0: bus -1 (PEG3) > > acpiec0 at acpi0 > > acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo > > "SMO8800" at acpi0 not configured > > acpibtn0 at acpi0: LID_(wakeup) > > acpibtn1 at acpi0: PBTN(wakeup) > > acpibtn2 at acpi0: SBTN > > acpiac0 at acpi0: AC unit online > > acpibat0 at acpi0: BAT0 model "DELL HPNYM17" serial 416 type LION oem "SMP" > > "*pnp0c14" at acpi0 not configured > > acpicpu0 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C3(200@109 mwait.1@0x30), C2(500@80 mwait.1@0x10), > > C1(1000@1 mwait.1), PSS > > acpitz0 at acpi0: critical temperature is 107 degC > > acpivideo0 at acpi0: VID_ > > acpivout0 at acpivideo0: LCD_ > > acpivideo1 at acpi0: VID_ > > acpivout1 at acpivideo1: LCD_ > > cpu0: using VERW MDS workaround (except on vmm entry) > > cpu0: Enhanced SpeedStep 2294 MHz: speeds: 2301, 2300, 2000, 1800, 1600, > > 1400, 1200, 1000, 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > > ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi > > pci1 at ppb0 bus 1 > > vendor "NVIDIA", unknown product 0x0e3a (class display subclass VGA, rev > > 0xa1) at pci1 dev 0 function 0 not configured > > azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0beb > > rev 0xa1: msi > > azalia0: no supported codecs > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi, SANDYBRIDGE, gen 6 > > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 16 com > > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > > com4: probed fifo depth: 0 bytes > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > d0:67:e5:3b:30:67 > > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia1 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > > azalia1: codecs: IDT/0x76e7 > > audio0 at azalia1 > > ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > > pci2 at ppb1 bus 2 > > ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi > > pci3 at ppb2 bus 3 > > iwn0 at pci3 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x35: > > msi, MIMO 3T3R, MoW, address 24:77:03:07:03:10 > > ppb3 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > > pci4 at ppb3 bus 4 > > re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D > > (0x2800), msi, address 00:0a:cd:24:69:46 > > rgephy0 at re0 phy 7: RTL8169S/8110S/8211, rev. 2 > > ppb4 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi > > pci5 at ppb4 bus 10 > > xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msix, xHCI 0.96 > > usb1 at xhci0: USB revision 3.0 > > uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00 > > addr 1 > > ppb5 at pci0 dev 28 function 7 "Intel 6 Series PCIE" rev 0xb4: msi > > pci6 at ppb5 bus 11 > > vendor "O2 Micro", unknown product 0x11f7 (class serial bus subclass > > Firewire, rev 0x05) at pci6 dev 0 function 0 not configured > > sdhc0 at pci6 dev 0 function 1 vendor "O2 Micro", unknown product 0x8320 > > rev 0x05: apic 2 int 16 > > sdhc0: SDHC 2.00, 50 MHz base clock > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > vendor "O2 Micro", unknown product 0x8330 (class mass storage subclass > > miscellaneous, rev 0x05) at pci6 dev 0 function 2 not configured > > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > ahci0: port 0: 3.0Gb/s > > ahci0: port 1: 3.0Gb/s > > ahci0: port 3: 1.5Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> > > naa.50014ee6ac3998b0 > > sd0: 715404MB, 512 bytes/sector, 1465149168 sectors > > sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD7500BPKT-7, 01.0> > > naa.50014ee6018f0fe9 > > sd1: 715404MB, 512 bytes/sector, 1465149168 sectors > > cd0 at scsibus1 targ 3 lun 0: <MATSHITA, BD-RE UJ242, 1.11> removable > > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > lisa0 at iic0 addr 0x1d: lis331dl > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > efifb at mainbus0 not configured > > uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > uhub4 at uhub3 port 1 configuration 1 interface 0 "Dell product 0x2513" rev > > 2.00/a0.05 addr 3 > > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical > > Mouse" rev 2.00/63.00 addr 4 > > uhidev0: iclass 3/1 > > ums0 at uhidev0: 3 buttons, Z dir > > wsmouse1 at ums0 mux 0 > > uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech USB Keyboard" > > rev 1.10/64.00 addr 5 > > uhidev1: iclass 3/1 > > ukbd0 at uhidev1: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > uhidev2 at uhub4 port 3 configuration 1 interface 1 "Logitech USB Keyboard" > > rev 1.10/64.00 addr 5 > > uhidev2: iclass 3/0, 3 report ids > > ucc0 at uhidev2 reportid 1: 2 usages, 3 keys, enum > > wskbd2 at ucc0 mux 1 > > uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0 > > ucc1 at uhidev2 reportid 3: 21 usages, 14 keys, enum > > wskbd3 at ucc1 mux 1 > > uhub5 at uhub3 port 2 configuration 1 interface 0 "Dell product 0x2513" rev > > 2.00/a0.05 addr 6 > > uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > ugen0 at uhub6 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd1a (fa50b3edace170b1.a) swap on sd1b dump on sd1b > > inteldrm0: 1920x1080, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wskbd1: connecting to wsdisplay0 > > wskbd2: connecting to wsdisplay0 > > wskbd3: connecting to wsdisplay0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > iwn0: radio is disabled by hardware switch > > > > -- > > aer > > > >
